I don't have a lanyard and carried my 905 in my pants pocket while doing yardwork. Worked well for several days until I felt my thigh burning, catomizer completely melted. I had a small crown royal bag with a drawstring closure. It holds my 905 or box mod perfectly with the tip just sticking out. I attached a leather lanyard and hang it like a necklace. When I want a vape I can do it quckly and the velvet of the bag makes it easy to press the button. It isn't a great fashion statement but is great in the yard or on the mower.
- Status
honestly i use a hard glasses case with extra padding (pillow stuffing), and then i just put it in my pocketor hip bag depending on what i wear that day 
I primarily use a Thermo from litecig. The button placement is great. I carry it right in my pocket and it has never turned on accidently. Great PV and I'm glad I bought it.
for the desk... used to use an espresso cup... now it's a tall shot glass with two pieces of cardboard intersecting to form an X shape... creates 4 smaller sections ... usually holds an ego and 3 510s... keeps the 510s from laying against each other which sometimes seems to wick the liquid out.
on the go I put them in my "purse" or where ever they fit without the buttons getting pressed
on the go I put them in my "purse" or where ever they fit without the buttons getting pressed
I really wish someone would come up with some choices for an 'ashtray-type' holder to set an e-cig in while your vaping. At work I just lay in on my desk, but it can get knocked around that way and at home when I'm sitting and playing the guitar I don't have anything to set it in/on that really secures it.
Had a a lot of pen sleeves left over from when I use to make pens. Made of imitation velvet in red, black, or gray. Great for carrying in shirt pocket because it contains any leakage...I just toss 'em if that happened, but could be rinsed out.
Bought them from woodcraft.com, 10 for about $5 I believe. btw, I recall that they also had an extensive selection of pen presentation cases that could easily be adapted...may look into that later.
Bought them from woodcraft.com, 10 for about $5 I believe. btw, I recall that they also had an extensive selection of pen presentation cases that could easily be adapted...may look into that later.
I made this one for my desk from a piece of 1"x1"x3" with some 3/8" holes.
Don't have any pockets in my shirts and everything falls out of my pants pockets when I get in the car, so I'm still looking for something like a lanyard with a pouch to carry one in when I'm out.
Don't have any pockets in my shirts and everything falls out of my pants pockets when I get in the car, so I'm still looking for something like a lanyard with a pouch to carry one in when I'm out.
Attachments
Made this at work out of stuff I had laying around.
The case is for a Multitool I think, it's about 4.5in tall 1.75 wide and deep and has a belt loop but fits in my pocket. I found some foam with half circles cut in it so I took two of them cut them to size and taped them together. I made a sleeve to put inside of that out of velcro and cut a notch in the front for the battery button. I super glued more velcro on the front and top. Then I made a detachable holster for 2 cartridges out of more velcro and superglue, the fuzzy part is in the inside of the loops.
The case is for a Multitool I think, it's about 4.5in tall 1.75 wide and deep and has a belt loop but fits in my pocket. I found some foam with half circles cut in it so I took two of them cut them to size and taped them together. I made a sleeve to put inside of that out of velcro and cut a notch in the front for the battery button. I super glued more velcro on the front and top. Then I made a detachable holster for 2 cartridges out of more velcro and superglue, the fuzzy part is in the inside of the loops.
I'm using the 808d-2/E-9 and just stuff it into me shirt pocket. But I gotta be sure that I get it wedged in good and tight, lest it fall into the sanding bucket
I usually carry 3 batteries, and 5-7 cartos. I leave all but one in the car, and usually go through 3 cartos, and one battery, in a days time at work. At home I've got me PT,
and several cartos to choose from, Usually go through another 3 cartos or more at home.
I usually carry 3 batteries, and 5-7 cartos. I leave all but one in the car, and usually go through 3 cartos, and one battery, in a days time at work. At home I've got me PT,
and several cartos to choose from, Usually go through another 3 cartos or more at home.
I have my Screwdriver on a neck lanyard because I'm notorious for dropping and breaking things. I try not to wear it out in public but sometimes I have to (very rarely though). So when I'm in public without the lanyard I just hold it in my hand. It's too big for my pocket considering the size of jeans I wear lol
You can use a regular ashtray if you have a mini that is the same diameter as an analog (most usually are)D103 said:
I got a nice and cheap little aluminum case from Cignot. Only $3.50 and works fine. It's got a liner to absorb any leaking.
Ecig Case
Lori
Ecig Case
Lori
Got a big ole copper pipe 18650/510 mod.
@ work it's either in my hand,laying on the workbench,
or (seldom) in my shorts pocket.
@ home I just stand it up on an end table.
Don't really use the lil joye 510 guys much anymore
unless I'm out @ the bars etc,in my shirt pocket.
@ work it's either in my hand,laying on the workbench,
or (seldom) in my shorts pocket.
@ home I just stand it up on an end table.
Don't really use the lil joye 510 guys much anymore
unless I'm out @ the bars etc,in my shirt pocket.
i bought a case from strictlyejuice for my joye 510 at 4.50. its a nice case, works good enough for me, holds 1 extra battery and i have 5 carts in it, u can put 4 and an extra atty..
https://strictlyejuice.com/index.php?main_page=index&cPath=67_46
https://strictlyejuice.com/index.php?main_page=index&cPath=67_46
Last edited:
At my desk at home, I use a jigger to hold them. I've gotten to where I only take one PV with me to work, and that's my TorneGo. It stands straight up on the battery end on a stable surface ... that's neat.
I found this rubber stopper at work that fits perfectly on the end of my 510. Allows me to rest it upright on the table.
Only problem, if you can call it thatis you cannot see if the led is lit when you press the button.
Would be nice to have one made out of clear rubber so that you can see the led without removing it.
I just hate to lay the pv down on a table or desk, personal issues about hygiene you know. Don't like the thought of my moist drip tip touching and picking things up on it.
Only problem, if you can call it thatis you cannot see if the led is lit when you press the button.
Would be nice to have one made out of clear rubber so that you can see the led without removing it.
I just hate to lay the pv down on a table or desk, personal issues about hygiene you know. Don't like the thought of my moist drip tip touching and picking things up on it.
Attachments
- Status
Similar threads
