Help with tank/mod compatibility PLEASE

Status
Not open for further replies.

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
I would like not to explode. I'm almost completely sure(bought battery from friend) I have an Aspire CF Sub battery which I previously had an iSub tank with. That tank busted and now was just told to buy an eleaf iJust 2 tank and it'd be fine. Please let me know if it'll be fine lol.


I tend to agree , good call on that .
 

Susan~S

ECF Guru
ECF Veteran
Verified Member
Mar 12, 2014
16,937
11,694
68
Mpls/St.Paul, MN
Okay, so with this ELeaf iJust2 tank which I believe is a .3 ohm cool, it'll just be a warm vape?
Many be a VERY warm vape but is safe to use on your CF SubΩ Battery. Here are the product usage details.
  • Press button 5 times in succession in 2 seconds. The LED will blink 3 times (both blue and orange lights) and the button will illuminate Blue when active and ON. Repeat this procedure to turn battery OFF.
  • Press the LED button and inhale at the same time
  • Blue LED light will display for battery cell voltage of 3.5-4.2V. The Orange LED indicates a voltage less than 3.5V.
  • Output Voltage: 4.2V full power output
  • Compatible with: 0.3-1.0 ohm atomizers
  • Maximum current: 40A
 

Robert Cromwell

Moved On
ECF Veteran
Feb 16, 2015
14,009
65,472
elsewhere
I just checked the specs for the Aspire CF sub ohm battery it is good down to .3 ohms. But unless you like a hot vape I would ust at least a .5 coil in the tank you select.
The CF mod comes in 2 versions 1 which takes an 18650 battery and one with a non removeable battery. If you use the one with the removeable battery use a good 18650 battery like a Samsung 25R. And you will need a charger for the 18650 battery as well. If you have the built in battery one it charges thru the 510- with an ego charger. That will take a while....
They have both varieties here with a good deal too. 15.00.
Huge discounts on closeout ECIG supplies.
 
  • Like
Reactions: djsvapour
Status
Not open for further replies.

Users who are viewing this thread