Wish I could help you with that but I went with goliath v2 over the tf because I didnt like the looks of the build decks avail when it was released.
Indulgence Mt-Rta
- Thread starter 98ruby
- Start date
- th_trl_thread_readers 0
- Status
Wish I could help you with that but I went with goliath v2 over the tf because I didnt like the looks of the build decks avail when it was released.
I had toyed with the idea of the TFV4 for awhile, but that vanished after finding the MT. I am still thinking about a Mutank, but maybe the RDTA one with the rebuildable V deck. I'm not interested in the replaceable prebuilt coils at all.
Curious thing. I had my MT on my Clouper and running at 80W and was doing fine. But when I put it on my RX, I got a hot, almost burning type taste trying to run it at the same wattage. I had to turn the RX down to 60W to use it. Why would that be? Is it possible the Clouper isn't really putting out what it says? It sure seems to me that it should vape the same with the same settings. Anyone else have this issue?
Curious thing. I had my MT on my Clouper and running at 80W and was doing fine. But when I put it on my RX, I got a hot, almost burning type taste trying to run it at the same wattage. I had to turn the RX down to 60W to use it. Why would that be? Is it possible the Clouper isn't really putting out what it says? It sure seems to me that it should vape the same with the same settings. Anyone else have this issue?
Those Clouper mods were terribly inaccurate. I remember reading the T8 "150W" mod would only do like 60W at 150W, or something like that.
I noticed a similar effect when trying my gv2 on the rx. I use that tank 50w on 3li so tried it on the rx at the same wattage. It woke it right on up to say the least but no burnt hits. If it wasnt for my gf being so " you have enough you dont need more" I'd be grabbing 2 more rx to replace my 3li and reg 3.
I figured it had to be some inaccuracy there. I had the MT on the RX but put it on the Clouper as I wanted to run that monster 30mm tank on the RX. I had to crank up the wattage a lot on the Clouper. Well, what do you expect. It was cheap and it will be used at higher wattage until I can get a second RX.
Has anyone used cucumber flavorings? Read a couple of places to add a little to watermelon to give a bit of rind/seed flavor.
Haha that the excuse I'm trying to use to buy 2 more rx "But dear they are cheap compared to our other mods and outperform them at that". Dont get me wrong I like my ipv's but the extra battery does make a difference.
That it does, my b-day present last year was a sig75tc. It saw maybe 3 weeks of use then just kinda became a nightstand wart.
I have a Clouper mini 50W and that thing just sits, too. Not enough oomph to make me happy 
. I wouldn't be able to function using a DNA40 or anything that low powered.
. I wouldn't be able to function using a DNA40 or anything that low powered.I have a Clouper mini 50W and that thing just sits, too. Not enough oomph to make me happy
At first that mod let me resurrect my stm. But after being on the gv2 the stm just wasnt enough no matter how I built it.
Trying to decide between cap cucumber and tfa cucumber to try in this concoction...
I dunno, I still use my DNA40s for some RTAs I build with 26g, or 28g, where 30-40W is plenty, my Goblin Mini sits on my Hana One and is lovely around 35W. RDAs is another story though, but I generally don't do TC builds.I have a Clouper mini 50W and that thing just sits, too. Not enough oomph to make me happy
Using Kanthal coils, I can get by with 40 watts if I build in the .3ish range. I find SS in TC mode wants more power.
thanks, Dan. We'll do the Mutank instead. I'd like to try the Ohmega Alpha, but I can't get one.
In case you guys missed it, I know there are a lot of RX200 users here:
"Based on the previous TC-SS mode, Wismec develops the new TC-SS316 mode in the upgraded firmware V3.00. Moreover, the customized TCR mode are also introduced.
TCR(Temperature Coefficient of Resistance), users can set the parameters according to the TCR of coil in this mode.
Through this upgrade, the accuracy of temperature control is greatly improved and the pleasure of vaping will be naturally enhanced. "
Reuleaux RX200 - Wismec Electronics Co.,Ltd
"Based on the previous TC-SS mode, Wismec develops the new TC-SS316 mode in the upgraded firmware V3.00. Moreover, the customized TCR mode are also introduced.
TCR(Temperature Coefficient of Resistance), users can set the parameters according to the TCR of coil in this mode.
Through this upgrade, the accuracy of temperature control is greatly improved and the pleasure of vaping will be naturally enhanced. "
Reuleaux RX200 - Wismec Electronics Co.,Ltd
About the only time I use kanthal is for flat bas now. I've come to prefer the flavor off nicr over kanthal.
Cool, havent used tc on mine yet but nice to see they did what they said they would for those that do. I've been tempted to see if this will do nicr in ni200 mode like the sig 75 will though.
nichrome80 doesn't have a great enough change in resistance to really use it effectively with TC mods.
- Status
