Iluvthearmy

[salemgold]

Hmmm... wouldn't it be the same as any belt width?

 

[FranC]

I don't think so. Belts come come in all different widths.

 

[markfm]

Good question, for instance a web belt might be 1.25"

 

[5cardstud]

I believe they're just shy of 1.5 in. The one I have is anyway. It's one of those cloth belts.

 

[leannebug]

Thanks guys! I think I'll go with 1.5 just to be on the safe side.

Belts come in many different shapes, styles, and sizes- but the military (if I'm not mistaken) uses 'standardized' sizes for things. That way everything will fit together.

On another note: if anyone has his APO addy- can you please PM me the info? I picked up the proper paperwork from the PO

Thanks again. Y'all rock!
(((hugs)))


Sent from the beach

 

[BuzzKill]

That is very cool of you LB !!

 

[Ruppy]

FYI Military issue uniform belt is 1.25". 1.5 will work fine.

 

[candy_93454]

thank you for all your hard work you are in our thoughts and prayers on this and every 4th of July!!

 

[leannebug]

Thanks ruppy!!



Sent from the beach

 

[5cardstud]

Ya mine was about 1.357348745254in. so I thought 1.5 in. would fit good. If you get things too tight they are a behotch to get on.

 

[salemgold]

I was thinking that it would be safer to err on the big side and it would not be bad if it were a little loose

 

[5cardstud]

I was thinking that it would be safer to err on the big side and it would not be bad if it were a little loose

+1 Especially the way they change things all the time. I think if I was doing it I would just sew a strip of Velcro on it then it could be adjusted to many sized belts.

 

[Iluvthearmy]

hey,got my internet back but I gotta get to work. salem the address I gave you is right except you have to put camp marmal as the city.found that out when I gotta call at our company from RC north mail clerk hundreds of miles away to see if it was me some letters were searching for. I'll see yall later.

 

[5cardstud]

Cool. HI ARMY.

 

[leannebug]

+1 Especially the way they change things all the time. I think if I was doing it I would just sew a strip of Velcro on it then it could be adjusted to many sized belts.

Cool. This will more than fit a belt that is 1.5- I think a Velcro belt loop wouldn't be as secure. Can't have ol' Betsy falling in the dust!
The holder itself is pretty snug. (using my glv and sb as stand-INS.) No worries about it falling out. I was checking the pic and vids for the button placement. I don't want it so snug that it misfires. Where is it??
Also, the measurements I got from Salem are 4.5 in legnth (with an adapter). Is that right? Anyone know if he uses atty, dt, carto.. Etc? In order to have the Velcro at the top, I really need the total legnth. I've got the parts, if anyone can clue me in on the proper gear to measure!

Thanks all!!

(it's kinda primitive. I've had to do a little hand stitching, since I'm not at home ATM, but after he gets it, I can always make another with any changes that become appearant. )



Sent from the beach

 

[Iluvthearmy]

HEY 5CARD

don't worry about looks leannebug primitive is good, especially with as much wear and tear that is bound to happen out here. As far as attys I use XL size cartos and GPSSR tanks (about the same size as the map tanks). Mostly the tanks because i hate to carry extra juice in this heat.

 

[tyleris12]

Glad to hear the tanks are working so good for you!! Hope all is well and take care

 

[leannebug]

Thanks ILTA!

Hey Buzz.. or anyone: where is the button on his model? Is it on the side? (looked like the top side on the vids I watched) Does it stick out much?


TIA!!!!

 

[Wharf Rat]

L'bug I don't have mine with me at the moment but it is on the side about 1/2" down and somewhat recessed. Here's pics of Mist's (beautiful) veneer, the 1st and 3rd pics shows the position of the button.

http://www.e-cigarette-forum.com/forum/notcigs/199008-super-nice-mist-buzz-pro-veneer-pix.html

 

[leannebug]

Ty wharf! I'm guessing they are all the same then? No revisions?

Sent from the beach