HV atty's on the VV Woodvill?

[Jeann]

we had 1.7 and 2.0 ohms on the mini and the grand and it turns out that LR isn't our thing. basicly we are happy with SR but having our vvw am interested to try some HV, so been looking around and found some 3.8 and 4.2 ohms atty's within bying range. would those work on the vvw? seen aslo some 2.5 ohms, would those make much difference? i have now 2.4 ohms on my vv...oh and i can also try those LR's on them

 

[colt45]

2.5 ohm seems to be the most popular on the VVW

 

[Rhapsodies Fire]

Yes, you can try the HV atties, ...they may end up being cool, but again, you may like them. I have been using the 2.5Ω on mine and like it very much. I recently put a 2.0Ω and had to dial it down a bit, but I found a spot that is good with that atty. Wayne has been bouncing between the 2.5Ω and 3.0Ω. I think it comes down to personal preference.

 

[mwa102464]

Just me but I wouldnt go any higher then 3ohms with it maxing out at 5.5-5.6v your probably best off at 2.5-3.0 ohms Jeann, I agree with Rhaps on Fire

 

[washvap]

Agree with the others. Another advantage of the 3 ohm atties is that you will be able to use the full range of the VV REO that you got. Plus, since you don't like LR then this will be your best bet.

There isn't going to be a difference between the 2.4 ohm you have now and a 2.5 ohm. Basically the same thing in my book.

 

[Jeann]

Thank you all!

yeah, was afraid of that, with 3.8 ohm they say it's for 5V-6V and with 5.5V that may be not enough. basicallly we like a warm sweet vape been searching in europe, so far plenty of carto's in that range and a drip-o-mizer of 3.0 ohms witch can't be bottom fed i think. well, i'll ask my love to search, he's good at that, afterall he found the reo's

 

[Jeann]

ha, found some, when i asked about their atty's and that i was looking for 3.0 ohm she told me that her standards come in 2.8ish so i orderd 2 for us to try, also orderd a 306 at 2.4 ohms with a long driptip, along with some batts and base juice. so as from thursday i can stalk the mailman again

also found some 3.2 ohms on a site thats all about GGTS, in single and dual coils, will these GGTS atty's work on bottom feeders, they say they also work on other mods? never had dual coils, are those intresting? they say they give more vapor, but as it is now we allready have some major fog machines

 

[SammyT]

I like to vape around 11-12 watts, so the highest ohms I will go with a 5.5v limit would be 2.5ohm. If you want to use those hv atties you could stack 3.7v batteries in an unregulated mod for 7.4v .


-Sam