Status
Not open for further replies.

vmtorres1

Super Member
ECF Veteran
Jun 15, 2015
367
499
46
Has anybody tried a Kanger Genitank on the CF IV? This was something I wasn't factoring in my decision making process.

At the moment I'm using the istick 30. I use the Genitank for my nicotine fix (12mg juice) at 13 - 14 watts on a 1.8 ohm coil.

For my cloud chasing urges, the iSub 0.5 ohm at 20 - 23 watts (3mg nicotine juice). This should fit snug as a bug...


Tapaspoken
 

f1vefour

Vaping Master
ECF Veteran
Dec 3, 2013
6,212
13,535
Emerald Coast
Manufacturers really need to indicate 510 length, I don't know why they haven't. Maybe someone could start a thread with measurements.

Thread created, please help with measurements if you can.

Atomizer 510 Connection Length (Archive) | E-Cigarette Forum

This way someone can say X atomizer fits flush on Y device, they can check the thread to find out X atomizer is shorter than the atomizer they have so it will definitely sit flush on the Y device (vice versa) they are wanting to buy or already have.
 
Last edited:
  • Like
Reactions: gerrymi

CountBoredom

ECF Guru
ECF Veteran
Apr 11, 2014
29,193
53,923
San Diego, CA, USA
Has anybody tried a Kanger Genitank on the CF IV? This was something I wasn't factoring in my decision making process.

At the moment I'm using the iStick 30. I use the Genitank for my nicotine fix (12mg juice) at 13 - 14 watts on a 1.8 ohm coil.

For my cloud chasing urges, the iSub 0.5 ohm at 20 - 23 watts (3mg nicotine juice). This should fit snug as a bug...


Tapaspoken
I haven't used a Genitank, but Aerotanks (which is about the same thing) fit so close to flush that you have to hold it up just so to see the gap on mine.
 
  • Like
Reactions: vmtorres1

Capt.shay

Vaping Master
ECF Veteran
Verified Member
May 10, 2013
3,662
8,189
W. Ma. U.S.A.
  • Like
Reactions: VapieDan

Grrrr

Ultra Member
ECF Veteran
Verified Member
Jan 21, 2013
1,824
5,823
54
San Francisco via Manchester U.K.
that looks like a smoking deal. It says US shipping so.....?????

I haven't heard any scuttlebutt about the green being released at all. I only heard of it in one contest prize list.

I asked about the Green one on their facebook page and George answered, he said both the Green and the Gold would be shipping soon to vendors.
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
I asked about the Green one on their facebook page and George answered, he said both the Green and the Gold would be shipping soon to vendors.

Do you, or does anyone, have a pic of the gold one? I'd love to see the exact color, to see if it would look good with my gold kayfun -- an EHpro, so it's dull, not shiny/polished -- actually looks more like rubbed brass than gold.

Andria
 

Grrrr

Ultra Member
ECF Veteran
Verified Member
Jan 21, 2013
1,824
5,823
54
San Francisco via Manchester U.K.
Do you, or does anyone, have a pic of the gold one? I'd love to see the exact color, to see if it would look good with my gold kayfun -- an EHpro, so it's dull, not shiny/polished -- actually looks more like rubbed brass than gold.

Andria

From their FB page:

11402420_874590162612497_4303320027082383855_o.jpg
11425084_879505315454315_3384820502724520534_o.jpg


BTW this is what George said:

Innokin George Hi, Vendors are preorder the CoolFire IV Green and Gold colors , the vape mail will be send out next week , we will put the vendors list on the social . Thank you !
· June 29 at 9:10pm
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
I see a new CFIV in Andria's future :)

Heh... I do too, but probably not the gold one; it's a much lighter color than the brass-look of my kayfun. I'll probably just get the black one; black goes with everything. ;) (which is also why my first one is silver!) Besides, my gold kayfun looks spiffy on my gun-metal Vamo v2 with the brass Chi You kick ring. :D

Andria
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
I see a new CFIV in Andria's future :)

Heh... I do too, but probably not the gold one; it's a much lighter color than the brass-look of my kayfun. I'll probably just get the black one; black goes with everything. ;) (which is also why my first one is silver!) Besides, my gold kayfun looks spiffy on my gun-metal Vamo v2 with the brass Chi You kick ring. :D

Andria


Actually... I think I'm just going to bide my time, for that white MVP 3 Pro, OR, possibly the white Evic-VT; it's about the lowest-priced TC mod I've seen. Or just wait until the white kbox mini is available as an "express" kit instead of the full kit with the tank I have no use for.

Several options, and I'll just keep checking prices, and see what the 3 of them do; I recently got the 2 iStick30s and the CFIV, plus I do still have perfectly functional Sigelei Zmax and Vamo, so I can't truly call it a "need" -- just a desire for a white mod. :D The TC would actually be pretty useful with this Achilles.

Andria
 
  • Like
Reactions: pufZeppelin

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Actually... I think I'm just going to bide my time, for that white MVP 3 Pro, OR, possibly the white Evic-VT;
it's about the lowest-priced TC mod I've seen.
so I can't truly call it a "need" -- just a desire for a white mod. :D
The TC would actually be pretty useful with this Achilles. Andria


then this is gonna ‘stir’ things up again
TC made simple, cheap, cute…
looks like a nice unit


- iStick TC40W - Battery

- Eleaf iStick 40w TC $29.99 | Vaping Cheap

- iStick TC 40W by Eleaf Temperature Control

:|
 
  • Like
Reactions: gerrymi

Frenchfry1942

Vaping Master
ECF Veteran
Verified Member
Jan 12, 2014
7,459
14,397
I think I got jinxed reading the last few pages. My MVP3.0 is jumping around when reading ohms. I thought I pushed a button the other day, but it has continued. I have not tried to lift the pin because it is fairly new, but I tried different toppers on it and it is rather consistently NOT reading the ohms like two other mods. I have a few Lemos with adjustable 510 pins and they don't seem to help getting an accurate reading from my MVP3.0. They do fine elsewhere.

I tried the toppers on my old MVP2 and they registered there fine. It seems isolated to my MVP3.0. I am wondering if it is a board issue.

Anyway, I am not a techie so I don't know how that would affect other boards within the Innokin line.

Hi all, enjoying reading the about the CFIV frenzy :). Anyway, My MVP3.0 is fine. (whew!) I have a lot of Lemos in my rotation and they just don't seem to connect well. Just never had the problem before.
 

pufZeppelin

Vaping Master
ECF Veteran
Jul 6, 2013
7,610
24,603
Florida, SW
Hi all, enjoying reading the about the CFIV frenzy :).
Anyway, My MVP3.0 is fine. (whew!) I have a lot of Lemos in my rotation and they just don't seem to connect well. Just never had the problem before.


:thumb: glad to hear you got it worked out
not many complaints about the class leading MVP
it'll pound nails, and keep on vaping (normally)...

Vape≈Happy
:evil:
 
  • Like
Reactions: DavidOck
Status
Not open for further replies.

Users who are viewing this thread