Help with Kbox mini - just got it

[jamesfarrell]

Irritated already, haven't done enough research.

Why does it come with what looks like 2 different coils Is one that you just build yourself? The bigger one? I also notice an oring on the bigger coil thing and also an oring somewhat out of place on the base.

Any ideas?

Should there be an oring on the base as well as the coil tank thing? Don't know the names of this stuff.

 

[erikbal]

The round one with the screw in it is the rebuildable section and the square looking one is a pre made coil. If you remove that screw it comes apart and you'll see what I mean. YouTube Subtank mini rba and you'll learn all you need to know. Also make sure to prime the coils before using. Drip some juice into the cotton inside the coil before installing then once installed let the tank sit a few minutes and take a couple primer puffs ( without hitting the fire button). Also start with the power lower and gradually work your way up to where you like it. Good luck with it and I hope you like it!

Sent from my VS980 4G using Tapatalk

 

[jamesfarrell]

Yeah I took it apart and noticed it had a coil in it. Not getting much of a TH with this thing with either coil. I got some premade ones, 1.2 horizontal coils and some .5 vertical coils.

 

[vapee]

You might find better throat hit wuth the 1.2 ohm coil and reducing the watts and closing off the airflow a bit too, also higher nic and higher pg ratio juices will give a higher throat hit too.

 

[Ohmg like ohmg]

I have this also, I believe you will learn to love it! I normally use an RDA as opposed to the sub tank mini though. I really wish It had an adjustable 510 though or spring loaded 510