Help! Tired of V2, what's next and need Cnd supplier

[ladyrae]

Hi,

So I'm ready to move on from V2. It was great to start with but I'm ready for something better. Also, need a Cdn supplier. I've read some stuff about Vapour King and clearomizers - not sure really what to get...

Can you recommend a "starter kit" and Cdn supplier for me?

Thanks

 

[Vapoor eyes er]

Hi and welcome to ECF. After 5 posts wait 1 hr for the servers to reset and
http://www.e-cigarette-forum.com/fo...w-nic-supplier-list-via-pm-only-part-2-a.html
Just say hello to others, congrats, etc.

 

[ladyrae]

Thanks for the info.

 

[Vapoor eyes er]

Thanks for the info.

You're welcome. Are you looking for a "cig sized" ecig? As far as clearomizers go you're best to spend a little extra and purchase the rebuildables- heads (coil+ wick) last 10? weeks with maintenance and when the head finally bites the dust simply replace the head- takes 10 secs and costs about +-$2.00.

 

[ladyrae]

Sounds good...but it's all greek to me. I'd like something simple that gives me more vapour than V2 and doesn't have cotton like cartridges.

 

[ladyrae]

I do like the idea of it looking something like an analog but overall that's not a top priority.

 

[03FXDWG]

I am fairly new myself (2+ months) but I think your next step would be an Ego style battery with an EVOD tank or possibly an iClear Clearomizer. That is what I started with and later added a V2 type (KR808 with mini clearos) kit for stealth (bathroom) breaks.

Edited to add: Just saw the "small" requirement so maybe a 510 style pen device is more to your liking. I don't like messing with cartos/cartridges at all so I stick with Clearomizers & tanks. If you were using a V2 with the cartridges, just switching to the mini clearos might be all you need at this step.

Edited again to add: I get lots of vapor from my mini clearos on my KR808s.

 

[Vapoor eyes er]

Sounds good...but it's all greek to me. I'd like something simple that gives me more vapour than V2 and doesn't have cotton like cartridges.

Clearomizers have NO filler or stuffing and rely on silica wicks that are saturated in the juice. Juice is drawn to an area of the wick around which are the coils are wrapped that vaporize the juice. There are top coil clearos which give a warmer vape (coil is at the top of tank) and bottom coil clearos which give a cooler cape (coil is at bottom of tank).
Here's a drawing of a top coil clearo. With a bottom coil clearo the head (wick+ coil) would be on the bottom.

 

[Vapoor eyes er]

I do like the idea of it looking something like an analog but overall that's not a top priority.

Seeing as the V2 is a set voltage PV then if you really wanted to "upgrade" prolly the best route would be a Spinner or Twist- they're both variable voltage and you can adjust the voltage from 3.3- 4.8 volts. I own both and prefer the Spinner because the voltage markings are more visible and although 1 mm wider than the Twist it's shorter- comes in 400, 650, 900, 1100 and 1300 mh. 100 mah= approx. 1 hour of vaping before recharge.
Here's a review by highly regarded Canuck VaporChase- realize he's using the 1300 mah. Importing hardware from the U.S. is no problem with Customs BUT juice is another matter.

 

[OzarkTroutBum]

Sounds good...but it's all greek to me. I'd like something simple that gives me more vapour than V2 and doesn't have cotton like cartridges.

You can try an Esmart clearomizer with your same 808 batteries. These are the same units that V2 sells for almost $5 a piece. The make great vapor and you can fill with whatever liquid you like.

 

[ladyrae]

You can try an Esmart clearomizer with your same 808 batteries. These are the same units that V2 sells for almost $5 a piece. The make great vapor and you can fill with whatever liquid you like.

They don't ship to Canada...do you know of a Cdn supplier?

 

[Vapoor eyes er]

They don't ship to Canada...do you know of a Cdn supplier?

https://www.canvape.com/product-p/808dsmart.htm