Nanos Thror /TNS 510, TNS hybrid/Poldy tube with Nanos button and Poldid for size comparing, all in 18650!
Sorry for the poor photo quality, using phone camera
-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-
- Thread starter JmanEspresso
- Start date
- th_trl_thread_readers 0
- Status
Nanos Thror /TNS 510, TNS hybrid/Poldy tube with Nanos button and Poldid for size comparing, all in 18650!
Sorry for the poor photo quality, using phone camera
Their mods are very well made. I have a roller. However, all that said I'm a bigger fan of GP mods and they hit harder.
Stainless is cool, and sleek, and has its place and function, but a good copper mod hits harder, and is like a living, evolving thing. I really like the feel of brass too.
I think they're all cool. My next high-end mod will likely be stainless or some other hard metal though, I think. I need something sleek and indestructible for out-and-about
Flavor is firstly for me. I'm 49. My lungs can't take true cloud chasing but I do like thick vapor with the right amount of moisture. I can't take too hot so the righr amount of air flow is important. It seems my target resistance is 0.35 to 0.4.
I haven't had the Quasar long enough to really compare but they are the top two of these 5 for me. I have had the Jam for over a month. I really like the screw off lid on the Jam. The chamber sizes are similar but the Quasar reduces.
One note on the APO...my standard coil wrap that comes out the same (within a couple 100th ohm) on all my 3-post atties always comes out almost a tenth of an ohm less on the APO.
Last edited:
Thanks, friend. I'm getting a second Paps X anyway. Loved the looks of the Atmizoo, though. Very classy.
The new Lab and Guppy supposedly hit pretty good I've been eyeing the Lab for quite some time. Always wanted to try a side button mod and the Atmizoo Lab looks really clean with the unibody tube.
Sent from my HTC One_M8 using Tapatalk
I have only one side button Mech, its the Golden Greek Just GG.
far as looks go, I love it.
I DO think in its stock form with the whole collector tank thing, if you're not using one of thier atomizers in hybrid mode, that the whole thing is a little more complicated than need be. Im trying to get a stealth cap for 510 attys.
But complicated doesn't mean disfunctional. Not at all. Its designed with a purpose, and it performs that purpose as it should. The overall craftsmanship of the device is equal to the best of them, Im glad I was able to get my hands on one. Ive been on the notify-me list at EsmokeGuru since an hour after I bought my first one, and its been a few months since Ive gotten a notice they're in stock again. Apparently these are quite hard to get brand new.
Worth the time, effort and money though, Id say.
far as looks go, I love it.
I DO think in its stock form with the whole collector tank thing, if you're not using one of thier atomizers in hybrid mode, that the whole thing is a little more complicated than need be. Im trying to get a stealth cap for 510 attys.
But complicated doesn't mean disfunctional. Not at all. Its designed with a purpose, and it performs that purpose as it should. The overall craftsmanship of the device is equal to the best of them, Im glad I was able to get my hands on one. Ive been on the notify-me list at EsmokeGuru since an hour after I bought my first one, and its been a few months since Ive gotten a notice they're in stock again. Apparently these are quite hard to get brand new.
Worth the time, effort and money though, Id say.
I've had a couple of GG's and I can appreciate the work that goes into them. It's just they are around the same amount of money as the Swan and Lycan I purchased. They just aren't as good in my opinion. Plus, you pretty much need a stealth cap which is some extra money.
Hanging out at my local B&M. Had to get this Tempest Depayens. Awesome mod. Rhodium plated contacts. It hits harder than my Cartel.
I've been wondering, does rhodium plating make a diffrence to conductivity? And plated over copper?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I would say so. I think that may be the reason it hits so nice.
Last edited:
Thanks. Here's a pic of the copper Taurus for comparison. Notice the stainless steel seam on the Taurus.
Taurus
No seam.
Projectile
Sedge, you have inspired me:
Rhodium plated copper will hit like copper. It's less conductive than copper but the coating is thin enough to not have an effect in that way. The effect it does have is being non reactive, you get a clean contact hit every time.
Sent from my HTC6435LVW using Tapatalk
Sent from my HTC6435LVW using Tapatalk
I would think rhodium or silver plated would have a slight voltage drop but for lazy people like me it's worth it to not have to constantly use a tarish cleaner on a direct copper connection.
Bill, I see you still have your ink printed Quasar logo. Mine came off in the first U/Sonic bath.
Is that an ohman dt or another Detouche?
Far as Im aware, Rhodium is used not because its superior than other metals, but because its more durable. Same as how silver plate contacts need very little maintainence, Rhodium needs little to none.
Ive got mods with pure copper contacts. They hit the hardest....
...on cleaning day.
Ive got mods with pure copper contacts. They hit the hardest....
...on cleaning day.
Lol yup. I need to clean my Gpins tonight , not really looking forward to scrubbing all the crap off those tiny pieces of brass. I should really try to get some silver ones.
I hear that. This past Vapourday I ordered Lux Gpins for both of my X top caps, and another one for the Heron. Glad the X already comes with the silver plated switch screw, because it seemed everyone was snatching them up for their v3 switches.
- Status
Similar threads
- Locked
