MVP Owners Group-into the next generation

[fairweasel2323]

looking for the MVP 3.0 Pro thread?

 

[VapieDan]

looking for the MVP 3.0 Pro thread?

This is it. You have arrived.
MVP Owners Group-into the next generation…

 

[fairweasel2323]

Awesome! I wasnt sure if one sub thread just for 3.0 Pro like other MVPs have on here

 

[CountBoredom]

Awesome! I wasnt sure if one sub thread just for 3.0 Pro like other MVPs have on here

We don't discriminate: all versions are welcome.

 

[pufZeppelin]

looking for the MVP 3.0 Pro thread?

Awesome! I wasnt sure if one sub thread just for 3.0 Pro like other MVPs have on here

Hello welcome inside the club

this is (as titled) MVP the Next GEN
trying to keep up with each version...

the Pro came out, we jumped ALL OVER IT
then that was about it…
it just works, does what it says very well – ‘nuff said…


THEN:
Temp Control came out and blew everyone out of the water...

•4500mah - haha
•60 watts- lol, nice start
•how big ??


So unless Innokin adds magic to what was once their “Flagship” device
it will be just like the little boy that won’t hoe corn…

-

 

[Danbrooks2k]

I had an MVP2 and loved it with a kayfun at 11 watts... loved it so much that I bought a backup MVP2... I never needed the backup... gave it to a friend.

I have purchased 6 MVP 3.0 Pro's from the trade forums all for around 30$ sold them or given them to friends... I have one black one left... I cant part with it... It has always been a bullet proof mod for me... still have my MVP2, and it works perfectly as a phone charger... LOL

I also have the ISUB, ISUB-G and ISUB APEX... all great tanks!

 

[Oregon Linda]

I had an MVP2 and loved it with a kayfun at 11 watts... loved it so much that I bought a backup MVP2... I never needed the backup... gave it to a friend.

I have purchased 6 MVP 3.0 Pro's from the trade forums all for around 30$ sold them or given them to friends... I have one black one left... I cant part with it... It has always been a bullet proof mod for me... still have my MVP2, and it works perfectly as a phone charger... LOL

I also have the ISUB, ISUB-G and ISUB APEX... all great tanks!

Where are these trade forums you keep mentioning? I'd like to get a deal or two myself.

 

[Danbrooks2k]

They are right here at ECF.... the Journey begins!!!!

 

[pufZeppelin]

just in case anyone is interested the MVP 3.0 (60w) is on sale

- Innokin iTaste MVP 3.0 Pro Express Kit | PVS & Mods | VaporBeast

Happy NEW YEAR all

​

 

[Utew]

Still using the very first MVP 2 that I bought eons ago (OK 2 1/2 years isn't quite an eon.) Amazing that it's lasted so long with daily use... just now starting to lock up every now and then.
Ordered an MVP 3.0 Pro from Mt. Baker just today. It's been a long time since I picked up any new vaping hardware. Really looking forward to trying it out.

 

[VapieDan]

If it say "Innokin" it has to be good!

 

[Utew]

If it say "Innokin" it has to be good!

Ha! They've come a long way in a really short amt. of time, so it seems. Honestly haven't done any hardware research for quite a while and I'm amazed at the tech progression.

Which brings me to a question for all of you that are a bit more up-to-date than I am, about the iSub Apex tank. Anyone have an opinion on it? I'm still using my IBtanked carto setup, which has served me well, but now seems a bit dated. Researching hardware has me wanting to try something different. I don't really care about massive clouds of vapor, so I'll probably go with 2.0 Ohm coils, though I'll give the sub-Ohm coils a shot for jollies. Appreciate any thoughts, opinions, suggestions... Thanks

 

[PaulBHC]

There is a subforum now just for Innokin

Innokin Technology

I bought an Apex and not a fan of it but the new Apex 5 and iSub S should be good. The nice thing is that all the iSubs take the same coil and there is now an rba kit.

 

[pufZeppelin]

Which brings me to a question for all of you that are a bit more up-to-date than I am, about the iSub Apex tank. Anyone have an opinion on it? I'm still using my IBtanked carto setup, which has served me well, but now seems a bit dated. Researching hardware has me wanting to try something different. I don't really care about massive clouds of vapor, so I'll probably go with 2.0 Ohm coils, though I'll give the sub-Ohm coils a shot for jollies. Appreciate any thoughts, opinions, suggestions... Thanks

there sure is A LOT of choices out there now !
here's a couple more, cheap easy to use good performers...

eleaf GS air tanks

eGo ONE Tanks by Joyetech

​

good luck, keep asking...

 

[Utew]

Right, Thanks Paul, I should have specified the 5ml Apex as that's the one I'm interested in. What is your dislike of the smaller 3ml version? Smaller window and fogging issue or something else? ...and I'll check out the sub-forum.

 

[Utew]

Thanks Puf, I appreciate the alternatives. Cheers!

 

[ST Dog]

Which brings me to a question for all of you that are a bit more up-to-date than I am, about the iSub Apex tank. Anyone have an opinion on it? I'm still using my IBtanked carto setup, which has served me well, but now seems a bit dated

Fine to check out newer stuff, but don't feel like you have to change either.

If you have something that works for you, why mess with it?

I've tried lots of sub-ohm tanks, atties, etc. Still come back to my T3S and 1.5 ohm coil on a simple mechanical tube mod.

Simple, no fuss, just works. Other stuff is fun for a day or two, but I have plenty of other things to do. So I go back to a faithful setup.

 

[Utew]

Fine to check out newer stuff, but don't feel like you have to change either.

If you have something that works for you, why mess with it?

I've tried lots of sub-ohm tanks, atties, etc. Still come back to my T3S and 1.5 ohm coil on a simple mechanical tube mod.

Simple, no fuss, just works. Other stuff is fun for a day or two, but I have plenty of other things to do. So I go back to a faithful setup.

Yep, been there, done that...and of course you're absolutely correct about sticking with what works. Just have the itch for something new and the time is right as my MVP 2.0 is showing signs of shuffling off to that great e-cig boneyard in the sky.

 

[pufZeppelin]

Yep, been there, done that...and of course you're absolutely correct about sticking with what works. Just have the itch for something new and the time is right
as my MVP 2.0 is showing signs of shuffling off to that great e-cig boneyard in the sky.

this is kinda close to the old MVP 2.0, if that's what ya have in mind...

Innokin CoolFire IV

 

[Utew]

this is kinda close to the old MVP 2.0, if that's what ya have in mind...

Innokin CoolFire IV

Yeah I kind of wish I had seen the CF IV plus before pulling the trigger on the 3.0 Pro, it definitely (the CF IV plus) is a better looking (IMO)boxmod and with the bigger batt, is nearly equal to the 3.0 Pro. But my MVP 3Pro is already on it's way. Even worse, I started drooling after seeing the Disrupter/Innokincell... lol

Update: OK, done drooling over the disrupter... love the concept, seems it needs some work before it comes out of what I would call... beta status. Maybe the TC version will be a more complete device. /rant off

Btw, sorry for taking things OT here.