Ipro won't fire

[ihartmy510]

So I'm here at the casino and my ipro decided to stop firing. I hit the button and the led turns blue but there's no power going to the carto.

I put my carto onto my gf's ipro and it fires up just fine. Any suggestions on trouble shooting?


Sent from my HTC Thunderclap using Tapatalk

 

[BuzzKill]

So I'm here at the casino and my ipro decided to stop firing. I hit the button and the led turns blue but there's no power going to the carto.

I put my carto onto my gf's ipro and it fires up just fine. Any suggestions on trouble shooting?


Sent from my HTC Thunderclap using Tapatalk

check the top screw ( ya right you have a screwdriver with you !! ) try pulling the carto center pin out a bit and see if that helps . there is some variation from unit to unit in the screw depth.

 

[ihartmy510]

Thanks for the quick reply mike! I've got a bunch of make shift tools on my keychain I'll try the center pin right now.

Edit* no go on the center pin... Hopefully it doesn't need to go to the buzzpital I'm still on that new pv hype with it. Gah! Haha

Sent from my HTC Thunderclap using Tapatalk

 

[Bovinia]

I know you said the lights are still coming on, but you might try tossing in another set of batts if you have some with you. Try loosening and re-tightening the bottom cap?

 

[ihartmy510]

Tried both of those... Still no go. Thanks for the suggestions! I really hope I don't have to send my beloved ipro out

Sent from my HTC Thunderclap using Tapatalk

 

[Bovinia]

I'm assuming you tried a different carto too? I'm hoping you don't have to send it in either

 

[ihartmy510]

Yupp Yupp tried a different carto as well. Both fire just fine on my gf's ipro. But no love from mine.

Sent from my HTC Thunderclap using Tapatalk

 

[Bovinia]

Well bummer Hopefully someone else will have some ideas for you.

 

[BuzzKill]

Might be the internal screw is loose ??

 

[ihartmy510]

Internal screw under the top cap?

Sent from my HTC Thunderclap using Tapatalk

 

[5cardstud]

You need to test it with a meter to see if it's working. That will be a big step forward then you can go from there.
Also check the top and bottom cap are tight and that the grounding screw is tight.

 

[FranC]

The only probelm I've had to date was because the bottom cap wasen't on tight enough. It's quite touchy. Has to be tight or no fire.

 

[ihartmy510]

Everything is nice ad tight. I need to try to get my hands on a meter

But from swapping everything out it seems I'm not getting any power to the top cap.

Sent from my HTC Thunderclap using Tapatalk

 

[BuzzKill]

Internal screw under the top cap?

Sent from my HTC Thunderclap using Tapatalk

YES , do you get a blue LED ?

 

[ihartmy510]

YES , do you get a blue LED ?

Yupp I get a blue led and that screw is nice and tight

Sent from my HTC Thunderclap using Tapatalk

 

[BuzzKill]

Yupp I get a blue led and that screw is nice and tight

Sent from my HTC Thunderclap using Tapatalk

The one INSIDE right ? if so that is weird you should have power.

 

[ihartmy510]

Yupp Yupp on the inside. Yeah I'm going a bit crazy Haha

Sent from my HTC Thunderclap using Tapatalk

 

[BuzzKill]

Yupp Yupp on the inside. Yeah I'm going a bit crazy Haha

Sent from my HTC Thunderclap using Tapatalk

Damn and NO voltmeter right ?

does the blue led stay on when there is an atty attached ?

can you feel the center post of the atty making contact with the screw in the top ?

 

[ihartmy510]

No voltmeter handy. The blue led stays on when an atty is attached but only when I press the fire button.

Sent from my HTC Thunderclap using Tapatalk

 

[5cardstud]

I can tell you one way to find out if it's firing if you don't have a meter. Turn it up all the way and touch your tongue to the connector then push the button. You will feel a little tingling if it's firing. If it's a 510 you will need to put an adapter on it unless you have a slender tongue that will go that far inside. LMAO