Here Now - Kanger T3S BCC Complete Units, Tube, Base, Coil - More Economical To Change Heads

[dannoman]

Kanger T3S eGo Clearo Bottom Coil 3.0ml Repl Coil - 1.8ohm
$6.75

This is the upgrade version of the ever popular Kanger T3 - the Kanger T3S Modular Design. This is the complete unit with tube, base and coil. Bases and coils are available for separate purchase. The T3S is different in that it has a two-piece base - the metal base itself with knurled texture and the coil unit itself. This allows for cheaper upkeep and replacement of the coils. Of course the Kanger T3S is a BCC - Bottom Coil Clearomizer. Gradations are marked on the side and go to 3.0ml. They are backwards on one side so that you can see the fill marks easily when refilling.

Extremely easy to fill, you simply unscrew the base, invert the clearo and fill straight out of your juice bottle. Keeping the unit inverted you then screw in your stem coil base.

The Kanger T3S has a new improved mouthpiece also that is an acrylic translucent material and is very comfortable on the mouth. This is a fixed piece and cannot be removed. This is to ensure that the unit DOES NOT leak when inverting to fill.

What You Receive With Your Purchase:

• One CLEAR Kanger T3S tank assembly with a 1.8ohm Coil/Wick head, metal base receptacle for the screw-in coil head and of course, the tube itself.
• Additional coil head base assemblies are available elsewhere in this category.
• Length is 80mm compared to 73mm for the Kanger T2 Top Coils
• Please Note: The mouthpiece on this unit cannot be removed!
• This has eGo threading meaning you must use it on an eGo or use a 510 to eGo adpater (available in our Atomizer and Accessories category) in order to use this unit.

Kanger T3S & MT3S : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[badkolo]

nice, finally they are in

 

[AG51]

Thanks guys

 

[dannoman]

We have blue, green and yellow also incoming...

 

[ingerri]

just ordered mine got red and purple cant wait to try them

 

[dodari]

Question.

On these T3s will the coil/wick replacement units for the Evods/Protanks work on these T3s's?

Thanks.

 

[rdsok]

Question.

On these T3s will the coil/wick replacement units for the Evods/Protanks work on these T3s's?

Thanks.

That is what they say... The ProTank coils are the closest looking ones but I haven't compared them side by side.

 

[dodari]

That is what they say... The ProTank coils are the closest looking ones but I haven't compared them side by side.

Thanks for response.

I hope it reveals that they are compatible, I like the capacity better, 3 ml. I think I saw? .. I like the evods and 2 Protanks but when my old T3s were working I liked them pretty well.

My mains now are an American made BF and its closely related bf atty which work well, BUT the new T3s's would have an advantage when going out on sites for to work accident analysis and other Civil engineering field work, like climbing around old bridges, culverts and such.

Hope the compatibility thing works out, I have a boodle of evod guts which I've learned to rebuild.

 

[IMFire3605]

No, the Protank/Evod heads can't fit in the T3 tank, the flange under the wick of the head is wider than the T3s head. They screw down on the T3s base, just the base doesn't fit in fully down with these heads in them. So my suggestion is get spare T3s heads, which I am doing then rebuild them. Upgrading all my older T3 tanks to T3s, as I have been rebuilding them, the removable head makes it easier to cut off the excess wire legs of the neg and pos compared to the standard T3 it is hard to get even small flush cutters down in the cup and get majority of the excess. Beside that the T3s/MT3s performs just as competently as the standard T3/MT3.