infinity with 510 connection not working with some cartos/ adaptors

[fetasigma]

i love my infinity it is a great device, hiowever i find that it doesnt work with all my 510 cartos. i can use them on another decide so i know they work, just get nothing on my infinity. is this a common problem? any easy fixes?

 

[kellie]

I found that sometimes if you unscrew them alittle it works but I have a Buzz. But worth a try

 

[FranC]

A draw probelm has been common with the 510 Infinity. I've recently returned mine for repair.

 

[fetasigma]

its not a draw problem, i have 2 types of 510 cartos(the ikenvape gold wich work great) and silver boge wich dont work at all(dont fire). the draw and everything is perfect, but my siolve boge just dont work on the infinity. i am switching slowly over all my cartos to the ikenvape so it wont matter for long, but it was just a question so i can get my use out of them..lol

 

[alldayvape]

the connector from the carto is not making contact with the infinity connector.. A modders connectors from avidvaper/madvapes (cheaper) will fix that. Or you can pull up the connector on the infinity. Do at your own risk.

 

[BuzzKill]

ON the ones that do NOT work , pull the center pin of them out a little and they should work , some other devices will push them in a small amount and cause this to happen .

 

[kellie]

Just so everyone knows madvapes now has the modders 510 connector for $2.49

 

[fetasigma]

i will give this a shot when i get home, right now i have my other device wich i think is dying on me

 

[horton]

Kellie.......Is that connector you referred to called "Shorty 510 Extension and Connector"? Wanted to make sure I was looking at the right item. I have quite a few Boge cartos, so being a true Boy Scout, I wanted to be prepared just in case.
Thanks very much.......

 

[fetasigma]

pulling out the center pin did the trick and i am back in buisness, all the cartos work great

 

[Bovinia]

Glad you're back to vape heaven Fet

 

[Wharf Rat]

Hey Feta, it's an easy fix. All you have to do is pul.......................... damn I'm late again.


I need to get a new job.

 

[5cardstud]

Better late than never Wharf and quit using that dirty word on the forum.

 

[fetasigma]

love easy fixes..lol when i get my next one though i think i will get a new tech buzz when they come out

 

[fetasigma]

btw id dint work with all the cartos, some had center pins that didnt want to move, small metal washer as a spacer from an erector set fixed that problem, and no noticeable diffreence in how the unit screws in...now works with them all reguardless

 

[BuzzKill]

Now that is inventive ! just make sure it does not short out ! I have some super small magnets that are disks , these would work also
IF the center pin is steel .

 

[5cardstud]

I thought about that on the ones that were to problematic. I bent a staple into a t and used once.