Does the chip in the D2 have a cutoff? Mine seems to stop firing after 7-8 seconds in power mode.
Side note- preorder from 101, no sleeve.
Side note- preorder from 101, no sleeve.
IPV D2 announced.
- Thread starter Completely Average
- Start date
- th_trl_thread_readers 0
- Status
Yeah, I got something I ordered Monday. And something from Croatia that shipped after my ipv 
Didn't come today either. Still sitting in Michigan. I get FT orders faster than this
................
Sorry to hear this Roxy
I personally HATE USPS Service the past year!
10 or 15 second cutoff(forgot to check)
Overheat Protection(mod Side)
Battery Protection(Dipping)
Check function with another fully charged battery. Confirm resistance. Time cut off accurately to determine.
Well after a couple days of use, my only gripe is how easily the battery door comes off. I tried using it without the silicone sleeve and found myself holding it by the battery door and almost having the rest of the mod fall. Overall, I've never been happier with a mod.
Edit: Just squeed it a little right there, now It's perfect.
lol regarding your fix, I was just about to suggest the same thing. I use the sleeve but if you're having problems with the door, taking it off and squeezing it together slightly makes it rock solid.
I received mine yesterday, preorder from 101, and it came with a sleeve. Apparently it is really random whether they are shipping with a sleeve or not. I have not had a chance to fire it up yet, going to stop at a local shop after work today to buy a tank that can run temp control coils.
Anyone have pics of inside this thing?? I am curious, but I am contemplating sending mine back because of reading the resistance .02 low. I am wondering if it is a grounding issue as someone stated earlier.
Well I guess my decision has been made for me. It is now reading the resistance way too high on all my rda's.
Man what a BUMMER, I really really like this mod, now the waiting starts all over... dangit!
Man what a BUMMER, I really really like this mod, now the waiting starts all over... dangit!
Mine's reading about .2 HIGH as compared with my vaporshark. I did mean .2 not .02...
Tap on the mod and see if that makes a difference. I do this to mine and the resistance changes with each tap.. something loose I guess...
you guys need replacements it seems. mine reads .01 low but im not all too sure about my standalone ohm readers quality TBH
Any news on Gearbest just asking as someone said that fasttech have started shipping the D2, too scared to look been waiting since the 10th of July [emoji33] [emoji90]
Sent from my SM-T530 using Tapatalk
Sent from my SM-T530 using Tapatalk
Sorry I have not taken that last step, but I could only afford one Mod this time around and with an uncertain financial future I can't take the risk of messing this one up.
The D2 does however look very simple to open and should be easy to check out if required.
Resistance jump on contact does sound like a loose connection - likely ground attachment.
Jace75,
GearBest Refunded me. Looks like they will not even ship before first of Sept.
The D2 does however look very simple to open and should be easy to check out if required.
Resistance jump on contact does sound like a loose connection - likely ground attachment.
Jace75,
GearBest Refunded me. Looks like they will not even ship before first of Sept.
Last edited:
i haven't had that issue at all with ohms too high. my build reads 0.57 on my ohm reader and 0.55 on my d2
I just received my iPV D2 and the outer box was shrink wrapped. My unit came with a silicone cover. Comparing one RDA, D2 reads .46 ohms and my SXM reads .48 ohms. Nice little unit for the price. I have yet to compare it with TC.
Well, I pulled the trigger on one today from VapeNW for $45. Less than I paid for my 30w Cloupor Mini at the first of the year, to put it in perspective. Lack of step down doesn't worry me, I don't vape anything that needs it (or I can build around it if the need ever does arise).
I like pocket friendly beater mods (my Cloupor still gets a lot of use). And this is a Yihi-powered beater, so bonus. While I really like my SXM and Vaporflasks, they're pampered house pets.
I like pocket friendly beater mods (my Cloupor still gets a lot of use). And this is a Yihi-powered beater, so bonus. While I really like my SXM and Vaporflasks, they're pampered house pets.
review and a giveaway on the iPV D2 by ecigaretteempire.com
Every device will read ohms slightly different. the 510 pin, wiring, solder, chip, metal make up all play a factor.
Last edited:
That's good news. FastTech seems to be slow off the gun these days. It will be interesting to read as to whether you get all the accessories. Contrary to what others have said here, due to FastTech selling below the MSRP, packaging is usually not factory sealed. Anyone who has ever bought a Sigelei or IPV device from FastTech know that the mods often come in the original boxes without certificates of authentication (removed) or even serial numbers (blacked out). All this to avoid trace-back to the supplier. Hopefully FT is not robbing parts from the packages and then re-selling them as extras.
Last edited:
Mine say's it will be here Friday. I will pop the inner cover off and take a look at the 510. I posted a few pages back about fixing a few IPV 510's. They are press fit from the top, then held in from a screw that makes contact with the body. Then the ground is soldered to the head of the screw. Im betting these are the same, the problem is the screw is not making good contact. Its a outdated way of doing things they really should just put Varitube or Fatdaddy 510's in.
Ill let you know what I find. If you have the right tool take those two screws out and take a couple pics. It could void your warranty so just be aware of that.
I never saw FT doing this. When it comes to this stuff, they are honest. Someone said he got confirmed that there IS a sleeve and the cable. We will see when we get it, but I am positive that everything is in there (and the serial number will be removed I guess).
- Status
Similar threads
