iPhone variable voltage mod

[UnHoly453]

Nope, it's not done yet, more of a "can it be done" kinda thread...

I have a working first gen iphone in half decent condition and here's what I'm looking to do (if possible).

- Strip the guts (which i can do without destroying it
- remove the actual screen, leaving the shader and glass in tact
- keep all outer buttons in tact
- use all standard parts, with a dna chip to make it a variable device
- put the display behind the glass, where it can show through when changed
- make the home button the fire/change voltage button or IF POSSIBLE have different buttons have different functions such as
- The silent/ring switch as an on off switch such that it would allow/disallow the device to fire
- Volume buttons or power button as the fire button while the home button navigates the menu or use the volume buttons to navigate the menu
- the headphone jack would house the 510 connection


anyway this is a rough rough rough rough 'sketch' at this point, but supposing I could find a viable flat battery, with enough room left to work for the other components to fit in, I think it could be done.


Any thoughts? looking for some pro advice on this one.

 

[UnHoly453]

Remember guys, at the moment this is just an idea, but I'd appreciate any and all input...

 

[jimbalny]

Would be interesting to see. Personally, I would prefer an android but (not meaning to pee in your cornflakes or anything) does it have enough depth for a connector and all these components? A 510 connector's outer diameter is 8.75mm below the lip.

 

[UnHoly453]

Would be interesting to see. Personally, I would prefer an android but (not meaning to pee in your cornflakes or anything) does it have enough depth for a connector and all these components? A 510 connector's outer diameter is 8.75mm below the lip.

yep, it's a little over a centimeter thick.

 

[Rader2146]

Don't bother trying to fit a connector inside. Leave the headphone jack intact and make a stereo-->510 adapter.

 

[UnHoly453]

Don't bother trying to fit a connector inside. Leave the headphone jack intact and make a stereo-->510 adapter.

That'd be a pretty cool idea, doubt that's even possible though.

 

[UnHoly453]

Tuesday bump.....

 

[bzmotoninja83]

I'd like to see some renditions of design.....

Sent from my XT910 using Tapatalk 2

 

[UnHoly453]

well, I have the iphone, but I don't want to start taking it apart until I know for a fact that I can get either a working flat battery for the design, or some ego batteries in series.

 

[bzmotoninja83]

You should be able to put the HTC evo extended battery inside there but, I think you should choose a different phone for size benefits.

Sent from my XT910 using Tapatalk 2

 

[UnHoly453]

You should be able to put the HTC evo extended battery inside there but, I think you should choose a different phone for size benefits.

Sent from my XT910 using Tapatalk 2

well the thing is, I already have this phone readily available, and it's just going to get thrown in a drawer or lost if not used for something.

 

[Skyway]

heh, make an app that fires the atty. Make the picture on the app be a mod you like. I realize that would be some programing but it would be cool.

 

[dnmeboy]

Haha, Ive got a 3g with a dead logic board sitting on my desk. never would have thought to make it an ecig.

 

[bzmotoninja83]

You could use the board from an ego or even a ego twist. The twisty part could reside in the home button part. Or, the home button could hit the switch for the ego board if you use one. If you use the ego board, you could then charge an intrmernal battery, maybe....



(MY NAME IS BILL Z AND I APPROVE THIS MESSAGE)

 

[dnmeboy]

Couldn't you just slap an iphone 4 or 4s battery into it? Not sure which iphone you have to work with but the 4s battery would take up one half or so of the inside of the phone. The 3gs battery is flat and sits on the back side of the phone. I have a disassembled 3g if you internal photographs.

 

[arjhomel00]

Pretty good idea

 

[bzmotoninja83]

If you could manage to utilize the apple charger connector, that would be cool.....



(MY NAME IS BILL Z AND I APPROVE THIS MESSAGE)