Help? Not Responding - Ego Twist with E1- Clearomizer

Status
Not open for further replies.

Almost10

Full Member
Nov 9, 2012
5
1
39
Tucson, AZ
I just got this in the mail tonight, my first e-cig ever. I filled the clearomizer with some juice from a local store, made sure the battery blinked five times to show that it had enough charge, pressed the button, which lit up, and there is nothing happening. I really can't find a solution through searches in the forums or online. Anyone have suggestions? I hope so, and thanks in advance.
 

Ryedan

ECF Guru
ECF Veteran
Verified Member
Mar 31, 2012
12,869
19,652
Ontario, Canada
I just got this in the mail tonight, my first e-cig ever. I filled the clearomizer with some juice from a local store, made sure the battery blinked five times to show that it had enough charge, pressed the button, which lit up, and there is nothing happening. I really can't find a solution through searches in the forums or online. Anyone have suggestions? I hope so, and thanks in advance.

Almost10, it is probably a good idea to charge the new Twist battery before first use. Having said that, if you press the button and the light illuminates steady, power from the battery is good. If there is not enough power in the battery, it will flash like 10 times and then turn itself off.

I see 2 possibilities here. Like gardnerd4me said, the center post in the Twist could be pushed down. Or the clearo could be bad. Never screw the clearo onto the Twist tightly - that will push the center post down.

If you screw the clearo onto the Twist and it does not get snug before the clearo bottoms on to the Twist, the Twist's center post is likely low. If the clearo gets snug when you screw it on before it bottoms onto the Twist, the clearo is likely bad. Deal with the guys you bought it from to resolve the issue.

If you think the center post in the Twist is pushed down, talk to the guys you bought it from. Unless you screwed the clearo on tight, it is a battery issue from the manufacturer and they should help you.
 

TraceyS

Ultra Member
ECF Veteran
Verified Member
Oct 17, 2012
2,442
7,226
Blacksburg, Virginia
Is the clearo a clearomizer with the atty inside? If so, same thing happened to me when I got the Kanger T2....the atty inside the tank was not screwed all the way in. I was upset then found a youtube video talking about the Kanger T2 and when he showed how to change the heads out I checked and it was not screwed all the way in. whew!

Tracey
 
Status
Not open for further replies.

Users who are viewing this thread