Help

[Juggernaut666]

I've got a Tesla vv/vw with a nautilus sitting on top. Been having issues lately with vapor production. It's sitting at 1.9 ohms, I'm running it at 3.7 volts and 7.0 watts. I get little to no vapor, brand new coil as well. If I try running the wattage any higher it spits ejuice into my mouth, hot ejuice.

Am I misunderstanding and setting it wrong?

 

[r77r7r]

Adjust airflow holes??

 

[Rourke]

Maybe make sure the coil is tightened down good.

 

[Juggernaut666]

Both are good, got it on the largest hole for air flow, coil is in there good. Was working great, not sure what changed. Very weird.

 

[r77r7r]

Clean airholes, and sometimes have to clean coils daily.

 

[Jake67]

That's pretty low for a nautilus. You can't run at volts and watts at the same time. Whichever you set last will determine how much power you are sending to the coils.
I would raise it to 4.3 volts or 10.5 watts. Do this in increments so you don't burn the coil.


Sent from my iPhone

 

[Juggernaut666]

Not sure I understand, still wrapping my brain around the vv/vw thing and how they relate, and which effects what. Any chance you could link me to a more thorough explanation on how to set these work or if you don't mind doing it? Would like to upgrade to a provari one day, but would like to understand how these settings effect one another. I'd really appreciate it.

I get mechs, but these escape me.

 

[eyerhere]

If you set your volts it will fire at that voltage regarless of the ohms in the coil as long as thy are within allowed range.
If you set watts the mod will fire at whatever voltage is required to achive that watt level as long as it is within the alloew range.