Does anything have airflow from the bottom and possibly even the sides? Like the avocado would be amazing if they could pipe in airflow from the bottom somehow (I think, something about its design leaves flavor to be desired).
Help needed for RTA and RDA selection-im too far behind
- Thread starter BrokenLung
- Start date
- th_trl_thread_readers 0
- Status
Authentic OBS Engine NANO RTA Silver 5.3ml 25mm Rebuildable Atomizer
Newest one out. Has single coil for building and side airflow
Newest one out. Has single coil for building and side airflow
Authentic OBS Engine NANO RTA Silver 5.3ml 25mm Rebuildable Atomizer
Newest one out. Has single coil for building and side airflow
OMG, I just got the griffin 25.
I was getting some pretty bad leaking. I think I am doing things out of order. Like open the air flow then the juice flow? I wasted about an entire tank because it wasn't all the way threaded together. This is definitely for the high wattage vapors, I see how someone could kick this thing at like 80 watts and blow stupid clouds.
Here is my first attempt at a build
I kind of tucked the cotton tails in so they were covering the holes but not down in them
Great tank for temp control, very stable in the atomizer analyzer. Gold/silver plated 510 pins seem to help.
Sent from my XT1585 using Tapatalk
Last edited:
Authentic OBS Engine NANO RTA Silver 5.3ml 25mm Rebuildable Atomizer
Newest one out. Has single coil for building and side airflow
I don't think the tank in the link I posted has even reached the US yet. But it something I thought you may like.OMG, I just got the griffin 25.
I was getting some pretty bad leaking. I think I am doing things out of order. Like open the air flow then the juice flow? I wasted about an entire tank because it wasn't all the way threaded together. This is definitely for the high wattage vapors, I see how someone could kick this thing at like 80 watts and blow stupid clouds.
Here is my first attempt at a build
I kind of tucked the cotton tails in so they were covering the holes but not down in them
Great tank for temp control, very stable in the atomizer analyzer. Gold/silver plated 510 pins seem to help.
Not bad for a first build. I would have put more cotton but this is how you learn. What ohms are you getting?
The cotton on the right was actually replaced. It was too whispy. Im going to build coils and wick them like I have for years unless I learn something new?
It is a little hard to get a perfectly centered coil when working with NI 200. You start moving it too much and pop, you start over. I thought they were decently centered.
Smackysy- it looks like you have a different set up there? Is that like a V1? Honestly I prefer those kind of air openings versus the 'kennedy' style.
Sugar and spice I appreciate it, ill definitely give it a look. I just don't see tanks like these griffins not blowing crazy clouds. Right now im using 50/50 juice, im scared of a good coil like a clapton or something and 100%VG (ill be one of them... . I am getting 0.03 ohms using my semi-twist Ni-200 wire and im using it in temp control mode.I tried to make a clapton and failed so until I set up some kinda rig or something no claptons for me . Well, a friend is sending me one but im not sure its capable of TC.
Anyone look at the aromamizer plus? But I really want a not cloud tank...
It is a little hard to get a perfectly centered coil when working with NI 200. You start moving it too much and pop, you start over. I thought they were decently centered.
Smackysy- it looks like you have a different set up there? Is that like a V1? Honestly I prefer those kind of air openings versus the 'kennedy' style.
Sugar and spice I appreciate it, ill definitely give it a look. I just don't see tanks like these griffins not blowing crazy clouds. Right now im using 50/50 juice, im scared of a good coil like a clapton or something and 100%VG (ill be one of them...
. I am getting 0.03 ohms using my semi-twist Ni-200 wire and im using it in temp control mode.I tried to make a clapton and failed so until I set up some kinda rig or something no claptons for me . Well, a friend is sending me one but im not sure its capable of TC. Anyone look at the aromamizer plus? But I really want a not cloud tank...
Yeah, the cotton build was in my V1 Griffin..the bare clapton build above is in my RTA-2..The cotton on the right was actually replaced. It was too whispy. Im going to build coils and wick them like I have for years unless I learn something new?
It is a little hard to get a perfectly centered coil when working with NI 200. You start moving it too much and pop, you start over. I thought they were decently centered.
Smackysy- it looks like you have a different set up there? Is that like a V1? Honestly I prefer those kind of air openings versus the 'kennedy' style.
Sugar and spice I appreciate it, ill definitely give it a look. I just don't see tanks like these griffins not blowing crazy clouds. Right now im using 50/50 juice, im scared of a good coil like a clapton or something and 100%VG (ill be one of them...
Anyone look at the aromamizer plus? But I really want a not cloud tank...
Personally I don't use TC with any of my builds.. keeping it simple and easy with power (watts) keeps me vaping instead of building, lol
BTW, I use clapton wire, (24x32) Kanthel, 7 wraps or so on a 3mm bit for about 0.21 ohms for dual coils..
It's a really simple build that is easy to install in any velocity style deck..and performance is very good with no dry hits or leaks.. just my extra 2¢, lol
Sent from my XT1585 using Tapatalk
Last edited:
I absolutely can't deal with things that are hard to build on. I have arthritis and frustration lol.
With the 25+ once I fill the tank (air closed, juice feed closed) I put the top cap back on it and then open the air flow then the juice? Or should I open the air flow before putting the top cap back on it? I am doing something leaking juice everywhere. So what is the proper order of things?
With the 25+ once I fill the tank (air closed, juice feed closed) I put the top cap back on it and then open the air flow then the juice? Or should I open the air flow before putting the top cap back on it? I am doing something leaking juice everywhere. So what is the proper order of things?
Here is my first attempt at a clapton. 24 gauge SS core with 36 gauge nichrome wrap ( could have made 2 coils in hindsight) but it is working and actually working in temp control.
The Ijoy Limitless (and Limitless+, Ijoy Combo, Ijoy Classic), Aromamizer Supreme, and Obs Engine. I don't use RDAs so can't comment on that.
Sent from my K6000 Pro using Tapatalk
Sent from my K6000 Pro using Tapatalk
When I fill my griffin 25+ I never close either airflow. Just the juice flow. Hasn't leaked yet. And I kinda poke some wick down in the holes when I wick it. Just enough that you can see it when you look up from the juice channel.
- Status
Similar threads
