How can I get thicker vapor?

[Vedra]

Well PB was vaping at 5.2v... I max out at 4.8v. I think that's a great reason for me to upgrade units, don't you?

Since posting this I'm kinda realizing that my equipment and juice are doing their job.. I think the problem is more that I recently reduced my nic levels and therefore taking longer draws, getting less TH, vaping a lot more often and probably getting sensitized to the flavors.

I just thought that if I could find a way to get my vape denser, it might be more satisfying. I really want to learn more about RBAs... First to get a better vape but also to be prepared "just in case" vaping stuff becomes less available in the future.

Thanks again for the info, all.

Sent from my HTCEVOV4G using Tapatalk 2

Just jump in and buy an igo, some kanthal, and some sterile 100% cotton. You'll need a decent multimeter too. Prolly do the whole thing around 30 bucks if you're thrifty.

 

[kbjoran]

I don't know what you were smoking in the old days of analogs but I can guarantee you're getting FAR more vapor/output nowadays!

 

[fabricator4]

What Attypops said. The usual problem with bottom coil devices not performing are not wicking, flooding, or it's clogged up. It would be gurgling if flooding, dry hitting if not wicking, and if neither of these and it WAS working but isn't now, it's clogged up.

An Evod at the right voltage is a wonderful thing, but you don't need quite as much (voltage) as you expect on a bottom coil device. To advise you on this we really need to know the exact voltage of your coil, but I'll give some guidelines for the three most common: 1.8 ohm my recommendation is 3.3V: 2.4 ohm, my recommendation is 3.8V: 2.6 ohms my recommendation is 3.9V. Tweek it up or down from there but you will be in the ball park. This gives the best balance of vapour and flavour in my experience with this and other bottom coil devices, and you should be getting plenty of both. If you turn it up slightly to get more vapour, you may find that you get less flavour and will run the risk of burning the juice.

 

[dogbertusceasar]

Has anyone tried this before?

Wizard Stick Fog Generator $18.89 Order Toll Free 1-888-78-2019

Laugh if you wish, but look at the specs: uses 6 AAs (you can get rechargeable), and if memory serves the tank holds 30ml at a time!
Plus you won't find a better price!

Hope this helps! (or at least gives us a chuckle)

 

[macdo]

Has anyone tried this before?

Wizard Stick Fog Generator $18.89 Order Toll Free 1-888-78-2019

Laugh if you wish, but look at the specs: uses 6 AAs (you can get rechargeable), and if memory serves the tank holds 30ml at a time!
Plus you won't find a better price!

Hope this helps! (or at least gives us a chuckle)

LMAO!!! That looks soooo wrong. Looks like her toy caught on fire

 

[JColt]

Looks like a sex toy... A Large One!

 

[degnr8]

Has anyone tried this before?

Wizard Stick Fog Generator $18.89 Order Toll Free 1-888-78-2019

Laugh if you wish, but look at the specs: uses 6 AAs (you can get rechargeable), and if memory serves the tank holds 30ml at a time!
Plus you won't find a better price!

Hope this helps! (or at least gives us a chuckle)

I tried to mod one of those years ago. Had it as my avatar for quite a while too. Don't remember why it didn't work now, but I think it had to do with the heating element. Now that we have VV and RBAs I might have to try it again.

 

[dogbertusceasar]

Looks like we have at least one success;

 

[Heavyrocker]

I've been using a Vision spinner with EVODs or 510 attys, and I notice myself drawing on it for the full 10 seconds until my battery shuts off automatically. What can I get that will I make more vapor faster?

Use a mesh wick.The protank has the same heads,dont forget too oxidize the wick good.

http://www.youtube.com/watch?v=BlauTJTr0jU