High End REGULATED MODS !

[FearTX]

what atty is that on the pipe ? im looking for a pipe setup for my dad and that looks pretty slick. also would a kanger fit on one of those pipes ar do you recommend any other easy to use setups?

The atty is a Viking V2 from Fight Club mods. Can be found at Mod N World Online Vaping Store It is very leak resistant in that the air tubes stick up a bit you can tip it or lay it on it's side it will not leak. Turn it upside down and it will leak. There are others like it, I have owned them all, that is the best to date. More build options and airflow is not always better, but in this case it is. It also has an extension that you can buy for it to make it into a "fluffed" atty. Dunno if I will get, maybe.
Atties for pipes, any leak resistant rda (not many out there) Virtually any tanked atty. That pipe has only 510 but there are ego adapters as well as pipes that come with ego and 510 threading.
There is a whole nother world of epipes, google is your friend.

Edit: Gennies are generally no bueno for pipes, most of them leak when tilted, there are a few leak proof ones. Dudenberg V3 is my fave for that purpose

 

[Fox5]

Thanks for the info mate. Now the prob is acquiring a ftm with a DNA 40, the hunt begins

 

[FearTX]

Thanks for the info mate. Now the prob is acquiring a ftm with a DNA 40, the hunt begins

SIGH, FTM is easy to get, pay attention to the website, list is usually posted via social media or on the epipe forum. Pay half down, wait a month, month and a half, pay remainder, get FTM.
The other way is to pay attention to the site and epipe forum at the tail end of the list. There will be a few people that do not pay for their remainder at the end of the run and the pipes are sold off. Or buy one used, that there is FTM#3 for me, I JUST sold my first one. Not getting rid of this or the DNA40 Oompaul

 

[FearTX]

Thanks for the info mate. Now the prob is acquiring a ftm with a DNA 40, the hunt begins

List is open, takes a few days to fill up.

Freight Train Mods - Home

 

[qorax]

Dutch Big Brother enforces E-Cig Regulations

Starting February 2015:

~Maximum liquid bottle size permissible: 10ml
~Maximum tank size: 2ml (and must be unbreakable and can be refilled without spilling liquid)
~Maximum nicotine content: 20mg/ml​

Read here the regulation/s, which has been passed in The Netherlands on Nov-24, 2014:
https://translate.google.ca/transla...ingen.nl/stb-2014-456.html&edit-text=&act=url

*It is expected the above law shall go EU wide by circa 2016.

 

[SoonerChris]

Not mine but in the pipeline for Team Hurakan

#hurakansx

 

[Dobo]

My go-to setup.

PhenomenoN Zest on VS rDNA40 by daviddobo, on Flickr

PhenomenoN Zest on VS rDNA40 by daviddobo, on Flickr

 

[qorax]

Apollo Temperature Protected

Build pictures, description and thoughts here (post #50): http://www.e-cigarette-forum.com/forum/rda/630829-apollo-rda-pictorial-5.html#post15427894

 

[jaxgator]

Really digging this Flash-e-Vapor V3.

 

[Dobo]

Got myself a clear tank piece for the Zest, looks great!

PhenomenoN Zest with clear tank section by daviddobo, on Flickr

 

[qorax]

GP Spheroid TPed√

Build pictures here (post #459): http://www.e-cigarette-forum.com/fo...icial-thread-gp-spheroid-46.html#post15441553

 

[qorax]

Just keeping it here

Not been able to put my SX350 bottom feeder down for the last two weeks.

 

[Impulso]

Anyone know what that is? ^



Sent from my iPhone using Tapatalk

 

[SoonerChris]

Anyone know what that is? ^



Sent from my iPhone using Tapatalk

Looks like it might be a Sunbox.


Sent from my iPhone

 

[Impulso]

Looks like it might be a Sunbox.


Sent from my iPhone

Thanks. I looked it up and looks like you are correct. Apparently all 70 million types of mods they sell are all out of stock. Why even have a webpage?


Sent from my iPhone using Tapatalk

 

[callmecletus]

Anyone know what that is? ^



Sent from my iPhone using Tapatalk

If you were asking about the wood mod of gaz0012, that is a Svapiamo sx350 I believe.

Sent from the backwoods of Maine.

 

[Impulso]

Hmmm. Thanks. I found that but didnt know it was that. That's worse than the other. Guess that's why they are high end mods.

Wait list through Facebook. I can't understand that theory. If your mod is so highly sought after, hire 1 or 2 other people and ramp up production. This is a hobby for most of us and trends change so quickly. Might as well as capitalize on the current demand.

Guess I will never own one of these high end mods.


Sent from my iPhone using Tapatalk

 

[willzleg]

Actually the svapaimo's are pretty reasonably priced and they have webpage, pretty much all of there wood mechs are available, iits just the reg's that are out of stock. There is like a serious shortage of regulated BF mods right now

 

[icebat]

Thanks. I looked it up and looks like you are correct. Apparently all 70 million types of mods they sell are all out of stock. Why even have a webpage?


Sent from my iPhone using Tapatalk

Just saw a sunbox e7 in the classifieds on here. Looks like it's still available.

 

[SoonerChris]

Anyone make the list for the Goya by Yaya Mods? I'm 046 on the first list. Picked DNA40 and red for color.

Goya is made by a Bulgarian modder name Yavor Kondov. The list was published yesterday at their FB group with 120 pcs produced on first batch, and another 120 pcs on second batch