Hog's Mods
- Thread starter Hogwart
- Start date
- th_trl_thread_readers 0
- Status
let me pull it forward. check out the youtube vid Bianca was nice enough to make, its in the tips part
the actual cap to the bottle is not needed and can be tossed, I don't think I'm even going to put those in there anymore
Last edited:
Please all keep in mind I build these mods as a hobby, It is not my full time job. I apoligize is the wait for a mod is longer than expexted but I believe it will be worth the wait once your Hog is in your hands.
Here's the rough requesting process...
Once a batch is sold I will open up requests for mods, when I have 10-15 requests requests will be closed untill that batch is finished. When a request is made you will be able to choose...
1. Type of wood for body
2. Type of wood for caps and inlay
3. Black Switch or Stainless Steel Switch(add $5)
4. 3.7v using 18650 batt and 6ml bottle $110, VV using 18350 batts and 6ml bottle $160, 3.7v non-feeder $90, or VV non-feeder $140
5. Gloss or Matte Arm-R-Seal finish (best protection), Tung Oil finish, Danish Oil finish, Boiled Linseed Oil finish, or Teak Oil finish
6. Choice of LED bottle illumination. Choices are White, Blue, Red, Purple, Green, Yellow, and No LED
Shipping $5
The voltage regulator that in used in the the VV's can be found here 3A Adjustable step down switching voltage regulator
Your Hog will come with 2 bottle assemblies, extra bottle assemblies are available at $2 each.
When a request for a mod is made It will go into a journal of mods to make in what order and I will do my best to get it made in a timely fashion. Understand that I build these after work and a little on the weekend and "Timely" might mean it might take a few weeks.
When the requested Mod is finished I will contact the person that has requested the Mod and they will have 3 days to Pay for the mod so that it can be shipped. If payment is not made within those 3 days the Mod will be offered up to first come, first serve on the forum.
I will try to keep the mods coming out in order of of requests but please understand that if I have wood on hand to finish someones mod request that was placed after yours but I'm still waiting on your wood to ship, theirs will most likely be done first.
I will post a list of wood I currently have access to locally before I start taking requests. If the wood you desire is difficult to obtain or quite a bit more costly than the exotics I have available locally, the cost of your mod might slightly increase in price or require a deposit to obtain your wood. This will be discussed with you after your request has been made and I can locate your desired wood.
If you wish to request a mod made from Staburl, I will do my best to accomodate you. Since the color variation from block to block varies so greatly and some blocks come with voids that can not be worked around, I will not be purchasing the Staburl myself. If you wish to have your Hog made from Staburl you will have to purchase the blocks yourself and have them shipped to me. But please be aware that I can not garantee that your blocks will be usuable or that your blocks are exactly the color you were expecting once finished. And also be aware that I am very careful when using Staburl but at times it does like to chip out, accidents happen no matter how careful I am. I will not be held liable if your block does not make it through the tooling process. Regular Pricing applies.
The Hog mod is really a beautifully made wooden mod in its simplest form. There are no extra frills in a Hog that adds to the bulk of the mod which make a Hog one of the smallest Wooden Mods on the market today not to mention one of the least expensive. There is no Master on/off switch. if you wish to throw your Hog into your purse or pocket, I recommend unscrewing the atty a turn or popping the battery out.
I'm not sure how many Bottom feeder vendors will tell you something like this but I will, THE HOG MOD DOES NOT LEAK, PERIOD
Here is where I would post some tips and tricks for you about how to use the Hog and remedy any issue you might have.
If and when an issue ever come up with a Hog I'll fill this spot in. =)
Ok Ok there is one tip from BiancaMontgomery on the easiest method for filling you bottle in the Hog.
Hog Mod easy bottle fill - YouTube
We also have the first video review of a 3.7v Hog.
Kanal von aught3firefly - YouTube <--Pchela Youtube Hog Review
Here we have a couple written reviews
http://www.e-cigarette-forum.com/fo...-saved-my-relationship.html?highlight=Hog+mod
http://www.e-cigarette-forum.com/fo...s-great-mod-modern-art.html?highlight=Hog+mod
If you currently own a Hog, please feel free to share your pics in the Family photo album
http://www.e-cigarette-forum.com/fo...how-us-your-hog.html?highlight=Hog+mod+photos
Here is a list of the wood I have on hand in the garage.
All has been wet down to show rough look of finished wood. Most will be just a tad bit lighter than shown.
Wood for Bodies
Top Row, left to right: Black Walnut, Marble Wood, Bolivian Rosewood, TN Red Cedar, Canary Wood, Purpleheart.
Bottom Row, left to right: Zebra Wood, Maple, Goncalo Alves, Quarter Sawn Red Oak, Wenge
Wood I have for Caps and Inlays
Top row, Left to right: Walnut, Very Orange Cocobolo, Purpleheart, Yellowheart, Black Palm, Zebra Wood
Middle row, left to right: TN Red Cedar, Canary Wood, Lacewood, Bocote, Marble Wood
Bottom, Bolivian Rosewood
Wood I can get bodies as well as caps and inlays from
Bolivian Rosewood
Vera Wood
Curly Maple
Satine
Ironwood? I have enough of this for a couple Mods Several woods are refered to as this and I do not know which this is exactly =(
Adding to the list. These will be bodies, caps, and inlays.
Left to right: Sapele, Figured Claro Walnut, Sycamore, Holly
Left to right: Kingwood, Yellowheart, Padauk
Left to right: Bocote, Cocobolo, Redheart
Left to right: Claro Walnut, Hickory, Bubinga
So the list so far of woods on hand are as followed.
Added cost for certain woods if used for main body in red. Half that cost if used for Caps and inlays.
Maple
Curly Maple + $10
Purpleheart
Yellowheart
Redheart + $10
Quarter Sawn Red Oak
Marble Wood
Black Walnut
Figured Claro Walnut
Claro Walnut
Canary Wood
Goncalo Alves
Wenge
Birch
Vera Wood + $10
Bocote + $10
Cocobolo + $10
Bolivian Rosewood
Holly + $15
Kingwood + $10
Bubinga
Tenessee Red Cedar
Hickory
Padauk
Sycamore
Sapele
Satine
Jatoba
Gaboon Ebony $15
Here's the rough requesting process...
Once a batch is sold I will open up requests for mods, when I have 10-15 requests requests will be closed untill that batch is finished. When a request is made you will be able to choose...
1. Type of wood for body
2. Type of wood for caps and inlay
3. Black Switch or Stainless Steel Switch(add $5)
4. 3.7v using 18650 batt and 6ml bottle $110, VV using 18350 batts and 6ml bottle $160, 3.7v non-feeder $90, or VV non-feeder $140
5. Gloss or Matte Arm-R-Seal finish (best protection), Tung Oil finish, Danish Oil finish, Boiled Linseed Oil finish, or Teak Oil finish
6. Choice of LED bottle illumination. Choices are White, Blue, Red, Purple, Green, Yellow, and No LED
Shipping $5
The voltage regulator that in used in the the VV's can be found here 3A Adjustable step down switching voltage regulator
Your Hog will come with 2 bottle assemblies, extra bottle assemblies are available at $2 each.
When a request for a mod is made It will go into a journal of mods to make in what order and I will do my best to get it made in a timely fashion. Understand that I build these after work and a little on the weekend and "Timely" might mean it might take a few weeks.
When the requested Mod is finished I will contact the person that has requested the Mod and they will have 3 days to Pay for the mod so that it can be shipped. If payment is not made within those 3 days the Mod will be offered up to first come, first serve on the forum.
I will try to keep the mods coming out in order of of requests but please understand that if I have wood on hand to finish someones mod request that was placed after yours but I'm still waiting on your wood to ship, theirs will most likely be done first.
I will post a list of wood I currently have access to locally before I start taking requests. If the wood you desire is difficult to obtain or quite a bit more costly than the exotics I have available locally, the cost of your mod might slightly increase in price or require a deposit to obtain your wood. This will be discussed with you after your request has been made and I can locate your desired wood.
If you wish to request a mod made from Staburl, I will do my best to accomodate you. Since the color variation from block to block varies so greatly and some blocks come with voids that can not be worked around, I will not be purchasing the Staburl myself. If you wish to have your Hog made from Staburl you will have to purchase the blocks yourself and have them shipped to me. But please be aware that I can not garantee that your blocks will be usuable or that your blocks are exactly the color you were expecting once finished. And also be aware that I am very careful when using Staburl but at times it does like to chip out, accidents happen no matter how careful I am. I will not be held liable if your block does not make it through the tooling process. Regular Pricing applies.
The Hog mod is really a beautifully made wooden mod in its simplest form. There are no extra frills in a Hog that adds to the bulk of the mod which make a Hog one of the smallest Wooden Mods on the market today not to mention one of the least expensive. There is no Master on/off switch. if you wish to throw your Hog into your purse or pocket, I recommend unscrewing the atty a turn or popping the battery out.
I'm not sure how many Bottom feeder vendors will tell you something like this but I will, THE HOG MOD DOES NOT LEAK, PERIOD
Here is where I would post some tips and tricks for you about how to use the Hog and remedy any issue you might have.
If and when an issue ever come up with a Hog I'll fill this spot in. =)
Ok Ok there is one tip from BiancaMontgomery on the easiest method for filling you bottle in the Hog.
Hog Mod easy bottle fill - YouTube
We also have the first video review of a 3.7v Hog.
Kanal von aught3firefly - YouTube <--Pchela Youtube Hog Review
Here we have a couple written reviews
http://www.e-cigarette-forum.com/fo...-saved-my-relationship.html?highlight=Hog+mod
http://www.e-cigarette-forum.com/fo...s-great-mod-modern-art.html?highlight=Hog+mod
If you currently own a Hog, please feel free to share your pics in the Family photo album
http://www.e-cigarette-forum.com/fo...how-us-your-hog.html?highlight=Hog+mod+photos
Here is a list of the wood I have on hand in the garage.
All has been wet down to show rough look of finished wood. Most will be just a tad bit lighter than shown.
Wood for Bodies
Top Row, left to right: Black Walnut, Marble Wood, Bolivian Rosewood, TN Red Cedar, Canary Wood, Purpleheart.
Bottom Row, left to right: Zebra Wood, Maple, Goncalo Alves, Quarter Sawn Red Oak, Wenge
Wood I have for Caps and Inlays
Top row, Left to right: Walnut, Very Orange Cocobolo, Purpleheart, Yellowheart, Black Palm, Zebra Wood
Middle row, left to right: TN Red Cedar, Canary Wood, Lacewood, Bocote, Marble Wood
Bottom, Bolivian Rosewood
Wood I can get bodies as well as caps and inlays from
Bolivian Rosewood
Vera Wood
Curly Maple
Satine
Ironwood? I have enough of this for a couple Mods Several woods are refered to as this and I do not know which this is exactly =(
Adding to the list. These will be bodies, caps, and inlays.
Left to right: Sapele, Figured Claro Walnut, Sycamore, Holly
Left to right: Kingwood, Yellowheart, Padauk
Left to right: Bocote, Cocobolo, Redheart
Left to right: Claro Walnut, Hickory, Bubinga
So the list so far of woods on hand are as followed.
Added cost for certain woods if used for main body in red. Half that cost if used for Caps and inlays.
Maple
Curly Maple + $10
Purpleheart
Yellowheart
Redheart + $10
Quarter Sawn Red Oak
Marble Wood
Black Walnut
Figured Claro Walnut
Claro Walnut
Canary Wood
Goncalo Alves
Wenge
Birch
Vera Wood + $10
Bocote + $10
Cocobolo + $10
Bolivian Rosewood
Holly + $15
Kingwood + $10
Bubinga
Tenessee Red Cedar
Hickory
Padauk
Sycamore
Sapele
Satine
Jatoba
Gaboon Ebony $15
Ah, ok. So my #2 then. I was using with the cap still in there, which works, but was making it a tight fit.
Thanks!
Well, I know that if/when Issac ever does reopen his new/improved website....it's gonna probably crash just from the influx of people trying to buy his stuff. A LOT of people that use his attys/cartos exclusively have been chompin' at the bit waiting...plus those who are new to the IKEN experience are waiting...so, it's not gonna be pretty and I feel for Issac when he does open again...I hope he has a lot of stock built up and extra help!
Issac is close he got codes yesterday.
Sent from my DROIDX
the site just opened back up the other day and it was closed a few weeks so im guessing it all went really quick, i got some applewood and honey flue cured (my two favorites) he should prolly get the malty toffee fairly quick, the casablanca is pretty popular so im not sure, but both of those you can click notify me and youw ill get an email when they are in stock, ive used it and it works pretty good
i hear the notify me doesnt work for the ejoker or ry 4 though
i hear the notify me doesnt work for the ejoker or ry 4 though
Share the mod or the drink? Yesterday I would have shared the mod before the drink...but today I'd share the drink over the mod. Obviously I'm willing to share...you just have to catch me on the right day to get the right thing. (does that sound dirty?
)Yeah, I say loose the cap but leave the tube connected. Also leave your atty or carto on cause when you pop that cap back in place it forces a drop or two up into the connector.
I know I did in the video, but I don't even take the battery out of mine anymore when I fill it up.
Har, har...cause she is dumb enough to believe that one! Mike. even has a shirt that says "the liver is evil, it must be punished" I believe its an ad for rum.
Has anyone seen or heard of heineken tewabach(spl?) Mike has been searching for it for years. Id be willing to pay whatever it takes to get him some!
Neither is MINE!!! I wanted to cry when they said I didn't have any packages at the post office!!!! Now all I can do is wait and hope it's there SATURDAY now! 
Neither is MINE!!! I wanted to cry when they said I didn't have any packages at the post office!!!! Now all I can do is wait and hope it's there SATURDAY now!
Awwwwwww the post office shouldn't make beautiful women wait for wood to come
Haaaaaaaaaaaaa....story of my life Krisp. OH...btw, I ordered 2 bottles of that Parkes 'Snickerdoodles' juice seeing as it was on sale. I was not told by you that it was...I just happened to go into the "steals and deals" on ECF and notice that you posted that it was their 'flavor of the week'. Did the juice I sent you arrive yet?
Lol you weren't told by me but you saw post I made.....you funny
And ask Bianca its great juice. But no
your package didn't arrive. Maybe Saturday
Mike...he usually has those two restocked when out in only a few days time, but seeing as his website just went back online, he might be bombarded with orders; therefore, it might take him a few extra days to mix up a new batch. I just went to the site and seen that he has 20 of the Casablanca in stock tho. Nothing on the Malty Toffee tho. Sign up to be notified when it becomes available and as soon as he posts the amount he has in stock, you'll get an email
I heard "wood" and "Snickerdoodle" from alllll the way across ECF and got over here as fast as I could!
B...I bought 2 30ml bottles of the Parkes Snickerdoodle last night cuz' it's the "flavor of the week" special
B...I bought 2 30ml bottles of the Parkes Snickerdoodle last night cuz' it's the "flavor of the week" special
I buy it 4oz at a time and vape every drop of it. Nom nom nom. I hope you'll enjoy it.
B...I bought 2 30ml bottles of the Parkes Snickerdoodle last night cuz' it's the "flavor of the week" special
if you dont like the juice, i think chelle will be RIGHT OVER to pick it up
Well, I think 60ml will be sufficient to TRY it. I think I will like it tho and I know there will be more sales coming up for the holidays I still have to get my order in for some more RAWR vapors juices yet (before their sale is over too) I just love their Green Peach Tea and Truth Serum!!
I still have to get my order in for some more RAWR vapors juices yet (before their sale is over too) I just love their Green Peach Tea and Truth Serum!!I buy it 4oz at a time and vape every drop of it. Nom nom nom. I hope you'll enjoy it.
- Status
Similar threads
