- Status
In the facebook vid I believe she says 'brass' piece this and that so is this all plated brass then?
If so are there plans for a ss or titanium (or whatever) version?
Not the biggest fan of plated brass parts here
But otherwise this looks pretty darn nifty and I think I may just have to have one. I passed on the baby bottle pro tanks but this looks sharp. How about asking them to also make a version with a flat bevel top (maybe sold separately as an option) kind of like say the nova tank top cap ?
If so are there plans for a ss or titanium (or whatever) version?
Not the biggest fan of plated brass parts here
But otherwise this looks pretty darn nifty and I think I may just have to have one. I passed on the baby bottle pro tanks
but this looks sharp. How about asking them to also make a version with a flat bevel top (maybe sold separately as an option) kind of like say the nova tank top cap ?
In the facebook vid I believe she says 'brass' piece this and that so is this all plated brass then?
If so are there plans for a ss or titanium (or whatever) version?
Not the biggest fan of plated brass parts here
But otherwise this looks pretty darn nifty and I think I may just have to have one. I passed on the baby bottle pro tanks
I'm right there with you on have one SS, passed on the bottle look myself but liking this look a lot. I'll just keep a
n eye on the plating till if and when SS parts are made.
Last edited:
Yup. Took a risk and ordered one. SS would be nicer but prolly heavy. Though I am not sure it would be much heavier than it will already be. Titanium is an interesting lightweight thought but prolly way expensive...
I caught the brass part too. I think I'm going to pass unless it comes out in SS or TA.
Still waiting on replacement glass to be available lol. Using a protank to hold me over til they come out.
Hmmmm....not that many left in stock....if you wait to order until the extra glass tubes get here........
Hmmmm....not that many left in stock....if you wait to order until the extra glass tubes get here........
I got my davide the day they were released from anyvape. Broke the glass coming back from mov, now using protank til they release the glass.
Just got mine today... I actually forgot I ordered it! So far, I like it... the coil that came installed read 3.2 ohms when I first put it on my Tesla, but after I filled it, it ramped back down to 2.2. On the stock head, so far performance is very similar to the Protank... I like my draw a little airy. Filling is a little more finicky than the Protank, but not really difficult. It fills just fine with a standard squeeze bottle, you just have to take care not to drip down the air tube. I also got in 6 feet of ekowool 2mm, and 50 feet of Kanthal, so I'm going to recoil a few Protank and evod heads soon and see if I can get this puppy really rocking! If we can get 5ml tubes for this, it will definitely be close to my perfect clearo!
Got mine in today too. Not too shabby - though I figured it would be a bit bigger... Its raven nest tank size when I was thinking it was more like aga size. Also its much lighter than I would have thought. I don't have a protank but a friend showed me one and seems to me the protank was much heavier than this is. Installed head comes out at 2.1ohm. The included drip tip has 2 smaller than normal orings (instead of one bigger one) and seems a bit loose. Also the threads on one end of the center tube are a hair crooked causing one of the caps to lean just a hair. After reassembling several times I was able to get the crooked thread to the top cap and it is almost unnoticeable unless you roll the tank on the table (and are ocd about those things like I tend to be lol)
Looks good on the cvi and sigelei zmax mini and not too bad on the round robust either. Might be a tiny bit more airy than some things but bad. Hard to tell - seems about the same as everything else I have going though (ravens nest, t3s, and a mosnter carto tank)
Running 4v @ 2.1 ohm and like everything else it needs breaking in and I've only been through 1/4 a tank or less and vapor is picking up nicely.
Overall a pretty nice little tank
I'll prolly end up getting the extended tubes for it too when they come out.
Looks good on the cvi and sigelei zmax mini and not too bad on the round robust either. Might be a tiny bit more airy than some things but bad. Hard to tell - seems about the same as everything else I have going though (ravens nest, t3s, and a mosnter carto tank)
Running 4v @ 2.1 ohm and like everything else it needs breaking in and I've only been through 1/4 a tank or less and vapor is picking up nicely.
Overall a pretty nice little tank
I'll prolly end up getting the extended tubes for it too when they come out.
*kicks dirt* the pro tankers get all the fun.
Pro Tank I & II PLUS Davide Replacement Bases - Newer Version [gv-ProTankReplacementBase-Newer] - $2.45 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more a little help
I put the pro head in this pro base throw my Davide on top. Now the tank on my mod and the air flow is locked out. Put the head back on the Davide stock bottom and I have my air flow back. I can see why this is happening?
I put the pro head in this pro base throw my Davide on top. Now the tank on my mod and the air flow is locked out. Put the head back on the Davide stock bottom and I have my air flow back. I can see why this is happening?
This could be how the base and your PV are with each other... in otherwords, it may be that the base is just unable to breath on the PV itself.
A test you can try... draw on the Davide with the base that is giving you trouble but not when it is on the battery/PV... if you get a draw, then the base and your PV themselves aren't liking each other. Another direction is to try the base on a ProTank to see if it works then or not.
Did that mouth full of juice, best I can think of air is only going through the center pin and not the 3 lil side holes I wanted so. All PV's work with one bottom not with the pro .....
OK I have my solve the vision victory BCC head works in a Davide but not in a protank
My error way an assuming I was using a pro head I was not...
Crushed Carmel Apple tastes better when used correctly.
Last edited:
Did that mouth full of juice, best I can think of air is only going through the center pin and not the 3 lil side holes I wanted so. All PV's work with one bottom not with the pro .....
OK I have my solve the vision victory BCC head works in a Davide but not in a protank
My error way an assuming I was using a pro head I was not...
Crushed Carmel Apple tastes better when used correctly.
With so many JDS's ( juice delivery systems for those that don't know ) that are using similar coil/heads... I now keep mine in the box they came in so I don't mix them up... Of course that means buying a box at a time but I do that anyway.
Had to share My Davide Equiped with a ravens nest Drip tip, nice and flush.....
Any estimate for when these will be back in stock? I need to place an order, but I have to wait for my Dwolla funds to be available since my card was compromised and I had to cancel it today. I need to know if I need to hold off for a day or two after it is funded to place my order.
and I had to cancel it today. I need to know if I need to hold off for a day or two after it is funded to place my order.
Any estimate for when these will be back in stock? I need to place an order, but I have to wait for my Dwolla funds to be available since my card was compromised
Found them in gold,
Last edited by a moderator:
- Status
Similar threads
- Locked
- Locked
- Locked
