Is my setup good ?

[sumiquatchim]

Im getting a nice ... setup for something like 0.15-0.20 ohms. I wanna know if its appropriate for low ohm such as 1.5ohm.

From eciggity :
Stillare v2 by infinite (brass)
Ohm meter
Organic cotton
Efest 4 way smart charger


From vape royalty :
Stingray mod clone by hcigar (brass/two-toned)\

From vapordna :
Gplat wire red (22,24 gauge)
Spacejam eliquid

From vivdsmoke :
4 vtc5 18650 30a 2600mah
Battery case


Is it a good sub ohm build ?

Vape On

 

[Equilibrium]

Looks about right. Keep your juice bottle in hand (don't set it down) you'll be getting dry hits about every 3rd - 4th hit running resistance that low.

.15 is too close to a dead short for me.

 

[jaxgator]

.15 is too close to a dead short for me.

I agree.

.15 will be drawing 28 amps off a 30a battery. Too close for me.

 

[GMayberry]

Agreed! Whether your intention is to simply quit smoking, or cloud chasing, I think you will be perfectly happy with .5-.7Ω.

 

[sumiquatchim]

I agree.

.15 will be drawing 28 amps off a 30a battery. Too close for me.

\

What build should i go for to get to atleast .5 ohms(coil build) ? i dont want a short :/

 

[Bob4156]

My suggestion, and preference, is no coil is needed to be built below about .5 ohms. Otherwise either you can sacrifice flavor, burn cotton fast, jeapordize safety etc. I usually actually build either a single 1 ohm coil, or dual coils that come out to about .8 ohms for best flavor, battery life. Anything lower, I just find excessive and uneccessary for my needs. If you want more clouds, just use juice with more VG.

 

[CreepyLady]

This calculator should help with figuring out how to hit the 0.5-0.7 range with your wire, jig diameter, etc.

Coil wrapping | Steam Engine | free vaping calculators

 

[jaxgator]

\

What build should i go for to get to atleast .5 ohms(coil build) ? i dont want a short :/

Not really sure with 22 or 24g wire.

When I rebuilt my Magma the other day, I used 7 wraps of 26g on a 2mm mandrel x2 and came out to .45Ω.

 

[Bob4156]

Also might want to consider stepping up (higher) your gauge of wire, 22 gauge is rather thick.

 

[Equilibrium]

\

What build should i go for to get to atleast .5 ohms(coil build) ? i dont want a short :/

+1 for the steam engine coil calculator, linked above.

Are you familiar with sub-ohm vaping?

Are you familiar with the safety aspects involved with sub-ohm vaping?

 

[sumiquatchim]

+1 for the steam engine coil calculator, linked above.

Are you familiar with sub-ohm vaping?

Are you familiar with the safety aspects involved with sub-ohm vaping?

Well im still researching, and i need someone to teach me more a about it. Kik or somethin.

 

[StrafeMalone]

The Stillare might not have enough airflow for that low of an ohm rating. Airflow plays an important role in keeping your coils from getting to hot and scorching juice and wicks.

 

[sumiquatchim]

The Stillare might not have enough airflow for that low of an ohm rating. Airflow plays an important role in keeping your coils from getting to hot and scorching juice and wicks.

What do you recommend ?

 

[sumiquatchim]

It seems that 0.5 ohms will be enough, can someone give me a exact gauge and setup i need. And then i believe the stillare is going to be ok.

 

[jblack741]

Sounds like your first rig... have you tried normal vape clouds or are you just jumping right into the big leagues? Based on what you've said if you're not careful you can burn your lips, hands and be generally unhappy with vaping because you tried to fly before you learned to walk. just my

 

[sumiquatchim]

Sounds like your first rig... have you tried normal vape clouds or are you just jumping right into the big leagues? Based on what you've said if you're not careful you can burn your lips, hands and be generally unhappy with vaping because you tried to fly before you learned to walk. just my

a ego t twist ..

 

[keonee]

Here's a good thread for coil wrapping -

http://www.e-cigarette-forum.com/forum/reos-mods/446263-micro-coils-ohms-description.html

 

[AnicLyke]

I personally would never go that low. I stay at or above .8 depending on the build, but that's just me.

 

[sumiquatchim]

Here's a good thread for coil wrapping -

It doesnt say wether it is a dual coil, single coil or even parallel.

 

[jaxgator]

All single strand and single coil.