So I got my mini about 2 days ago. I put it all together juiced it up and let the juice soak for about 20 minutes. I fired it up and took a drag and it taste really burndt. I tried everything to fix it. Thought maybe it was the juice; tried three different juices in it. I'm now on my 3rd bvc coil and it's still giving me a burnt taste from the first to last hit on every coil so far. Somebody please help me.
Help with the nautilus mini please!
- Thread starter Drob1298
- Start date
- th_trl_thread_readers 0
- Status
Hello and welcome to the forum Drob1298. Glad to have you here!
Are you priming your coils before you start vaping with a new coil?
The wicking material in these coils needs to be thoroughly saturated before using them, and it takes a while when you first load up a new coil. I like to drip a few drops of juice down into the coil where the mesh screen is then put the coil into the tank and let it sit for ten minutes (with the tank full). Give it a few unpowered primer puffs during these ten minutes. This should make sure you get the wick fully saturated.
Coil Prep for the Aspire Nautilus
Are you priming your coils before you start vaping with a new coil?
The wicking material in these coils needs to be thoroughly saturated before using them, and it takes a while when you first load up a new coil. I like to drip a few drops of juice down into the coil where the mesh screen is then put the coil into the tank and let it sit for ten minutes (with the tank full). Give it a few unpowered primer puffs during these ten minutes. This should make sure you get the wick fully saturated.
Coil Prep for the Aspire Nautilus
My routine hasn't failed me yet.
1) Load it up and let it sit for about 5 minutes.
2) Give the juice a swirl and give the tank a light shake.
3) Give it an unpowered primer puff.
4) Then I repeat, starting at #1.
After 15 minutes (3 reps) I have found it is ready to go.
1) Load it up and let it sit for about 5 minutes.
2) Give the juice a swirl and give the tank a light shake.
3) Give it an unpowered primer puff.
4) Then I repeat, starting at #1.
After 15 minutes (3 reps) I have found it is ready to go.
Same thing here. Also, after 2 days with the nautilus mini I've switched back to my mini ProTank 3 because the Nautilus is ripping my throat up. I love the flavor and everything about it. Thinking of going from 12mg down to 6mg in the Nautilus to see if that helps. The first day I went through 2 coils also. I primed them and dripped juice on the coil. I almost gave up and the 3rd coil worked fine. I use it on a MVP 2.0 set around 4.5V.
I prefer the flavor from the Nautilus but love the way the mini ProTank 3 hits at 3.8V. I use the 1.5 dual coil in it. If the Nautilus doesn't work for you I'd give the mini ProTank 3 a shot.
Also with a new coil start at a low power for a good 20puffs, then move up about 1w and repeat till you hit your sweet spot
If chain vaping or doing big lung hits on the Nautilus mini I highly recommend giving the juice a swirl and the tank a little shake between puffs.
What you may find (like I did) that a little air bubble will float out of one of the wick ports.
If you get too much air in the wick area you'll get bad hits.
- Status
Similar threads
