Help!!! need to get o-rings for my penelope!!!

[kamasu]

anyone know the sizes or where to get the o-rings for the penelope

 

[LongDraw]

For sizes try the sticky threads above, the official penelope thread, or actually i think there is one that says something about oring guide.

This is where I have ordered my orings, had everything but shipping was kinda high:

https://www.oringsusa.com/catalog/index.php?cPath=482_488

 

[tobarger]

There are only three o-rings in the Penelope

Inner diameter x Cross section (thickness) in Millimeters
1) 11 x 1.5 Base
2) 8 x 3 Top Cap
3) 1.78 x 1.78 Under Center Post (.07 x .07 inches)

 

[kamasu]

There are only three o-rings in the Penelope

Inner diameter x Cross section (thickness) in Millimeters
1) 11 x 1.5 Base
2) 8 x 3 Top Cap
3) 1.78 x 1.78 Under the Center Post (.07 x .07 inches)

Thank you!!!!

 

[kamasu]

For sizes try the sticky threads above, the official penelope thread, or actually i think there is one that says something about oring guide.

This is where I have ordered my orings, had everything but shipping was kinda high:

https://www.oringsusa.com/catalog/index.php?cPath=482_488

Awesome thank you yeah i tried looking at the o-ring guide nothing on the penelope. Do you own a penelope and bought o-rings from that site? because i cant find the size for under the center post that tobarger posted.

 

[tobarger]

i cant find the size for under the center post that tobarger posted.

1.78 x 1.78 mm = .07 x .07 inches (BN70 -004)
oringsUSA

You have to look under "O-Rings By Sizes" => "Inch Size"
https://www.oringsusa.com/catalog/index.php?cPath=471

Its a little tricky navigating the oringsUSA site

 

[LongHaul]

Is the center post oring the same size as the ody

 

[tobarger]

For short mode Oddy, should be the same as Penelope
http://ggwiki.et.com.mx/index.php/O-Rings