Help

[Gabriel José]

I have a vaporesso luxe, I bought it 2 months ago and I didn't have to change the tank, I decided to change it now. Top Lid spins, but doesn't come out, someone to tell me how can I get it out?

 

[Daniel Forsyth]

Welcome to ECF
I'm not familiar with the Vaporesso Luxe kit but there will be someone able to help with your problem

 

[Katya]

I have a vaporesso luxe,

Hi Gabriel. You didn't tell us which tank you have. May I suggest that you find the exact model of the tank and try to find a YouTube video review. Some of those new tanks have tricky new child-proof top caps--maybe that's your problem.

 

[Richard Winter]

The top section of the tank may well spin. You will need to grip the bottom of the tank, the airflow section and turn anti clockwise. That way the whole tank should undo from the 510 connection on the mod.

 

[Katya]

anti clockwise

You mean counterclockwise, right?

Two nations divided by a common language.

 

[Gabriel José]

Hi Gabriel. You didn't tell us which tank you have. May I suggest that you find the exact model of the tank and try to find a YouTube video review. Some of those new tanks have tricky new child-proof top caps--maybe that's your problem.

I have a skrr tank, I looked for videos, but unfortunately I didn't find anything talking about

 

[Gabriel José]

The top section of the tank may well spin. You will need to grip the bottom of the tank, the airflow section and turn anti clockwise. That way the whole tank should undo from the 510 connection on the mod.

I'm holding the tank and rotating the part where the e-liquid is placed, they rotate, but they don't separate (Sorry for the english, I’m using the translate )

 

[Richard Winter]

You mean counterclockwise, right?

Two nations divided by a common language.

Opppppsssssss. Yes counterclockwise and if that doesnt work anti clockwise lol

 

[Gabriel José]

.

 

[Richard Winter]

Are you trying to take the tank off the mod or trying to take the tank apart?

 

[Katya]

I have a skrr tank, I looked for videos, but unfortunately I didn't find anything talking about

Look here--2:21.



There's more:

https://www.youtube.com/results?search_query=vaporesso+skrr-s+tank+review

 

[Richard Winter]

I see from your photo. I dont have that specific tank but I'm guessing that if the top section is not a screw fit onto the glass, then it will be a push fit. Its held together by the bottom airflow section.
As you've taking that bit off you should be able to pull the top fill section off the glass. It will be tight because of the o ring seal.

 

[Gabriel José]

Look here--2:21.



There's more:

https://www.youtube.com/results?search_query=vaporesso+skrr-s+tank+review

I see from your photo. I dont have that specific tank but I'm guessing that if the top section is not a screw fit onto the glass, then it will be a push fit. Its held together by the bottom airflow section.
As you've taking that bit off you should be able to pull the top fill section off the glass. It will be tight because of the o ring seal.

problem solved, thanks for the help with this simple problem. Closed by pressure, I managed to pull it on one side, allowing air to enter

 

[Gabriel José]

sorry for the english, i'm using the translator. And thank you again for your help

 

[Richard Winter]

sorry for the english, i'm using the translator. And thank you again for your help

Thank you, I understood the translator.
Pull the glass section away from the metal fill top.
Hope that works for you.

 

[Richard Winter]

apparently it is due to pressure, and there is a plastic ring between the tank and the top lid, but I have already made a huge push by pushing from the bottom up ... I will insist on pulling, everything indicates to be the way of withdrawal, thanks for the help folks

Yes, pull the glass away from the top fill metal bit. It will be tight because of the rubber seal. Good luck.

 

[Katya]

apparently it is due to pressure, and there is a plastic ring between the tank and the top lid, but I have already made a huge push by pushing from the bottom up ... I will insist on pulling, everything indicates to be the way of withdrawal, thanks for the help folks

That o-ring looks big. Try applying a little vegetable glycerin or eliquid to lubricate it. You should always lubricate your o-rings after you buy a new tank and wash it. It keeps them happy and cooperative.

Good luck!

 

[Gabriel José]

Thank you, I understood the translator.
Pull the glass section away from the metal fill top.
Hope that works for you.

Yes, pull the glass away from the top fill metal bit. It will be tight because of the rubber seal. Good luck.

That o-ring looks big. Try applying a little vegetable glycerin or eliquid to lubricate it. You should always lubricate your o-rings after you buy a new tank and wash it. It keeps them happy and cooperative.

Good luck!

I did it, making a great force on one of the sides, managing to get air in. thanks again for the help with this simple problem

 

[Richard Winter]

I did it, making a great force on one of the sides, managing to get air in. thanks again for the help with this simple problem

Well done, glad you done it Gabriel.

 

[Katya]

I did it, making a great force on one of the sides, managing to get air in.

Whew! Congratulations. Now I can finally go to bed. The suspense was killing me.

thanks again for the help with this simple problem

De nada! That's what we're here for!