Indulgence Mt-Rta
- Thread starter 98ruby
- Start date
- th_trl_thread_readers 0
- Status
Good morning guys and gals,
Just fit a 3mm id 8 wrap 2x26/36 fused into the v deck. Still some adjusting to do to fire evenly across the coils though .
Just fit a 3mm id 8 wrap 2x26/36 fused into the v deck. Still some adjusting to do to fire evenly across the coils though .
That's really close to touching, but I know that build is going to take some wattage and rip huge clouds and great flavor[emoji106]
Sent from my Nexus 6 using Tapatalk
Ok, I got the RX200 out of the box, and I have one set of batteries charged, I am (pleasantly) surprised by how small it it, but I should have known from the pics/comment in the thread. Mine is black, from Vapenw. The hardware is 1.04, and I just updated to 1.08 firmware. It was 1.07 in the box. I am about to put some batteries in it and fire this bad boy up. Fortunately, I built an MT SS316 last night, dual parallel 26ga, .11 ohms. It's presently sitting on my Koopor Plus. Just about amazing how much smaller the new one is. And another battery, too. Go figger, huh?
Indulgence Mutation X MT-RTA Black/Clear O-Ring Kit
I saw it at Vape royalty a while back. Comes with clear too.
Indeed they are. Having trouble with the grubs pushing one of the leads out a lil but got a bit more gap then before now. On to wicking this one haha.
Hopefully the wicking will keep up with it. I'd have to run a gang of wattage to those, hell they are bigger then the ones in my rda lol
Sent from my Nexus 6 using Tapatalk
Sent from my Nexus 6 using Tapatalk
OK, now I've broken it, lol. I can't get it to shift out of VW mode and into TC SS. It will move to TC Ni, but not on from there, and then it pops back to VW.
That's weird, I'd like to try temp control with the stainless Clapton but I have no clue how to set it up for a good Vape.
Anyone willing to help? I see you can lower or raise the wattage as well as the temp. I've got it in a troll rda, 24g core with 28g outer 3mm id 5 wraps at .13 ohms.
I have no idea what to do here guys lol
Sent from my Nexus 6 using Tapatalk
Anyone willing to help? I see you can lower or raise the wattage as well as the temp. I've got it in a troll rda, 24g core with 28g outer 3mm id 5 wraps at .13 ohms.
I have no idea what to do here guys lol
Sent from my Nexus 6 using Tapatalk
Last edited:
Sweet! 450 Degrees, 60 Watts. Beauty and Beast. I love it all to pieces 
Lol, forgot the pic:
![20160109_111615[1].jpg](https://www.e-cigarette-forum.com/attachments/20160109_111615-1-jpg.521208/ "20160109_111615[1].jpg")
Lol, forgot the pic:
Coming at at .25 and working at the same 50w i run the gv2 on my 3li. Giving the wick a sec to get good and soaked then on to taking a pull on her
It's on the RX, right? In power on mode, three clicks of the fire button toggles TCNi, TCTi, TCSS, VW. Set it in TCSS mode. In TCSS mode, up/dn buttons to set the temp. I suggest you start about 450 degrees F, adjusting thereafter for the temp/cloud you want. In TC(any) mode, 4 clicks of the fire button gives you the menu to use up/dn buttons to set watts. SOmewhere between 40-100 is probably where you want to be. High enough to not have long ramp time, not so it it blows you up like a balloon. Then vape on, my friend. You can hold up/dn together to lock the adjustment where you want it.
Holy crap man I'm gonna have to grab another one of these. That build wont even come close to fitting in gv2 and with this tank is blowing that one out of the water haha. Runs at 50w but have at 88 atm and I do believe I'll have to dropdown in nic and flavor percentages on my next batch of juice. 
is how I feel right now sure haha!!!!
is how I feel right now sure haha!!!!
Do I have to build a spaced coil with this SS wire? At 450F and 50watts it says temp protection damn near instantly
Sent from my Nexus 6 using Tapatalk
No idea. I didn't. "Temp Protection" is not a bad thing. It just means the wire is at your set temp and being held there, and therefore you aren't applying all 50 watts any more.
- Status
