Indulgence Mod Question

[SIC08869]

Hi all I just received my first mod, the Indulgence V3. Turns out that there are two versions, mine is the 3.7 version without vent holes. Does anyone have any advice on the best way to drill the vent holes in the bottom of the cap? I really don't want to mess up my first mod.

 

[Sicarius]

I would use a centre punch and a 2mm drill bit.

It looks like they releasing V4 soon - VV

 

[SIC08869]

Thank you for the information, Sicarius!

 

[Sicarius]

Three holes seems overkill. ProVari has one like most mods.

RIVA will release new MOD E-Cigarette Indulgence V4, which has Various Voltage Switchable

Model number: Riva Indulgence V4

Features:
Various Voltage switchable from 3V to 6V
Battery power capacity :1700mA
Big buttons, safe and reliable, nice control feelings
Power on/off switchable.
Keep stable working voltage you select with each puff - regardless of your remaining battery
power level. As the battery drains, the device will keep the voltage consistent.
If the activation button is held down for 10 seconds or longer, the unit will shut itself off until the button is released.
Short-Circuit Protection in atomizer
Self-protection against wrong battery installation.
Self-detecting/Over-Discharge Protection – Device should self-detect the battery voltage and automatically turn off once full-charge to prevent battery discharging.
Amperage Limited to 2.5 amps
The device should shut itself off if it detects any excessive over-current conditions.
Vent hole on the bottom of the device to improve safety

User instructions:
Button + -
Press +, Voltage increase from 3V to 6V. After 6V, it will return to be 3V
Press -, Voltage decrease from 6V to 3V. After 3V, it will return to be 6V
Press and hold both buttons +- for five seconds to disable the voltage switching function
Power on/off button
Press and hold power button for 5 seconds to turn on/off

Schedule:
electronic ready in Mid Jan
Tooling ready in End Jan
PP in mid Feb
MP in end Feb

Lets hope they learn from LavaTube

 

[Retriever]

Sounds like it might be a good mod coming soon!

 

[SIC08869]

wow looks nice!

 

[txtumbleweed]

wow looks nice!

Where did you see a picture of it? I was trying to find some info on it but so far I can't find any.

 

[Sicarius]

No pictures yet, just the specification.

Imagine a Lavatube ... only prettier

 

[nordoe]

Hi all I just received my first mod, the Indulgence V3. Turns out that there are two versions, mine is the 3.7 version without vent holes. Does anyone have any advice on the best way to drill the vent holes in the bottom of the cap? I really don't want to mess up my first mod.

On the V3 there is really only one version. The only difference between the regular and the high volt is the batteries and atomizer that come with the mod. I had both, they both broke in under a week. The buttons were weak and it had to be returned. I really liked the look and feel of it, but with no power its no good.

 

[stealfdawg]

On the V3 there is really only one version. The only difference between the regular and the high volt is the batteries and atomizer that come with the mod. I had both, they both broke in under a week. The buttons were weak and it had to be returned. I really liked the look and feel of it, but with no power its no good.

MINE DID TOO I am happier with my e power 3.7v 14650 (my exchange) any other MOD I have I will build my self !!