I just got a GGTS but can't vape with it.

[SSRob]

It doesn't look like you have the fuse kit so I'm not worried about checking that.

Have you made any adjustments to the button switch at all? Can you take the top atomizer cap off and verify that the switch is making contact when the center post on the bottom cap?

We'll get you through this...

 

[JDL]

It doesn't look like you have the fuse kit so I'm not worried about checking that.

Have you made any adjustments to the button switch at all? Can you take the top atomizer cap off and verify that the switch is making contact when the center post on the bottom cap?

We'll get you through this...

Thank you Rob. I really appreciate this.


The only thing I did to the button was tighten that lower ring with needle nose pliers because it kept unscrewing on me. Its making great contact with the center post when I push the button

 

[SSRob]

Has to be the atomizers....do you have a voltmeter by chance?

 

[JDL]

Has to be the atomizers....do you have a voltmeter by chance?

Nope I don't have one

 

[mwa102464]

I have had some 510's get a little buggered up with the post on my top cap, did you try very lightly with a needle pulling the bottom part of your Atty out just a tad,, and also taking off your top cap putting your Atty on then screwing the top cap back down snug???

 

[JDL]

I got 3 attys your saying they're all bad. Man I waited 8 days for those and paid $15 shipping. Geez! I hate ordering crap from overseas

 

[mwa102464]

Agree try what im saying

 

[JDL]

I have had some 510's get a little buggered up with the post on my top cap, did you try very lightly with a needle pulling the bottom part of your Atty out just a tad,, and also taking off your top cap putting your Atty on then screwing the top cap back down snug???

No I haven't tried that. The bottom part? Sorry don't get what your saying.

 

[mwa102464]

where that little ring is but where the hole is on the Atty bottom, take a pin and just stick it in a very little bit and pry it upward so it move up or out a bit, also the take off your top cap, screw the Atty on all the way down, loosen up the other sleve on yout GGTS screw on the top cap, then slowly retightwn it back together dont over tightn jsu till you feel it get thst first snug and try it then, if nothing snug just a tad more

 

[mwa102464]

there is a little bit of play on your Atty bottom see what I mean it can be move out a bit towards you

 

[mwa102464]

after you do that little adjustment do as I say on that last post ok

 

[SSRob]

YouTube - Using different atomizers on your GG Telescopic

 

[JDL]

I did everything you said still got nothing

 

[mwa102464]

did you do as Rob just posted exectly, if so the only other thing I can think of if you have a good Atty, and good Batts is your spring on the bottom end cap, if you have that and not the fuse link in the end of you GGTS end cap, is to maybe make sure it has a good contact and maybe pull it out just a smidgend,

 

[JDL]

I did that little adjustment mwa to both my old attys and 1 of my new ones and I got nothing still.

 

[JDL]

did you do as Rob just posted exectly, if so the only other thing I can think of if you have a good Atty, and god Batts is your spring on the bottom end cap, if you have that and not the fuse link in the end of you GGTS end cap, is to maybe make sure it has a good contact and maybe pull it out just a smidgend,

Thats one thing I have not done yet is pull the spring out of the end cap just a little bit.

 

[mwa102464]

stretch it just a tad a small tad

 

[JDL]

stretch it just a tad a small tad

just did now I'm trying all my battery combinations since the first pair is not working

 

[mwa102464]

K make sure your batts are green on the charger

 

[JDL]

3 red 3 green geez! I've been charging different sets all day.