I love the holes!!!

[Ma'am]

And I LOVE the tank too! This set up is awesome, a great tank with absolutely NO leaking and looks fabulous on my Buzz, is a piece of cake to fill.

I've got other tanks but Notcigs tank is the bomb! Trying to pull the top off and putting it back on to refill was tricky at times. Either I ended up with too much juice in the tank and when I popped the top back on, it flooded the carto giving it a very stiff and yucky draw. Or, I struggled getting the top off and everything came off leaving me with a mess.

I have to admit, I wasn't keen on the screw sticking out the side of my tank, just didn't look right to me. But with the screw on the upper part of the tank close to the cap, it works and I really don't notice it. Matter of fact, I wouldn't trade this one for one without the screw because it makes refilling sooooooooo easy and FAST!

Just take the screw out, refill using the syringe that Mike offers and all is said and done in less than 30 seconds with NO mess or fuss! No more pulling the drip tip off, uncapping very carefully the top of the tank, recentering the carto, and repeating the process in reverse to reassemble the tank.

This has made things so much easier for me and it is very nice looking on my Buzz.........win win again Mike!

Anyone thinking of getting a tank or has had issues like mine, I highly recommend this tank! It's flipping great!!

 

[908Tracy]

Woot woot!!! Great to hear Ma'am, as I've ordered one as well with my Buzz. The hole is what drew me to this tank above the others out there. I'm a tank virgin though, so....lol

Cannot wait (but still doing so patiently) to get it and get my Buzz On!!!!

Thanks for the review, I appreciate it.

 

[Vermonster13]

Glad you like it.

 

[FranC]

I find it easy to remove the top cap on my aluminum liquinator but not the delrin one.

 

[5cardstud]

I'm with you Ma'am. I can fill the M1A1 faster and way easier than I can tearing the tank apart to fill and it keeps a better seal if the ends aren't taken off and on with each fill. That's why I put a port on my other tanks.

 

[Bovinia]

I'm with yall on this...I love the fill hole on the M1!

 

[Vermonster13]

Amazing how a simple idea can make something so much better.

 

[Ma'am]

Amazing how a simple idea can make something so much better.

Yes it is!

I have other tanks, aluminum and stainless caps and both give me the same issues. As was mentioned above, repeated removal of the caps does make them slippery on the cartos.

With the M1, this baby doesn't have to be broken down til I'm ready to replace the carto. At that point, I can clean it good, put in a new carto and be on my way with ease again.

 

[Ma'am]

Woot woot!!! Great to hear Ma'am, as I've ordered one as well with my Buzz. The hole is what drew me to this tank above the others out there. I'm a tank virgin though, so....lol

Cannot wait (but still doing so patiently) to get it and get my Buzz On!!!!

Thanks for the review, I appreciate it.

You'll LOVE it Tracy!

 

[FranC]

Haven't had a single probelm with my Al tank. Maybe I'll have to try a M1A1 but the screw's been a turn-off.

 

[Ma'am]

Haven't had a single probelm with my Al tank. Maybe I'll have to try a M1A1 but the screw's been a turn-off.

Honestly, it was for me too, that's why I didn't purchase it right off the bat. But after having to rip apart another tank because I flooded the carto, I decided that I could live with the screw. LOL

I hate big drip tips, I don't like the large tanks either so again, the screw was a turn off but now that I have it, it really doesn't look like I thought it would. Seeing it on the site empty really doesn't do it justice, it is all you notice. But when you get the carto in, fill it with juice it looks like a small button.

The screw on mine is positioned directly above the fire button on my Buzz. I use my thumb to hit the fire button (button is faced towards the ground when I do this) and I cannot see the screw when I'm holding it up to my face.

With the hole in the tank tube, I'm able to fill that sucker up, that's a huge plus too! With my other tanks I had to leave at least a quarter of the tank empty so when I pushed the top cap on after filling, juice wouldn't be as apt to flood my carto but that didn't always work either.

If you get a M1 Fran and decide you don't love it, I'd buy it off of you........that's how much I love it!

 

[FranC]

Might take you up on that.

 

[Modrod.]

Might take you up on that.

If you use XL carto's I'll give you mine. It's the 1.5" one so it only works with longer carto's. Of course, you could always trim off a half inch.

 

[FranC]

So Mod you don't like it?

 

[Modrod.]

So Mod you don't like it?

I just don't use it much. I have another tank that's designed to use clearomizers, which is what I use the most. The M1 is better suited for filler carto's which I don't use anymore.

 

[FranC]

OK thanks. Snowing harder now.

 

[5cardstud]

Yes that screw can be trimmed down a lot. My other tank has a very small screw in it but of coarse I have to use a screw driver to remove it but I'm right by it so that's no biggy. I have ports in all my tanks now. I have a thing that let's me fill my syringe just like the do when filling medicine from a bottle so I don't have to even come into contact with the juice. I can do the whole procedure in under 2 minutes. Actually closer to one. I'm like you ladies though, at first that big screw was a turn off but not any more. I am going to trim it today though.

 

[FranC]

I'll bite. How do you trim down a screw?

 

[5cardstud]

I'll bite. How do you trim down a screw?

There are many ways but this one is plastic so I'll probably just sand it down to a shorter knob on it and probably shape it oblong like the winder on a music box.

 

[FranC]

Ah you're getting technical now.