5 wraps using 26 gauge k .87..i just need to trim a little more wick from both sides so it can wick properly,subtank is going to save me a few $ now that i know how to rebuild the head.
I cannot build anything
- Thread starter gel drops
- Start date
- th_trl_thread_readers 0
-
- Tags
- kayfun burning
- Status
It seems counter intelligent...... But it wicks much better if you poke the ends of the wick into the wick holes
Not flush..... Just close. Leave a couple of centimeters, then poke in
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
about to wick,coil is good,going just a little bit thinner on the OC.
Huge clouds great flavor the only thing that concerns me is I am only seeing bubbles coming from one side of the head.Must not be an issue because flavor is OK.
USMC...do you always use OC? That is what i have worked with from day one,I do have several different types of it you would think it would all be the same some that I got are inconsistent for some reason I have about three different types OC.
I started out with regular natural cotton balls, but I use Japanese cotton now. The fibers run straighter in it, parallel to each other, which makes it wick better
http://www.fasttech.com/products/0/...cement-glass-tank-for-eleaf-lemo-rta-atomizer
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
I appreciate it USMC..I located 1 from a company in Missouri for 5 dollars free shipping.according to RIP the Lemo has the Billow beat when it comes to the flavor I do like the post I just opened the Billow I intend on using just a single micro on it,the shaft is a little bit long but the machining is good its very clean it's time to go to work going to build something around 1.4 ohms first and see how that works out.
Last edited:
Please trust me when I tell you I had a protank 2, which was great, but think hard about one of the subtanks. They are super easy to build on. I mean I'm not an expert, but I can do it! They use stock organic cotton coils and the RTA section is super easy to build on. Good luck!
You're behind the curve 
That's what we have been discussing for days
All but one of my other tanks have been retired. I use a sub tank with occ heads, a sub tank mini with the rba, and I keep my kayfun lite in rotation as a flavor chaser (running a Clapton coil in it, flavor is off the chain)
Sent with one hand, the other is busy vaping.
That's what we have been discussing for days
All but one of my other tanks have been retired. I use a sub tank with occ heads, a sub tank mini with the rba, and I keep my kayfun lite in rotation as a flavor chaser (running a Clapton coil in it, flavor is off the chain
)Sent with one hand, the other is busy vaping.
I did order another Squape R from MV..One i got from FT,piece of junk they discontinued that particular model it was shorting out on me with all three decks.They are extremely easy to build hopefully the one I ordered last night which is a Ehpro will be better.
I want to hear more about the protank 2 never did have the privilege to get one.I am assuming that is easy and more like the Kayfun when it comes to rebuilding it.
Last edited:
Protank 2? As in the kanger? If that's the one you mean, it's not a rebuildable (though it was my first "upgrade" tank, and I started my building on it's single coil heads).
Sent with one hand, the other is busy vaping.
Sent with one hand, the other is busy vaping.
- Status
Similar threads
