Order 2117 on 25th of january. I should have serial nr 0204 and it is shipped. Jon does actually respond to E-mails so let`s hope...
Introducing Futura - The Modular DNA 20 APV by NexgenVapor[ISSUE]
- Thread starter LeftCoastVaper
- Start date
- th_trl_thread_readers 0
- Status
My repaired Futura ended up in B.C. over the weekend. Now it just needs to get to Ontario! Hopefully without a wonky top cap
I've been meaning to ask you, did you have to pay duty when you bought your futura?
nice! that's exactly the one I want.... black, 22mm cap, and flat bottom
Arrived today order placed on Jan 27th
Sent from my iPhone using Tapatalk
Actually I have the 510+Ego cap and it's fine - I didn't notice that the adjustment of the center pin *requires* the included Allen wrench (ugh!). Once I made the proper adjustment the KFL+, and every other device I adjust for, sit flush. Been vaping on it for the past week and so far it performs fine. So far, no major issues - just minor gripes.
It's in Ontario!
2014/03/25 20:58 MISSISSAUGA In transit
And typically It'll be at my post office next day AM when I see that!
Oh mighty consciousness beyond the big bang, please provide straight threads in the 510 connection.
2014/03/25 20:58 MISSISSAUGA In transit
And typically It'll be at my post office next day AM when I see that!
Oh mighty consciousness beyond the big bang, please provide straight threads in the 510 connection.
Last edited:
Wich tanks are you guys using on your futuras? I like my KF`s but only for on the go. I mostly use micro`s and cotton and when I push the watts I can`t seem to get a consistent wicking. After say 10 drags, I have to "help" it wicking otherwise it becomes dry-ish. That is even with my provari so nothing over 15. So when I want to do some chainvaping on higher Watts I use something with a juice-control like tha penelope or aqua. I have a Rose coming and just ordered an Estia too. Does anyone have the same problem or are there people who can chainvape a KF at 25 Watts?
I had the same problem at first with KF at watts higher than 15 to 18. I learned less is more when it comes to cotton. I make sure my cotton strands are running the same direction, I don't roll it which compresses it to much, and I use very little. 10 wrap, 28g, 1.57 ID. Now my builds on KFs can do 25 or 30.
Well I'm happy to have my DNA back.. no wonky 510 threads, but that's because it arrived once again with the eGo+510... Rocker switch is perfect now yay!, and the positive pin is connected to the DNA board again yay!. so they fixed the issues which I'm happy about but, still no 510 only, and I asked for a new tube section that got damaged, was willing to pay, but it arrived back with the scraped up tube section again even though they said I could get a new one..
Wish wish wish, so much, that they could get their customer service worked out.
Wish wish wish, so much, that they could get their customer service worked out.
i just cant imagine how frustrated you must be heck i get mad at the drive thru at mcdonalds when my plain cheeseburger is not plain
It's just so frustrating. The APV is a quality device, but the administrative issues they (or he) is having are terrible. They need a person there keeping things on track, keeping a ticket system in place to keep people in line and get things finished in order and in a timely fashion. It could be so easy if they had someone doing customer service/customer relations keeping things in check. But they're killing their image (or have already done so) with the poor communication and the promises that aren't kept..
Still don't have my November 21 order. Was told it was sent nearly 2 weeks ago and that I would get a customs number the next day. No number, with no replies to two friendly emails sent over the last week.
Getting a little fed up at this point.
Getting a little fed up at this point.
Is mine stuck or something??? 
March 20, 2014
Depart USPS Sort Facility
LOS ANGELES, CA 90009
March 20, 2014 , 11:03 pm
Processed through USPS Sort Facility
LOS ANGELES, CA 90009
March 18, 2014 , 7:09 pm
Dispatched to Sort Facility
MILL VALLEY, CA 94941
March 18, 2014 , 2:26 pm
Acceptance
MILL VALLEY, CA 94941
March 20, 2014
Depart USPS Sort Facility
LOS ANGELES, CA 90009
March 20, 2014 , 11:03 pm
Processed through USPS Sort Facility
LOS ANGELES, CA 90009
March 18, 2014 , 7:09 pm
Dispatched to Sort Facility
MILL VALLEY, CA 94941
March 18, 2014 , 2:26 pm
Acceptance
MILL VALLEY, CA 94941
Looks like it just left the "Sort Facility"?Is mine stuck or something???
March 20, 2014
Depart USPS Sort Facility
LOS ANGELES, CA 90009
March 20, 2014 , 11:03 pm
Processed through USPS Sort Facility
LOS ANGELES, CA 90009
March 18, 2014 , 7:09 pm
Dispatched to Sort Facility
MILL VALLEY, CA 94941
March 18, 2014 , 2:26 pm
Acceptance
MILL VALLEY, CA 94941
AT least when living in the US you can follow the progress. Here in EU you just get a customs number as "proove" it did actually ship. And it is possible it takes two weeks to get here but some of you guys ordering after me here in Europe allready received yours so that`s frustrating but I guess I`ll just chill it out for the last weeks and cross the fingers that everything will be sorted. It will probably arrive roughly the same time as my Rose so that`s the atty I wanted to use the futura for anyhow.
Ok, I was actually able to track it with the customs nr. and it says exactly the same as AF241, so shipped the 18th and last I can see is it has left the Sort facility in LA. That is also on the 20th, a week ago now. My guess is next week. I`ll be posting some pictures..
If I can just get a replacement tube section, I'll he happy again. if I can't perhaps I'll find a way to refinish the tube I dunno. I had my Futura fly off the seat in my truck while avoiding being part of a pileup on the highway this winter. It hit the seat frame while flying and chipped a chunk of cerakote off of the PV, as well as scratched it up a bit but the damage was confined to just the 18350 tube section. I've been told twice I could get a new tube section (it's just basic titanium) but so far have been unsuccessful in actually getting my hands on it (I am willing to pay!). I think I might email that other guy and see if I can get some better results!?
- Status
Similar threads
