Indulgence Mt-Rta

[BeerGolfClouds]

Forgot to mention...first thing I did, even before cleaning it, was drill a hole opposite the fill port. The biggest flaw I saw in the design is fixed. Now to find a nice, fat delrin drip tip to cap it off, then I'll be in hog heaven. The stock tip is a tad short for my liking. Otherwise, this tank rocks.

 

[ThunderDan]

Forgot to mention...first thing I did, even before cleaning it, was drill a hole opposite the fill port. The biggest flaw I saw in the design is fixed. Now to find a nice, fat delrin drip tip to cap it off, then I'll be in hog heaven. The stock tip is a tad short for my liking. Otherwise, this tank rocks.

Yep, the stock drip tip is too short, and too edgy, if that makes sense.

 

[T0mmy1977]

Likey U.S. vendor! Got some Koh Gen Do from Japan took like two weeks!

But you can get enough to last a year for like $30

 

[suprtrkr]

Forgot to mention...first thing I did, even before cleaning it, was drill a hole opposite the fill port. The biggest flaw I saw in the design is fixed. Now to find a nice, fat delrin drip tip to cap it off, then I'll be in hog heaven. The stock tip is a tad short for my liking. Otherwise, this tank rocks.

I keep reading this, but I honestly don't have an issue with it. I fill with a unicorn bottle, and there's plenty of room or air to escape. YMMV, of course.

 

[Bman123]

I keep reading this, but I honestly don't have an issue with it. I fill with a unicorn bottle, and there's plenty of room or air to escape. YMMV, of course.

I've never had a issue either when using a unicorn bottle. I got the mutank now so I've got air holes on both sides

Sent from my Nexus 6 using Tapatalk

 

[roxynoodle]

Marc drilled an extra hole in Satan, but I haven't had any trouble with my others.

 

[Landman]

I was thinking a Boxer if/whenever they update it to the SX350J v2, that one looks good with 30mm atties. Or as @Bman123 pointed out, any Hammond B box type mod would work too. I could make a 20A raptor in a B box pretty cheap.


@MMW you're right, it doesn't look bad, it looks terrible.

The Boxer handles the 30mm atties just fine... with a tank that heavy, it makes me miss the weight of the Reuleaux though.


I tried to hold out and resist this MT/Mutank but couldn't help it when the black Mutank dropped... ordered a couple from vapordna and got some v decks too. Can't resist the shiny.

 

[JimScotty0]

Forgot to mention...first thing I did, even before cleaning it, was drill a hole opposite the fill port. The biggest flaw I saw in the design is fixed. Now to find a nice, fat delrin drip tip to cap it off, then I'll be in hog heaven. The stock tip is a tad short for my liking. Otherwise, this tank rocks.

Yep, I did that too last week with a 3/32" bit. Great improvement in filling so now any tips work.

 

[kushpancake]

Anyone else have an issue with the glass freely spinning on this?

yup!

 

[kushpancake]

Cotton Bacon.....10 strips cut in half for 20 pieces, 10 wicks per piece for 200 wicks for 5 bucks, had reward points and a coupon code for 20% off, bought four for 13 bucks and change. 200 x 4 = 800 wicks / 5 - 6 wicks a week = about 3 1/2 years of cotton lol


Sent from my iPad using Tapatalk

cotton bacon is ....! (only thing i use now) I'm tired of supporting the .... and chinese when we should be supporting our own country.

 

[MMW]

I was at a meeting last night and I looked down at my coffee.

 

[haleysdadda]

OK so I've got a question! Does my RX200 have 9000mah or 3000mah with my HG2s?

 

[GccTxs67]

OK so I've got a question! Does my RX200 have 9000mah or 3000mah with my HG2s?

9000

3000 X 3 = 9000

 

[Bman123]

OK so I've got a question! Does my RX200 have 9000mah or 3000mah with my HG2s?

The batteries last all day for me at 90-120 watts. I'd change the batteries at least twice in my sigelei 150 watt with Samsung 25r's at the same wattage.

Sent from my Nexus 6 using Tapatalk

 

[haleysdadda]

The batteries last all day for me at 90-120 watts. I'd change the batteries at least twice in my sigelei 150 watt with Samsung 25r's at the same wattage.

Sent from my Nexus 6 using Tapatalk

So 1.5-2days at 60w is good?

 

[suprtrkr]

9000 is correct. And a nominal 11.1 volts.

 

[Bman123]

So 1.5-2days at 60w is good?

It should last that long for sure. I hope you like your mod, I love mine

Sent from my Nexus 6 using Tapatalk

 

[ThunderDan]

9000 is correct. And a nominal 11.1 volts.

That is not correct actually. Three 3000 mAh batteries in series is still just 3000 mah.

As you pointed out because they are in series the nominal voltage is 11.1v, so it is effectively the same thing as 9000mah at 3.7v (nominal voltage) considering Watt hours.

3000mAh * 11.1V / 1000 = 33.3Wh
9000mAh * 3.7V / 1000 = 33.3Wh

 

[suprtrkr]

That is not correct actually. Three 3000 mAh batteries in series is still just 3000 mah.

As you pointed out because they are in series the nominal voltage is 11.1v, so it is effectively the same thing as 9000mah at 3.7v (nominal voltage) considering Watt hours.

3000mAh * 11.1V / 1000 = 33.3Wh
9000mAh * 3.7V / 1000 = 33.3Wh

obviously. But mAh is a measure of current capacity, while Wh is a measure of power. As your equations point out, both configurations will deliver both the same total ampacity and wattage. But 3x voltage will deliver it (assuming the same resistance) in 1/3 time. This is true because 3kmAh@11.1v=9kmAh@3.7v.

 

[GccTxs67]

Speaking of batteries, my new Nitecore D4 and 4 new LG HG2s arrived today.....how long should it take for this to charge 4 batteries from nearly dead?


Sent from my iPad using Tapatalk