Help with choosing the best tank set up for Provari

[***Shannon***]

Hi all....I will be purchasing a Provari tomorrow and am interested in also getting a tank. I have never used one before and would like help in choosing the best tank set-up (preferably with no leaks) that would work good with my Provari. Thank you once again for all of your help. I'd be lost without this forum.

 

[jamentertainment]

Hi Shannon, I also have a Provari and I use a Madvapes 5ml tank with a smoktech dual coil carto also found on madvapes..the tank is $12 dollors and works really well..the carto that comes with this tank setup is 1.6 ohm and will not work with the provari, so buy extra cartos. the cartos are $2.29 each and are pre punched..I use 2ohm but the have 2.5 and 3 ohm as well...congrats on the provari

http://www.madvapes.com/Dual-Coil-510-Tank-Cartomizer_p_3324.html

 

[Dieseler]

Well the cartzilla and the vision stone tank both the same type ce2 tank just came out and i have to say i cant put them down no leaks no gaskets .
They have screw on top and bottom caps.........ssshhhh dont tell too many i want to hoard as many as i can and one vendor is already out of stock out of the 2 that are currently selling them.

 

[jacquelyn]

There a a few good ones. I have a map dc tank I purchased it at a store though. I am waiting for the next batch of lavatanks to be available.

 

[kabonk]

I bought this one because it matches so well: https://www.vaporescence.com/index....age=flypage_new.tpl&product_id=460&Itemid=340
but this one is cheaper and it looks about the same size: BDV Lil' Mama 3ml Bare Tank with Stainless Steel Caps - $30.99 : Big Daddy Vapor
and the I have a j-tank its a little bit thinner then the provari J-TANK
and I bought a hand full of these $4.65 you can beat the price SMOKTech 510 Dual Coil Tank Tube

 

[tj99959]

A 3ohm carto in a J-tank is as good as it gets on a VV in my book. With VV I can just make it whistle any tune that I want depending on my mood.
Bling is a personal matter, and who is to say what you might like.
My daughter is trying to get me to cut her some end caps from a block of rhodonite that I have (yes it's pink), but oh man would that be a lot of work!

 

[***Shannon***]

Ok...so I ordered what you suggested with two extra 2ohm cartos. Hope I know how to use this thing when I get it...ha!! Thank you for your suggestion. I am also going to order the Vision Stone Tank Mod from GotVapes. I will start there and move forward as I learn more about the tanks and the Provari. Thanks again!!!!

Hi Shannon, I also have a Provari and I use a Madvapes 5ml tank with a smoktech dual coil carto also found on madvapes..the tank is $12 dollors and works really well..the carto that comes with this tank setup is 1.6 ohm and will not work with the provari, so buy extra cartos. the cartos are $2.29 each and are pre punched..I use 2ohm but the have 2.5 and 3 ohm as well...congrats on the provari

Dual Coil 510 Tank Cartomizer

 

[Murdock Ruml]

The GTUS is supposed to be great for the provari. Only problem is it is only available through a CO-OP that has already closed. I am currently waitingto get mine. I will let you know how it is once I get it. Keep your eyes on the classifieds because some might turn up there.

 

[slumdog]

Hi Shannon, I also have a Provari and I use a Madvapes 5ml tank with a smoktech dual coil carto also found on madvapes..the tank is $12 dollors and works really well..the carto that comes with this tank setup is 1.6 ohm and will not work with the provari, so buy extra cartos. the cartos are $2.29 each and are pre punched..I use 2ohm but the have 2.5 and 3 ohm as well...congrats on the provari

Dual Coil 510 Tank Cartomizer

+1 and they have the ss ones that match the provari..... no leaks works great just dont let the juice get to low.... the 3 ohm ones are great if ya want a nice cool 5.5 to 6v vape

edit... late to this party huh.... maybe i shoud read through in the future..... Challenge Accepted..

 

[***Shannon***]

Well the cartzilla and the vision stone tank both the same type ce2 tank just came out and i have to say i cant put them down no leaks no gaskets .
They have screw on top and bottom caps.........ssshhhh dont tell too many i want to hoard as many as i can and one vendor is already out of stock out of the 2 that are currently selling them.

I just placed an order with GotVapes for the Vision Stone Tank. Thanks for the suggestion.

 

[***Shannon***]

+1 and they have the ss ones that match the provari..... no leaks works great just dont let the juice get to low.... the 3 ohm ones are great if ya want a nice cool 5.5 to 6v vape

I am new to the whole vv thing. What volts do I vape with a 2ohm?

 

[vaptamist]

I am new to the whole vv thing. What volts do I vape with a 2ohm?

Depends on the juice and your preferences - but I would start at 3.7volts and work your way up to about 4.5volts. You can go higher than that, but you should find a sweet spot between those two voltages.

 

[MikenGA]

What volts do I vape with a 2ohm?

The volts you LIKE BEST!

I should have my Stone Tank by Saturday, and I SO hope I'm gonna like it!

 

[bjameslynch]

Question to anyone with a stone tank: How's the vapor? I've gotten used to a really warm vape with my Ressurector cartos, and the cool vapor from my map tank isn't cutting it.

 

[Dieseler]

I am new to the whole vv thing. What volts do I vape with a 2ohm?

I vape with my ego which i believe is around 3.2 -3.4 volts.
I tried with my megalodon which is 3.7 and get a burnt taste if i vape it hard.
I used my vv box and keep it turned down low to avoid burnt taste and the vape was very good at a low voltage.
Higher voltage is good for higher ohms.

 

[StotheK]

I use either the SmokTech or the Big Daddy tanks with my ProVari. Except instead of dual coils, I use the 1.7 ohm Resurrectors from crystalclearvaping.com (also available pre-punched now) and I run those at 3.7 to 3.9v.

 

[***Shannon***]

I vape with my ego which i believe is around 3.2 -3.4 volts.
I tried with my megalodon which is 3.7 and get a burnt taste if i vape it hard.
I used my vv box and keep it turned down low to avoid burnt taste and the vape was very good at a low voltage.
Higher voltage is good for higher ohms.

Ok so what about LR vs SR? How does one figure the voltage? I have alot of LR carto's. I am lost when it comes to the voltage/ohms/LR/SR and all that stuff.

 

[scalewiz]

As stated above, the cartomizer tanks are great for the cartomizer lovers. Just don't let them run dry, since they have a poly filler inside the cartomizer. Like any cartomizer, the filler will burn if allowed to run dry. The cartomizers are more flexible in things such as coil resistance and single or dual coils. Your Provari will allow you to really play around with its variable voltage.

I have been using the Vision Tank for a week now, and really like it. It is pretty sturdy, accepts a standard drip tip, and gives you the CE2 experience in flavor and vapor. These tank have a coil that is rather low in resistance, about 1.9 to 2.2 ohms. They work on your Provari, but due to their design they probably won't like higher voltages, and you will find yourself limiting the voltage down to a more standard 3.7 to 4 volt level. At higher voltages, depending on your juice, they can get to running dry or tasting bad. But of course, you can play.

Enjoy the world of VV and CE2's!

 

[RIMP]

http://www.e-cigarette-forum.com/fo...forum/178535-jonboyusmcs-lava-tanks-4365.html

 

[***Shannon***]

http://www.e-cigarette-forum.com/fo...forum/178535-jonboyusmcs-lava-tanks-4365.html

I just posted on that board asking how I can get one of those