Make sure you share pictures of the wedding.
definitely
as soon as i can get my hands on a 701 to 510 drip tip so i can get rid of the ugly delrin whistle tip, mrs infinity aint gonna marry mr bulli looking like that 
Infinity Pro release...
- Thread starter ipetbumblebees
- Start date
- th_trl_thread_readers 0
- Status
definitely
as soon as i can get my hands on a 701 to 510 drip tip so i can get rid of the ugly delrin whistle tip, mrs infinity aint gonna marry mr bulli looking like that ouch! i'd rather spend $10 on phone calls keeping the UK mail on there toes
My original Infinity goes from 3.33 to 6.6V. My Infinity Pro goes from 3.28 to 5.5V. Is that right?
LD
LD
I wasn't around before the Pro came out.
I went off of this post, when I ordered mine, from http://www.e-cigarette-forum.com/forum/notcigs/173244-pro-line-notcigs-pvs.html:
2. Infinity Pro , this is a new improved Infinity same basic look but several improvements
A. New Tube MFG , these will be the same quality as the Buzz tubes
B. New Controller IC , will handle LR attys etc. better low resistance performance .
C. Double Battery life
D. New top cap design , Like the Buzz design ( It should be replaceable like the Buzz )
E, Knurled bottom cap to make removing the battery cap easier .
F. New wheel design , It will have a Red/Wht/Blu lines on it so you can visually see the setting better ( red being hotter etc. )
Either way, I'm not complaining. I was just worried that something may be wrong with the PCB in my Infinity. I knew the Infinity Pro was listed as 3.3 - 5.5V. Just was a little worried about my Infinity. I just got it today. Sweet deal though.
On original infinity, make sure you put the batts in correctly, pretty sure it doesn't have reverse polarity protection.
(i have one, it is a really solid pv, like it a lot)
(i have one, it is a really solid pv, like it a lot)
Yes on the batts !! , the unloaded voltage on the OLD Infinity will go higher but under load it goes to about 6 volts or so .
5.5V is correct on the IPro
I will try to change out the batteries before I start drinking.
No promises though...
Buzz, I think you guys repaired this one, not too long ago. S/N #25.
I will try to change out the batteries before I start drinking.
No promises though...
Buzz, I think you guys repaired this one, not too long ago. S/N #25.
LMAO !! do that bud!!!!
No idea , we may have ??
Now that I have 2, and Infinity and Infinity Pro, the one I like best is... the fact that I have 2!!! ;-)
In my case Infinity and Buzz Pro -- both excellent Running 3 ohm cartos, I don't notice the BP not going quite as high or low in voltage as the original Infinity, since honestly I spend almost all the time between 4.7 and 5.2V
Running 3 ohm cartos, I don't notice the BP not going quite as high or low in voltage as the original Infinity, since honestly I spend almost all the time between 4.7 and 5.2Vi got my ipro today and wow...having used an ego device until now, this thing is absolutely awesome!
i have finally been able to use the vision 2.8 to their full potential. i have also noticed that the boge 2.0 cartos work better at 3.9 volts (for me). they make just a little more sound and gives more vapor while yet retaining the flavor. Are any of you guys unscrewing the bottom cap half a turn inbetween the vapes? this is my first day and i find myself unscrewing it so it doesnt drain battery....what are your thoughts?
i have finally been able to use the vision 2.8 to their full potential. i have also noticed that the boge 2.0 cartos work better at 3.9 volts (for me). they make just a little more sound and gives more vapor while yet retaining the flavor. Are any of you guys unscrewing the bottom cap half a turn inbetween the vapes? this is my first day and i find myself unscrewing it so it doesnt drain battery....what are your thoughts?
2 ohms at 3.9V works out to 7.6W, pretty close to what I use (3.1 ohms, right around 5V, 7.5 - 8.5W range).
I only unscrew the cap over night or for carrying in my pants pocket, where I want to avoid misfires. It's a low power LED, leaving it powered on during the day has a negligible effect on run time.
I only unscrew the cap over night or for carrying in my pants pocket, where I want to avoid misfires. It's a low power LED, leaving it powered on during the day has a negligible effect on run time.
I can't decide which one I like better. I really can't. I'm glad I have both
so damn jealous, but pleased at same time, my chrome infinity hopefully find its way to me soon,
I agree, on the BP (same controller), the Boge 2.0s are good for me at around 4v, but the Boge 3.0s really shine for me at or a little above the yellow mark (4.5-ish).
Too be honest, I don't ever unscrew the bottom cap except to change batts. I've never had it fire accidentally and I keep it in my front pocket all day. Plus, the power consumption is so minuscule it's not really a concern.
I also received my new first ever VV a Black with Chrome IP along with a couple of adapters 510-ego and 510-510 shorties from madvapes. I have plenty of ego stuff I want to try and use up. First off I put on a new Clear eGo Mega Dual Coil Cartomizer 1.6 ohm and filled it up with some Halo Menthol Ice, set the IP between the yellow and green marks and took a couple of puffs and was floored how much vaper filled my space, I actually started to choke, I also have never witnessed this much flavor from this particular juice and it felt warm like the real thing.
The bottom line is I couldn't be any happier with this purchase. I hope this finally gets me off those nasty cig's. I think the IP is the best bang for the buck.
The bottom line is I couldn't be any happier with this purchase. I hope this finally gets me off those nasty cig's. I think the IP is the best bang for the buck.
- Status
