I'm confused :(

[Medo Hassan]

I want Advice from the Experts

I have BEC PRO 50w , And I want change to box mod

i compare between ( sigelei mini 30w - high wattage box mod & ipv mini 30w & Xpro m65)

[h=1]Which is better[/h][h=1][/h]

 

[BoomerFZ1]

I have an IPV Mini and there is NOTHING "mini" about it. Great device otherwise but it's my coffee table vape due to its sheer heft. I just ordered the eLeaf iStick 30w and I'd take it over any of the one's you listed. I have the 20w version and the size is just perfect for vaping on the go. The 30w just addresses some of the issues folks had with the 20w version and it's pretty much the same size.

 

[Kloudz]

Or the ipv3 which will give you a 150watts. Which should last you a great deal of time and leave you will lots of room to grow before needing another mod.
Or you could look into the new Istick 50w device for 50 bucks.

 

[sparkky1]

Sigelei 50W v2 Box Mod - Eciggity

 

[Medo Hassan]

Sigelei 50W v2 Box Mod - Eciggity

I think the 50 Watt on 1 battery this an imaginary
. Because one battery can not run 50 Watt

 

[Susan~S]

I think the 50 Watt on 1 battery this an imaginary
. Because one battery can not run 50 Watt

Yes, it can. Basically the chip takes in power from the battery and stores it in a capacitor. When the stored energy reaches the potential (voltage) it dumps out to the atty.

Buck-Boost Converter

 

[InTheShade]

I think the 50 Watt on 1 battery this an imaginary
. Because one battery can not run 50 Watt

Think about it, on a mechanical running a super low build you can push 120 watts into a 0.15 resistance coil with one 18650 battery.

You're not going to get a tremendous amount of battery life I'll admit...

 

[sparkky1]

I would not steer you wrong my friend....

 

[sparkky1]

He was talking about running not MAH

 

[RandyF]

Sigelei 50W v2 Box Mod - Eciggity

This one or the IPV2s 70 watt, do not get the SMOK xPRO!!

 

[Medo Hassan]

Yes, it can. Basically the chip takes in power from the battery and stores it in a capacitor. When the stored energy reaches the potential (voltage) it dumps out to the atty.

Buck-Boost Converter

i have 2 battery ( panasonic 3100mah ) & ( efest 35A )
this both can not run over 25w

 

[InTheShade]

He was talking about running not MAH

Who was? me?

I'm confused. If you quote the post we know who you are addressing.

 

[RandyF]

i have 2 battery ( panasonic 3100mah ) & ( efest 35A )
this both can not run over 25w

Yes, they can. You are talking about Amps. 105 WATTS will pull 25 AMPS from your battery.

 

[Medo Hassan]

Think about it, on a mechanical running a super low build you can push 120 watts into a 0.15 resistance coil with one 18650 battery.

You're not going to get a tremendous amount of battery life I'll admit...

efest 35A was working on the 35 Watt in the first week only

 

[RandyF]

efest 35A was working on the 35 Watt in the first week only

Batteries are limited my their amperage, wattage is the measurement of power the battery can produce within that amperage. I think I explained that right, regardless, batteries are not limited my wattage.

 

[Medo Hassan]

i mean any mod 50w or over, need two battery to running well at 40w or higher

 

[Medo Hassan]

I think any mod 50w runs on one battery is fake, because can not up to 40w or 50w with one battery

 

[RandyF]

i mean any mod 50w or over, need two battery to running well at 40w or higher

No, they do not need 2 batteries. The need for dual batteries in high wattage mods is longer battery life (more mah, so 5000 instead of just 2500). One will work fine, you will just need to charge sooner.

 

[Vatigu]

This one or the IPV2s 70 watt, do not get the SMOK xPRO!!

Just curious as to what you have against the x-pro? And yeah people in this thread really need to research batteries much more deeply...

 

[RandyF]

Just curious as to what you have against the x-pro? And yeah people in this thread really need to research batteries much more deeply...

I saw a couple reviews on it and the design is awful. In one of the reviews the screen pushed in as you pressed the fire button, the USB is flimsy, the battery does not slide out and the way the top cover is attached, it will only be a matter of time before juice leaks down through the gaps.