IClear30 vs. Pro Tank 2

[42volts]

Recently picked up a Kanger Pro Tank 2. I got a variable voltage mod, and curious how to get good vape from the pro tank. Using the same juice in both tanks I find I get more flavor out of the pro tank, but better vape out of the IClear. Currently running a coffee flavour. Could be the juice?

For those that have or have used the Pro Tank 2, what voltage / watts have you been running it at?

Thanks for the insight

 

[Ralence]

It also has to do with top wick versus bottom coil setup. I run the protank at about 4.2v, but it depends on juice itself. Start cranking it up a little at a time until it tastes a little burnt, then go down 1 step. Juice will definitely effect what voltage you use.

 

[Baditude]

Using the same juice in both tanks I find I get more flavor out of the pro tank, but better vape out of the IClear.

It also has to do with top wick versus bottom coil setup. I run the protank at about 4.2v, but it depends on juice itself. Start cranking it up a little at a time until it tastes a little burnt, then go down 1 step. Juice will definitely effect what voltage you use.

The iClear 30 also has two heating coils (dual coil) with 16 wicks. 2 coils + 16 wicks = more juice vaporized = more vapor.

 

[UncHellMatt]

I use the iClear with much thicker, dark juice, such as chocolates, as they cake up much, much faster on the ProTanks.

Personally I use the ProTank more frequently, because I can use any juice I want in them, including ones like MBV "Thug Juice" and "Lightening", and I can rebuild the heads myself. BUT, I've found I get a lot more use out of an iClear 30 head with said darker juices. Usually the most I get vaping something like Mom n' Pop's "Grasshopper" in a ProTank is about 2 days before I have to replace the head, while I can go easily double that on an iClear.

And the ProTank heads are cheap. You can find them in a pack of 5 for six bucks, and I can generally replace the wick several times before the little rubber stopper starts to look a bit mangy.

 

[aznzing03]

What ohm are the heads that you are using with the Protank?

The others have pretty much nailed it on the head.

I do prefer my Protank 2 however as I do like the "air-er" draw. After rebuilding the head I enjoy it much more than the iClear30.