Huge Giveaway! Innokin launch their DISRUPTER Device on ECF - 400 To Win

Status
Not open for further replies.

NancyB

Super Member
ECF Veteran
Verified Member
Jan 18, 2013
633
3,010
81
AZ/USA
www.davidshome.com
I got a Picture of my (from left to right) EP, VV and Leo Pro with and with out the pen caps.

00b_zpsb3eef6zr.jpg


The EP and Leo Pro have iClear 10's on them. The iClear 10 was a disposable tank because it had a unchangeable coil. And the VV has a proprietary magnetic atomizer which in later versions was changed to a 510 connection.

I think Innokin stopped making the iClear 10 because they stopped listing them on the Innokin web site. Once they stopped making the iClear 10 the iClear 16 was the smallest iCear tank at the time.
And the Pen Caps wouldn't fit over the iCear 16. This might be why they stopped putting the pen caps in the kits. I have seen the pen caps for sale on the web, but not sure if they are authentic Innokin pen caps.

I do see a iClear 12 listed now, which looks like the same size as the iClear 10 but with Replaceable Coil Heads. iClear 12 I will try to find some iClear 12's to see if they fit under my pen caps on the Leo Pro and the EP.

I really like the idea of the Pen looking mod, and I wish Innokin would come out with a newer version of this.

Those are really nice looking units! I've never seen them before - thanks for sharing the information!!
How long did the batteries last (in the beginning) ? Are they comparable with the 650 simple batteries? 2-4 hrs or so?
 

redrebel821

ECF Guru
ECF Veteran
Verified Member
Jan 8, 2015
11,224
78,226
Houston area
Those are really nice looking units! I've never seen them before - thanks for sharing the information!!
How long did the batteries last (in the beginning) ? Are they comparable with the 650 simple batteries? 2-4 hrs or so?
I thought those were cute, too.
 

NancyB

Super Member
ECF Veteran
Verified Member
Jan 18, 2013
633
3,010
81
AZ/USA
www.davidshome.com
Hey @jcco, sorry to hear that you're having issues with shipping to a US PO Box. I looked into it and it seems that for international shipping it's not possible with the couriers we use DHL, UPS, FedEX etc..

Do you have a friend we could ship it out too? If not I'm sure I could help you out by getting the device shipped to one of our team in America who can then forward it to your PO Box. I'm based im the UK, so unfortunately wouldn't personally be able to do so.

Perhaps then, use the Post Office's address and say General Delivery on the envelope, might work. Then the receiver could pick it up at the Post Office. (or the PO could put it in the receiver's mail box?)
 

NancyB

Super Member
ECF Veteran
Verified Member
Jan 18, 2013
633
3,010
81
AZ/USA
www.davidshome.com
Speaking of which, Oh and Good Morning all, I question the use of a 2.0 ohm coil in a tank designed mainly for lung hits. What would the user have to do in adjusting the tank, if any, to use the high resistance coil? Now I can see this working for a MTL as long as the AF was dialed down and the drip tip changed out to a small bore.
Can someone enlighten me?:)

I would first need a translation into my native tongue '70 yr old' English, to understand the question!
Can you imagine what a brand new vaper would think when reading this little entry?
....mainly this part... "Now I can see this working for a MTL as long as the AF was dialed down and the drip tip changed out to a small bore."
HAHA just joshin' ya here... (but I really don't know what a MTL or AF is)
 

Panorama911

Ultra Member
ECF Veteran
Verified Member
Dec 24, 2012
2,876
8,857
68
Kansas
It looks like my iSub G tank will be here Friday or Saturday, probably Monday though, but I say this with the luck I have been having....won a dollar on the lottery, a Disrupter and a couple weeks back an Aspire mod/tank. WAIT...that is 3...psycho_1.jpg I think my luck may have run out....better go take a nap
40a56b55.x120.gif
 

jseah

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2015
4,112
19,429
Hudson Valley, NY, USA
I would first need a translation into my native tongue '70 yr old' English, to understand the question!
Can you imagine what a brand new vaper would think when reading this little entry?
....mainly this part... "Now I can see this working for a MTL as long as the AF was dialed down and the drip tip changed out to a small bore."
HAHA just joshin' ya here... (but I really don't know what a MTL or AF is)
MTL - mouth to lung
AF - air flow
 

USMCotaku

ECF Guru
ECF Veteran
Apr 25, 2014
11,877
45,735
California
If they are using DHL or the like, lack of home delivery from USPS isn't an issue. Just use your street address, dhl will get it there. I'm in similar circumstances here. No issues with house delivery through dhl or fed ex. The trick when ordering is knowing how that company delivers, but that was answered earlier, you should be good to go.
Sent with one hand, the other is busy vaping.
 

redrebel821

ECF Guru
ECF Veteran
Verified Member
Jan 8, 2015
11,224
78,226
Houston area
It looks like my iSub G tank will be here Friday or Saturday, probably Monday though, but I say this with the luck I have been having....won a dollar on the lottery, a Disrupter and a couple weeks back an Aspire mod/tank. WAIT...that is 3...View attachment 474457 I think my luck may have run out....better go take a napView attachment 474456
Everyone start rubbing the Buddhas belly for luck, then!!!
 

cooladdict

Vaping Master
ECF Veteran
Verified Member
Apr 28, 2012
7,735
49,856
59
Seahawk Nation
It looks like my iSub G tank will be here Friday or Saturday, probably Monday though, but I say this with the luck I have been having....won a dollar on the lottery, a Disrupter and a couple weeks back an Aspire mod/tank. WAIT...that is 3...View attachment 474457 I think my luck may have run out....better go take a napView attachment 474456
Mine is scheduled to be here tomorrow, too! I am definitely going to have to break it in before I get my Disrupter, lol. :)

EDIT: I just got mine!!!! Of course the mail boy in question (from previous post) brought my Keurig order up to my deck (and dropped it over the gate) but he left my VAPEMAIL in the box across the street. :grr:
 
Last edited:

NancyB

Super Member
ECF Veteran
Verified Member
Jan 18, 2013
633
3,010
81
AZ/USA
www.davidshome.com
I thought my Vape station idea was a good one, but I guess not. I guess I'll just have to tear one of my soldering stations apart and modify it into what I want.

If I'm reading the title of the thread right, they are giving away another 380 Disruptors... Still pretty decent odds.

Sorry @SomeTexan - living in an 8 foot wide home on wheels just doesn't allow us much room to spread out! (but we've begun looking at stick built homes solidly set on earth for our remaining years... so who's to know, perhaps in the future your idea will be right up our alley!?!) I like little inventions that make life easier!
 

SomeTexan

Moved On
Jun 1, 2015
986
1,739
43
Sorry @SomeTexan - living in an 8 foot wide home on wheels just doesn't allow us much room to spread out! (but we've begun looking at stick built homes solidly set on earth for our remaining years... so who's to know, perhaps in the future your idea will be right up our alley!?!) I like little inventions that make life easier!

I can understand that. My retirement plans include a big boat and various uninhabited islands. Not much room even though I'm looking at stuff in the 100'x25' range... Engines and generators take up a lot of room. So does food, fuel, water and other necessities.
 

-Redd-

Super Member
ECF Veteran
Nov 23, 2013
725
2,007
A Brit in the Land of Clogs
Hello everyone,

Just a little request from us at Innokin.

We'd love it if the winners could post photos within this thread of themselves with the branded ECF Disrupter & InnoCell they've won, it would be awesome to see you guys with the devices. If you're camera shy, a simple handcheck would do!

We'll also post the pictures, on our social sites like Instagram and Pinterest.

Also for anyone wondering where you could pick up the Disrupter and InnoCell here's a link. :)

PVS & Mods | Innokin Disrupter Box Mod | VaporBeast

Thank you!

Oh Gawd :blush::blush::blush:
 

retired1

Administrator
Admin
Supporting Member
ECF Veteran
Verified Member
Apr 5, 2013
51,521
46,569
Texas
I can understand that. My retirement plans include a big boat and various uninhabited islands. Not much room even though I'm looking at stuff in the 100'x25' range... Engines and generators take up a lot of room. So does food, fuel, water and other necessities.

This just means you aren't thinking big enough. That's why they make barges that can be towed behind the boat. :D

DSC_7807.JPG


Now if that ain't big enough to carry all your vape supplies, I think we have a larger problem that needs to be worked on. :lol:
 
Status
Not open for further replies.

Users who are viewing this thread