What was the wood combo of this one It sure is nice lookin'.
Hog's Mods
- Thread starter Hogwart
- Start date
- th_trl_thread_readers 0
- Status
I believe it's the Ironwood w/satine endcaps/inlay
Correction: endcaps/inlay are Sycamore..
Correction: endcaps/inlay are Sycamore..
Last edited:
20%. So it's a 40 proof beer. Loloh yea the 120 is amazing , what percent is it like 15?
lol the fat tire we just started getting here chere, its ok, i hear there is a big difference between east coast and west coast beer, and i think i prefer the east coast
yes i did alot of chugging back in the day... college the 1st time around was fun to say the least, just wish i could remember some of it lol
yea thats it, i knew it was pretty hardcore. they got a bunch like that...i need to try some more of them but my town has a really bad selection
bud?? come on man thats horse piss, if your gonna go cheap at least go with miller,coors, rolling rock, shoot, keystone is better then bud!! lol
Let's get these beauties sold so Mike can order the VV chips!
They are too awesome to be buried back where they were.
#57
Quarter Sawn Red Oak with Bocote Caps and Inlays
Sating Arm-R-Seal finish
Price as shown with shipping included $120
#59
Hickory with Bolivian Rosewood Caps and Inlays
Teak oil finish
Price as shown with shipping included $120
#60
$120
Black Walnut with Cocobolo caps and Inlays
Matte Arm-R-Seal Finish
#62
$120
Jotoba with Lacewood caps and inlays
Gloss Arm-R-Seal Finish
They are too awesome to be buried back where they were.
#57
Quarter Sawn Red Oak with Bocote Caps and Inlays
Sating Arm-R-Seal finish
Price as shown with shipping included $120
#59
Hickory with Bolivian Rosewood Caps and Inlays
Teak oil finish
Price as shown with shipping included $120
#60
$120
Black Walnut with Cocobolo caps and Inlays
Matte Arm-R-Seal Finish
#62
$120
Jotoba with Lacewood caps and inlays
Gloss Arm-R-Seal Finish
lol Miller tastes like crap and Coors tastes like tap water =)
I also like Gordon Biersch Märzen
Paypal should have my funds to me by tomorrow so I can order up the chips. I hope to have the mods done and just waiting for chips this weekend if all goes right. then its just installing the regulators when they show up.
Cheap beer is all just cheap beer. I'll drink any of it if I want to get a buzz. I like beer. If I want to reeeeaaaallly enjoy it, it's microbrew time. 
Man would someone tell my wife is just tap water so she stops worrying about how many of them I drink a night?
I haven't asked to post on BWB thread...
Anyone know how long it usually takes for them to get juice in stock?
Been wanting to try that malty toffee and order some more casablanca
Anyone know how long it usually takes for them to get juice in stock?
Been wanting to try that malty toffee and order some more casablanca
i've been waiting forever to get some of the ry4 (never had it) and more of the ejoker (afraid to use my last few drops).
If you can still comprehensibly type, you're good.
Google implemented this. I think it was some time around April Fool's Day, but it lives on in the GMail Labs.
Mail Goggles
Ok, just so I don't read a post years from now and realize "You're doin' it wrong"...
How am I supposed to refill the feeder? After unscrewing the cap, the tube is still firmly lodged both in the bottle and on the tube connected to the atomizer threads. So I can either:
I like 2 the best because you can fill the bottle easiest with all of it removed, but there's not a lot of room to work with to snap it back in place.
How am I supposed to refill the feeder? After unscrewing the cap, the tube is still firmly lodged both in the bottle and on the tube connected to the atomizer threads. So I can either:
- pull the entire feeder out by disconnecting from the atomizer threads
- pop the dropper top off of the bottle, remove the bottle, and leave the silicone (I think) tube in the mod
- pull the tube out of the bottle. I imagine this is the worst option as it would be tricky to get it back in place.
I like 2 the best because you can fill the bottle easiest with all of it removed, but there's not a lot of room to work with to snap it back in place.
- Status
Similar threads
