-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-
- Thread starter JmanEspresso
- Start date
- th_trl_thread_readers 0
- Status
I love that setup, I have been so close to pulling the trigger on that XXIX mod, how do you like it? BTW, where did you get the Copper Lunar drip tip?
I got the copper one at Vaping Craze. The SS and brass at VI. I polished the cu dt a bit to make it matched with the mod.
I love it so far for single coil set up. Hit hard and good flavor. The only thing i have little problem the top cap is hard to remove. So tight
Last edited:
Okay guys, it's "created", but I guess it has to be approved by big brother first. I don't think I can link to it yet. Hopefully this won't be an issue though, as there are tons of groups made, and ours has a legit purpose - plus sonicdsl told me we should go this route. Might be a day or so wait though, hopefully not too much longer.
If anyone doesn't know, these are essentially run as a subforum by whoever creates it and the moderator team. Having said that, all I want is a place where we can make multiple threads on what we wanna talk about without the topic getting lost in a sea of clone threads. I kinda think this should be a group effort in carving our own initial little space, as far as if we need to come up with rules, etc. I don't think it will be an issue with the initial members I think, but thinking ahead, if it ever starts to grow (I know there are a lot of high end/authentic mod enthusiasts on ECF that don't post in this subforum), we may need to take measures to protect our little space (whether that be rules, making it private/invite-only, etc.).
I will update when it is approved and open
If anyone doesn't know, these are essentially run as a subforum by whoever creates it and the moderator team. Having said that, all I want is a place where we can make multiple threads on what we wanna talk about without the topic getting lost in a sea of clone threads. I kinda think this should be a group effort in carving our own initial little space, as far as if we need to come up with rules, etc. I don't think it will be an issue with the initial members I think, but thinking ahead, if it ever starts to grow (I know there are a lot of high end/authentic mod enthusiasts on ECF that don't post in this subforum), we may need to take measures to protect our little space (whether that be rules, making it private/invite-only, etc.).
I will update when it is approved and open
I support you Iceman. I will miss some of my clone Tobh sleeves i like although those are not release on the market yet. I love dripping and very picky to get RDAs i like. I currently have few Authentic RDAs. Nimbus V3, Nimbus V4, SS Patriot, 2 SS Tobh Atty and the two Quasar i just get CU and BD. I will respect your ideas to keep ONLY Authentic Thread if you give a chance to join and I still post my clone Tobh sleeves on other threads. It wont hurt nobody 
Last edited:
I support you Iceman. I will miss some of my clone Tobh sleeves i like although those are not release on the market yet. I love dripping and very picky to get RDAs i like. I currently have few Authentic RDAs. Nimbus V3, Nimbus V4, SS Patriot, 2 SS Tobh Atty and the two Quasar i just get CU and BD. I will respect your ideas to keep ONLY Authentic Thread if you give a chance to join and I still post my clone Tobh sleeves on other threads. It wont hurt nobody
Yeah man, at least initially and probably forever, the group will be open to whoever wants to come in, though anything having to do with clones would be deleted at the very least. But as far as what you post outside of the group, I don't think that should have any bearing on what goes on within the group.
Well, it's only been about 9 hours, but so far I like everything about it. The double adjustment under the topcap (for atty 510 and battery contact) is a little picky, if you want that invisible seam, but I set it and forgot it, didn't mess with it when I changed batteries, and it's still in perfect position.
The button is lite-touch, but not feather-touch, nice and simple. It has that "I will never F up on you or get wonkey, ever" kinda feeling.
All-in-all very satisfied.
Oh yeah: and effortless clouds for days.
These Sony 26650VTs are comically big though lol. Tonight I may do a build on the omega that actually employs those 50amps
These Sony 26650VTs are comically big though lol. Tonight I may do a build on the omega that actually employs those 50amps
Last edited:
Dude I will give you a standing ovation if you can build that low on the Omega, wrapping wire around posts below 26ag is such a pita.
Hmmm. I myself having hard time to figure out my 2 VW Nemy and SS Tobh Atty real or clone if i dont marked them seperately. Base on what you think they are clones? For me honesty is best policy. Just an opinion Iceman. I know its very hard. Hope you are successful.
Thank you, where do you go to get something bronzed?
this is where i learned to do it.... DIY:Torch Your Stainless Steel Atomizer Cap Bronze or Blue Color - YouTube
the trick is to get the color just turning gold and stop. if you go longer it comes out really dark. the cool thing is if you mess it up you can remove most if not all the color with some industrial scotch brite. course then you loose logo's if they are not etched very deeply.
try it on something cheap first. i love it against the copper. Good Luck.
this is where i learned to do it.... DIY:Torch Your Stainless Steel Atomizer Cap Bronze or Blue Color - YouTube
the trick is to get the color just turning gold and stop. if you go longer it comes out really dark. the cool thing is if you mess it up you can remove most if not all the color with some industrial scotch brite. course then you loose logo's if they are not etched very deeply.
try it on something cheap first. i love it against the copper. Good Luck.
Hi, sedge! I 'member you - trippy tips ago....
I've never owned or purchased a clone & while one should never say never.... I can't imagine I ever would....
And, icemanistheking, I'd be thrilled and honored to be a part of this new group....
I've never owned or purchased a clone & while one should never say never.... I can't imagine I ever would....
And, icemanistheking, I'd be thrilled and honored to be a part of this new group....
I dont post much on this forum, maybe once every few days, i mostly read and learn but this has become one of the few threads i actually enjoy. I recently bought a kalafan nemesis but before i did i thought id check ecf for reviews and, as many have stated in this thread, most mentions of the nemesis here are about the clone. I appreciate you guys for keepin it original and while i cant say id be a very active member of said group id love to follow the threads so i can continue lookimg at and learning about all your shiney mechs and get ideas on building my collection further
- Status
Similar threads
- Locked
