iPV Mini?

[Jake67]

Despite all of these small issues, are you folks happy with it overall? The reason I'm asking is I ordered one and I'm hoping out not having buyers remorse.

Like I have said in earlier posts. It's good for 50. If you think it will have accuracy of a high end mod you may be disappointed.
In PWM mode it fires much cooler than it did on my P3. Didn't run any tests. Used the same battery .8 @ 17 watts Resistance is a bit off also.



Sent from my iPhone

 

[DingerCPA]

Vapor Skinz is running their 25% off promo until 1/7. It really does make a big difference in securing your grip on the device.

ooooh, Thanks inswva

 

[erieboyz]

Like I have said in earlier posts. It's good for 50. If you think it will have accuracy of a high end mod you may be disappointed.
In PWM mode it fires much cooler than it did on my P3. Didn't run any tests. Used the same battery .8 @ 17 watts Resistance is a bit off also.



Sent from my iPhone

I know that. I'm basing it off of value. I have a couple high end mods. Just wanted something smaller to take my subtank or lemo around that has better battery life than my vs dna30. That's all.

 

[nopoison]

Despite all of these small issues, are you folks happy with it overall? The reason I'm asking is I ordered one and I'm hoping out not having buyers remorse.

Yes my gf got hers for xmas and she is loving it and I approve!! It works and does a pretty darn good job at that! [emoji2]

 

[erieboyz]

Good stuff. That's all I needed to know. I think it'll look awesome with the subtank and makes me glad I made the purchase.

 

[fredrikstad]

http://www.escoglobal.com/resources/pdf/white-papers/True_G2.pdf

Complicated unless you are into electronics study/theory and it is actually V-average vs. V-rms

Thank you. Yes you are right, that is a little bit complicated, at least for my brain - But is it comfirmed that this device run in RMS (I have understood it`s better for vaping)?
Also, my device has that slight little gap in front from the 510, if it doesn`t bother me visually, will it affect the quality of my vape (coming from an MVP 2.0)? Got it a day or two before Xmas evening, and might be a little late to return it now? As I ordered it here in Norway, my guess will be that the stock is still from 1. run anyway.

 

[fredrikstad]

I asked Yihiecigar about the PWM and DC-DC mode and also if it fire in MEAN or RMS mode.
Her is the answer I got:
"Many thanks for your email and interested in our products.

For this question you mentioned, the sx130 has two modes DC-DC and PWM mods, if you set PWM mode the reading is more accurate.

By the way, can I know you are reselling IPVmini mods or just took one for youself to use?

Any comments, please feel free to advise.

Looking forward to hearing from you.

Best regards,
Amy Lee
"
Actually the opposit of my understanding from this thread, that DC-DC mode were more accurate? But it is more like that I don`t get it yet, or the Chinese woman doesn`t understand my weak English- I trust you peeps more.

 

[fredrikstad]

Gotcha... And that makes sense why Some people reported getting a Harsher Hit at Low Watts using DC-DC Mode vs. PWM.

So, to sum it up...5-10,11 watt PWN mode, and for higher..DC-DC?
Sorry, noob coming from MVP 2.0

 

[froginblender]

I was gonna buy the ipv mini, then I found out about
-Sigelei 30w box mod.
-Clapour mini 30w box mod....and for like $34 bucks....i just may have to grab one of them....looks really well built...both of
the mods i just mentioned.
$36.36 Authentic Cloupor Mini 30W Variable Wattage / Voltage VW VV APV Box Mod - 7-30W / 3.6-7V / anodized aluminum / black at FastTech - Worldwide Free Shipping

Either way, i'll b snatching that thing next friday . and let u know how it works out.

 

[fredrikstad]

Either way, I think you will be Fine. And like your IPV Mini when it arrives.

Some of us Delve into the Technical Depths of All thing Electrical when it New Mod comes out. And Pick apart every Specification. But at the End of the Day, you don't have to Know or Understand much about how a VV/VW Mod works to enjoy it.

Just use it the way you use your Vamo. Start at a Low and slowly increase the Wattage until you have the Hit you are looking for. That's All there Really is.

Let us know when it Arrives. And if you have Any Questions.

Vapers are the most dedicated and helpsome people I ever seen I almost get touched when I read something like that. And it calms me down as well.
How ever, mine is among those where the atty does not sit flush. There is a tiny little gap at one side. I can feel with my finger that the 510 connection is placed slightly off.
Will this effect my vape in any way? Should I ask for a replacement device?
I have bought it from a Norwegian tiny net shop, and most likely, a replacement device will be from the same batch.( I have no clue who his vendor are, if he deal directly with green leaf or how it work). And shipping will be almost around 1/6 ish of the price of the Mod.
The battery cap number is by the way L0829, any "brother`s or sister`s" around?
And last, sorry for the spamming. The questions are popping up, while reading new postings in the thread.

 

[Andrew LB]

Mine is pretty much perfect fit and finish wise, no gap at the 510, and my cap says L0935. I'm going to buy myself a Lemo Drop if I can find one locally. I was considering an Atlantis or Subtank but I want to end the expense of buying coils.

 

[sando7]

my Veritas has been my mainstay on the mini so far and i've tried several atty's, took the plunge and got the Sig mini on preorder gonna compare as soon as i can, would imagine there about the same.......i'm addicted to those shini things, can't hep it

 

[Art Mustel]

I am very happy with mine. Accurate, comfortable without being a "miniature", just the right weight, size and fit to hand. Without being too technical, if at some point (it hppens to me early in the mornings) I find a vape too harsh at lowest wattage, i just set it to PWM. And so the other way. I use it with coils from 1.5ohm to 0.4 ohm., drippers and kayfuns: all sit without a gap. the 510 spring has the longest travel I've seen in a device, including some others VV and mechanicals. The finish is perfect and the feeling you get when you use it is like if you had a much more expensive device.

USB charge works perfectly although I prefer charging it externally, so I can rotate my batteries. The MOBILE charging...i haven't bothered with it, i don't even know if it works and I could not care less, I just haven't pressed the 2 buttons needed to activate it, what for?

I strongly believe that this mod is a game changer. I got mine for under $50. Mine is silver. Cap number is W0596, but I think cap # is only that, a cap #. If it were on mod body I would concede some relevance to it, but on battery cap?

Finally, wanting to renovate my gear for 2015, I purchased a Sigelei 100W plus as well. I love it too! Different beasts, but at the end I use the MINI 70% of the time. And I would buy a second Mini anytime.

 

[capitaomorsa]

I'm also very happy with mine, so happy that I just bought a second one

 

[fredrikstad]

I'm also very happy with mine, so happy that I just bought a second one

That is a great idea. You know, that is exactely what I`m gonna do too, b ut I will wait some time, to second run arrive in Norway

 

[baseballmom]

Got mine a couple of days ago to replace my dead mvp2's....from elev8vape w/ their coupon.....loving it...I don't personally need wattage over 30, I love the replaceable battery, size is nice, menu easy, buttons clicky enough...fits my needs, happy with my purchase, I guess time and use will tell if any issues arise for me, but so far, so good

 

[George Ogilvie]

Got mine a couple of days ago to replace my dead mvp2's....from elev8vape w/ their coupon.....loving it...I don't personally need wattage over 30, I love the replaceable battery, size is nice, menu easy, buttons clicky enough...fits my needs, happy with my purchase, I guess time and use will tell if any issues arise for me, but so far, so good

Got mine on Monday. Gifted my 2 month old MVP to my son as an upgrade to his Spinner II.

 

[George Ogilvie]

My 510 is perfect.

 

[zoiDman]

Vapers are the most dedicated and helpsome people I ever seen I almost get touched when I read something like that. And it calms me down as well.
How ever, mine is among those where the atty does not sit flush. There is a tiny little gap at one side. I can feel with my finger that the 510 connection is placed slightly off.
Will this effect my vape in any way? Should I ask for a replacement device?
I have bought it from a Norwegian tiny net shop, and most likely, a replacement device will be from the same batch.( I have no clue who his vendor are, if he deal directly with green leaf or how it work). And shipping will be almost around 1/6 ish of the price of the Mod.
The battery cap number is by the way L0829, any "brother`s or sister`s" around?
And last, sorry for the spamming. The questions are popping up, while reading new postings in the thread.

I don't think what you mentioned will effect the way it Vapes in anyway. Only how it Looks.

Should you Return it? I dunno? If it Bugs you every time you see it. Then yes. I would. If it is just something that you see and it doesn't Bug you, then I probably Wouldn't.

 

[folkphys]

Vapers are the most dedicated and helpsome people I ever seen I almost get touched when I read something like that. And it calms me down as well.
How ever, mine is among those where the atty does not sit flush. There is a tiny little gap at one side. I can feel with my finger that the 510 connection is placed slightly off.Will this effect my vape in any way? Should I ask for a replacement device?

Same here. I simply hammered that sucker down into proper fitment. Courage, stupidity, unabashed-ness. They are all are one and the same. But at least now I have an IPVmini that is both supremely functional and aesthetically sufficient. Chewed up its top a bit during the unprotected hammering adventure, but since the chew marks are always hidden under a sitting atty-- which will now always be evermore be perfectly non-crooked-- I'm cool with it. It seems that I can easily abide most manner of dents scratches and dings, but woe be unto the mod that does not allow a perfectly flush mount for the atomizer of my choosing.