So Fright, I know you don't use 510s (which is sad, I would've loved your opinion on this), but I wanted to see if anybody has used the .357s in an AVS.
Thoughts? Experience?
Thoughts? Experience?
- Status
I love 510 stuff just never really got into dripping so before my AVS I never had a real use for atomizers. I've got a lot of stuff coming up in Sept so I have to put experimenting on hold and use what I have untill Oct but I might have to give the HH.357 a try I've read a lot of good stuff about them.
I recommended 901 stuff for the AVS because that was what seemed to be the consensus as the best to use in them.
I recommended 901 stuff for the AVS because that was what seemed to be the consensus as the best to use in them.
I will try and get a couple of 901's to use! I have never had anything 901, so it will be a new experience for me!
It was the same here. I would recommend trying a boge 510 carto mine is working like a champ although I had to cut it down with a pipe cutter by about 1/3 of an inch.
I gotta be honest, I thought it a lot easier to use punched 808 cartos in the AVS........
You do not get the flooding with the punched 808 Carto like you do with the 901. A punched 808 at 6v in the AVS is silky flavorful heaven.
I was hoping that is the reason. I have some 808 cartos I am waiting on a punch for. The 510 cartos have the same advantage.
Damned straight, load and set the air ring and don't screw with until reloading!!!
Dude!!! I used a simple jig I set up.
1. Drill a pilot hole in a board about 1/4" from end.
2. Insert a narrow finishing nail.
3. Put stainless carto in vise with punched end towards outside.
4. Align board with carto end.
5. Tack hammer small hole -- obviously the nail has to reach!
6. (optional) Turn over and repeat for heavy VG juices.
7. Insert in AVS and fill.
8. Use drip tip to juice up carto (don't pull too hard!!!
).9. Fill tank to about 1/2 cm from top and fully assemble.
10. Voila!!!!
I'll try that thanks Ripp. For some reason I was envisioning a board with a nail and spring and all kinds of stuff this is much simpler lol.
Right now Im using a HH357 on my AVS and it work perfect on it. I have not tried on my UFS yet but it will be next. I have the AVS and my iAtty fully loaded with all my batts fully charged waiting for Irene here in PR. We are under hurricane warning and the heavy rain and winds has started to affect the island. So my vaping is covered at least.
I just got a couple of hh.357's and am running one now in my UFS and it's awesome, 3.7v vaping has never been this good, talk about awesome flavor, throat hit and tons of vapor.
Here's an easy jigg you can make for punching cartos using several pieces of tubing and an atomizer connector. Screw the carto into a atomizer connector inside the brass tube. The slot marks where you want the hole to be. Using a hardened and polished steel punch....one whack and you've got a smooth hole.
Same hole, same size, same place on every carto.
Same hole, same size, same place on every carto.
Para does our lifes easy. Not only he founds very nice and easy ways to do things but also inexpensive ones. THANKS Para, I love you buddy
- Status
Similar threads
