Wrap some dental floss under the o-ring and that should tighten the top cap up.
Hybrid Elite Mod by Rainbow Heaven
- Thread starter Lhartman89
- Start date
- th_trl_thread_readers 0
- Status
Wrap some dental floss under the o-ring and that should tighten the top cap up.
:::scribbles furiously:::
Noted for future reference for all ill-fitting caps and drip-tips!
Noted for future reference for all ill-fitting caps and drip-tips!
I've never had to do it, but I have heard it works. You can also go to HD or Lowes and get a o-ring kit and that should have you set for anything lol.
Switch from my K100 threads on there, but it is to short to fire.
The atty portion screws onto the Sig 19 tube, but the Sig switch doesn't thread into the Elite tubes. Go figure.
dont the K100 have vent holes on the switch? on the side? the elite dont have any so this could be a nice swap.
Last edited:
Yeah it does. And that is what I was thinking plus the solid brass screw. But like I said it is a good bit too short.
I`m thinking a Kick could take up that space or maybe the short tube with a longer "bigger" batt. anythings possible. i`m waiting on mine threw vaportekusa so i`m modding it in my head. i plan on polishing it also. i want a mirror look.
Anybody figured out how to get a KICK to even function?
I tried sanding but with no luck. Didn't sand a tremendous amount but did give it a solid "college try."
I tried sanding but with no luck. Didn't sand a tremendous amount but did give it a solid "college try."
I`m thinking that if its the tube you sanded, to make connection and the rba part is still anodized it wouldnt get contact so what if the threads on both ends were sanded some? or am i over thinking this?
I don't think the RBA itself is anodized. Would be curious to hear from other members of the community on the matter though
Thanks
Thanks
Got mine.... everything works good, but I have tried SS wick SS/ekowool hybrid wick. and I have wallowed out the air hole... And it kills the flavor of anything I put in there....Even 5 Pawns Gambit.
So uhhh....who else is waiting on theirs from vaportekusa?
I'm gettin' kinda antsy......
edit:
meant to add, mine is still "Processing" so it's not like it's lost in the mail or anything.
what kinda irritates me is that I ordered way back when they first went up, so I shoulda
been part of the first shipment. unfortunately, i wanted a different color so i emailed
their support. they opened up the order so i could edit it, but all i could do was cancel
it and place a new order. i think that bumped me to the back of the line, so to speak.
oh well. no biggie. i just want my toys, that's all.
I'm gettin' kinda antsy......
edit:
meant to add, mine is still "Processing" so it's not like it's lost in the mail or anything.
what kinda irritates me is that I ordered way back when they first went up, so I shoulda
been part of the first shipment. unfortunately, i wanted a different color so i emailed
their support. they opened up the order so i could edit it, but all i could do was cancel
it and place a new order. i think that bumped me to the back of the line, so to speak.
oh well. no biggie. i just want my toys, that's all.
Last edited:
To be honest, I haven't tried yet ,but it looks easy enough. I'll probably get to it this weekend. If you need your apart before then, it looks like the brass barrel is just twisted into the aluminium outer portion. I'm not sure which way it's threaded though. If I'm looking at it correctly, it should just twist out of the aluminium housing. Just get an adjustable wrench and fit it to the two flat marks on the brass barrel, hold the outer portion with a vice, and twist it out. Be careful with what you use to hold the aluminium part with. I'm sure that it'll scratch easily.
- Status
Similar threads
