- Status
Well I found out the Tatroe tanks I ordered, wont be in till monday, and might not be shipped till tuesday. I might as well take a pic of my provari now and post it, I was going to wait till I got my new tanks. Here is my 2.5 silver. I am using the provari extension cap, right now because, I also ordered the tatroe ring at the same time as the tanks. I have the drip tips for it though, also in the pic. In my frustration, I went and bought some juice today, Five Pawns Gambit, ( I am trying now Mmmm) Vermillion River Georga Peach, & Mystic Cherry Jr. I also got some
Wicked Good Blueberry Blast.
Wicked Good Blueberry Blast.
Well sense I started this thread, I thought I would bring it back from the dead, because I just got my next order approved, a few weeks ago I ordered some extra batteries, for this order, I ordered 1 pila charger for a back up, 1 satin mini red led, with extension cap, to match my full size. 1 each of the mini, and full size polished, each with ext. caps and blue led's. I already have 2 provari rings from gr modders and 2 hippos, to use on them. On thursday, I ordered a kayfun lite from vaporrev, and I might get that on tuesday.
I hope I get a shipping notice monday but, now I am excited again!
I hope I get a shipping notice monday but, now I am excited again!
Quite a box of treasure coming your way.
I too have two GR pro-rings, I am having a hard time finding good looking tanks with air slots in the bottom caps to be able to use them though. Obviously the Hippos don't have that problem. But do you have knowledge of a good brand of 22mm tanks that allow air to draw even when mated tightly to a GR ring?
I too have two GR pro-rings, I am having a hard time finding good looking tanks with air slots in the bottom caps to be able to use them though. Obviously the Hippos don't have that problem. But do you have knowledge of a good brand of 22mm tanks that allow air to draw even when mated tightly to a GR ring?
Well right now I am hoping the Kayfun will do that, or close, not sure if it is 22mm or not. I am using Tatro tanks right now, I still have not tried the cartos, my problem was that the tatroes, had a hard time making contact with the post. Which I solved with a smok tech air flow controler, its about $4:00 each, which might help you, I am not sure. This site has a weird discription of it, but here it is.
DCT Tank Airflow Controller - Cartomizer / Clearomizer
I do not have these yet, but I will at some point, built in air channels on the bottom cap.
http://lokilab.com/products/ss1-pyrex-stainless-steel-cartomizer-tank
DCT Tank Airflow Controller - Cartomizer / Clearomizer
I do not have these yet, but I will at some point, built in air channels on the bottom cap.
http://lokilab.com/products/ss1-pyrex-stainless-steel-cartomizer-tank
Last edited:
Yeah but wouldn't that take the place of the GR ring? Or did you stack that on top of the GR ring? I don't want anything but flush tank above the ring.
It's out of stock, but it looks like there is a Provari ring that is designed for the kayfun. If this one works, I don't see why the GR ring won't.
Kayfun PV Cone
Kayfun PV Cone
IBtanked has 22m and 25m, but I don't know about airflow (I haven't gotten around to getting rings for my girls). Baditude might know.
Here's a sneak preview for you, so the waiting (hopefully) doesn't consume your soul:
My own KayProFunVariLite w/Hippo. The KFL's air inlet is actually on the side of the deck assembly, so there are no airflow concerns to address on the ProVari. I predict you're gonna be very, very happy indeed.
My own KayProFunVariLite w/Hippo. The KFL's air inlet is actually on the side of the deck assembly, so there are no airflow concerns to address on the ProVari. I predict you're gonna be very, very happy indeed.
The Pro Rings (beauty rings) that I have (from Bomb Vapor) fit quite loosely and do not obstruct airflow with my 22mm IBTanks. By loosely, I mean they can be spun around easily, and can be lifted up about 2 mm off of the Provari with your finger if the tank is not screwed on real snug. I see this as a good thing, because it allows air space. (Sorry, no pics of these yet other than the ones with the AGA RBA's earlier in this thread)
I didn't see any Pro Rings on that site. If the rings can be lifted, do they not bobble around? I already have a 22mm IBT coming. I suppose I could apply the "loose" tank technique with my KirF rings.
Yes, I just put the air flow control on top of the gr ring, and with the tatroe tank, it has a kind of stepped look, but I kind of prefer a flush look, which I can't get with a tatroe anyway. When I got my rings I tried to take a few pics, but they kept coming out blurry, and now the battery is dead. I will try again when my bat is charged.
Last edited:
Congrats! I'm headed back to the site to pick up some accessories after reading this 
Oh yea, I forgot about them, I got those from vaporev, a while back, I think I got those, around the time, I got my GR rings. They just don't match quite right, with the tatroe tanks, but I still like them. I will most likely use these tips on the Kayfun lite when I get it.
I got vapor mail today.
The joy of opening the box, and seeing the bubble rap, and my ekowool, wow I got some free stickers.
First was my extra o-rings and screws and insulators, and next the Kayfun lite.
Ah, the joy of new stuff, well that's strange wouldn't let me put up my last pics.
well I tried again still wont let me post the rest, I built a coil with 32 g kanthal and the ekowool,
and got a 1.7 ohm coil, so far vapes great.
The joy of opening the box, and seeing the bubble rap, and my ekowool, wow I got some free stickers.
First was my extra o-rings and screws and insulators, and next the Kayfun lite.
Ah, the joy of new stuff, well that's strange wouldn't let me put up my last pics.
well I tried again still wont let me post the rest, I built a coil with 32 g kanthal and the ekowool,
and got a 1.7 ohm coil, so far vapes great.
Last edited:
The rest of the pics.
I really like the look with the hippo, it looks better than my tatroe's
I really like the look with the hippo, it looks better than my tatroe's
I am starting to worry, been waiting 1 week as of tomorrow, the pending charge on my card is gone, but my order on the site still says processing. My order was placed at 12:04 PM last friday, and no shipping notice, and tracking number. I e-mailed them on tuesday and they said it would ship wednesday or thursday. When I got no e-mail today, I sent another message, and they said it should ship on thursday, I replyed back that it is thursday, with no response.
Stressful.... I just went through the same scenario, ordered last weekend, checked my email and my ProVape account incessantly. Just got confirmation of shipment today. I bet yours will go out tomorrow.
I know but a week? I mean I know I got in before all the polished sold out, but I guess if some how because of the whole verification thing, I missed it, I guess that would be fine, just send me the satin mini, and the rest when they get the polished back in stock.
I just want another one, so I can put away these evics!
I just want another one, so I can put away these evics!
- Status
Similar threads
