-High-End Mechanicals and Atomizers-Pictures & Discussion Round 2-

[StrikeIII]

I don't have a large collection but fwiw, I'm also enjoying the Odin. thanks to Strike for the recommendation.

I think it was Idabrah asking for pics of the 510?

Nice cliffy! You might want to try to have the coils lined up right in front of the openings. It will definitely make a difference.

Sent from my LG G3 using Tapatalk Pro

 

[cliffy15]

Real nice, Cliffy. Whats the ohms on that build in the last pic?

Not very low at .7 ohm. dual 28ga. 6/7 wraps around a 2.4mm screwdriver. Great flavor with an extra kick in flavor/vapor from my standard single-coil build. I'm enjoying it though I think I might need to drop my nic level if I'm going to vape regularly on this...

I made the coil sit just below the level of the airflow slots on this build I usually have them a bit higher.

 

[cliffy15]

Nice cliffy! You might want to try to have the coils lined up right in front of the openings. It will definitely make a difference.

Sent from my LG G3 using Tapatalk Pro

Thanks for the tip! I normally have them sitting a bit higher and closer to the slots, but I was trying something a little different as far as positioning with this one. =)

 

[evgeny131]

thanks bill....
its a kayfun lite v2 +, with an orion flat cap and a frosted m-tank....
lol....trial and error....

 

[JohnnyEars]

Pandora Shadow/Satmod mini 18500

 

[mssam]

Nice cliffy! You might want to try to have the coils lined up right in front of the openings. It will definitely make a difference.

Sent from my LG G3 using Tapatalk Pro

hummm...you mean like this?

 

[jpcwon]

MCR 101 w/Patriot....vaping some Gambit by 5-Pawns.....

View attachment 354492

 

[Herfalerf]

Not very low at .7 ohm. dual 28ga. 6/7 wraps around a 2.4mm screwdriver. Great flavor with an extra kick in flavor/vapor from my standard single-coil build. I'm enjoying it though I think I might need to drop my nic level if I'm going to vape regularly on this...

I made the coil sit just below the level of the airflow slots on this build I usually have them a bit higher.

If you move the coils more in line with the air holes the throat hit should calm down a bit. What nic are you vaping?

 

[VapinBill]

MCR 101 w/Patriot....vaping some Gambit by 5-Pawns.....

View attachment 354492

Vaping like a Boss, JP.

 

[jpcwon]

Vaping like a Boss, JP.

Hehe, yep!

I like the MCR 101 more and more every day (not that I didn't to begin with!).....The quality of the mod is second to none, and their customer service is excellent (kind of like GP in that regard)....I emailed Liam from MCR recently and told him I stripped the insulator threads in my Hybrid adapter. So what did he do? He sent me TWO new insulators for my Hybrid adapter, and Two new switch insulators....No Charge!!

 

[Vapourz_411]

Put together some of my dripper/mod combinations last night...while taking the picture my wife walked in, looked at me hovering over the mods with my iphone camera, shook her head and said "I just don't get it". How do you explain how much fun this all is to someone who doesn't get it? Maybe the answer is...you don't need to explain...different strokes for different folks

 

[jpcwon]

Vapemail today (the Tobh)!! Very excited to put a build in it!!

View attachment 354564

 

[cliffy15]

If you move the coils more in line with the air holes the throat hit should calm down a bit. What nic are you vaping?

I normally vape at 8mg on a 1.3 ohm single coil. Not a clean build pic but this one is running with 6mg of eliq cube pink starburst. I need to get something a bit lower.All this chain vaping is giving me a nic headache!

 

[Tinkiegrrl]

Here's my only high end mech mod. Just arrived today. Topped off with the Erlkonigin.



Some close ups of the engraving and the switch. The switch is a dream, by the way. The throw is very short and only takes a slight press. The locking mechanism is great. Slight turn and you hear a click. That's how you know it's locked. Button is recessed, so I can put it down without locking it on a table and it won't fire.

 

[BTerry]

View attachment 354587

View attachment 354588[/QUOTE]

Pokemon!!?!

 

[Grrrr]

Instagram style handcheck pic

 

[Vapourz_411]

Vape mail again today...Celtic Mods SS SloJo with copper top cap and switch, floating center pin and Silver plated-copper contacts, very solid mod for anyone who's thinking about making a purchase. I still need to clean it but here are a few pics

 

[Idaholandho]

I dont know what the context was for pics of the 510, but if you are wondering if the positive post sticks out of the bottom (for use with hybrid style mods like the 4nine and the xxix) then yes it does. Craig is a huge BCV fan and both the Omega and Odin were designed to work with them.

Thanks, I am waiting for mine to convert to a bottom feeder for my REO's and was curious. It will be a snap based on the pin. Thank you again.

 

[mssam]

does any one have a pic of their origen v2 coils? I'm trying to figure out how i want to place the coils on this thing. This thing has a tight working space...

 

[jpcwon]

does any one have a pic of their origen v2 coils? I'm trying to figure out how i want to place the coils on this thing. This thing has a tight working space...

I don't know if this'll help you or not, but here's how I'm running my 2 Origen V1's (similar build deck).....Dual 28ga vertical micro coils....about .65 Ohms IIRC....Wicked with KGD...

View attachment 354665