Is my setup good ?
- Thread starter sumiquatchim
- Start date
- th_trl_thread_readers 0
- Status
Out of curiosity.... Why would you want such a low build? Have you ever tried a .5 build? Maybe even a .75 build?
LOL !
I give up...
Ok then how is a littleman box mod by project sub ohm ?
Will that do any good ? Because i wanted that for a long time but its really pricy :/
I can afford anything up to 300 dollars budget.
I hope that made you a bit happy
Can someone on here please take a selfie while blowing a huge cloud from a .8Ω build or higher? Something needs to help this guy get a check on safety. To the OP, please take our posts seriously. You sub-ohming and something terribly bad happening in no way affects any of us. Only you. We are saying all of these things based on our knowledge, and looking out for YOU.
\
Lets just say i get a dna30 running on 0.5 ohms. Just how much clouds are we talking about.
Lets just say that you can get a DNA30 running on 1.5 ohms and you can have clouds that rival what a lot of people get out of 0.3 ohm builds on mech mods...
It's more about the wicking, surface area of the coil, gauge of the wire, wattage of the device, juice that you are using, etc.. etc.. than it is about running super low ohms...
Sub ohm is what is required to make a mechanical mod run at higher wattage (people were doing this before the higher wattage rated variable wattage devices became available... now that variable wattage mods are getting better, sub ohm isn't really necessary to create HUGE CLAUWDS, Brah!!)
A variable wattage mod (such as the DNA30) isn't limited by the resistance of the coil... you can just increase the wattage to get the same effect in a much safer manner...
It's more about the wicking, surface area of the coil, gauge of the wire, wattage of the device, juice that you are using, etc.. etc.. than it is about running super low ohms...
Sub ohm is what is required to make a mechanical mod run at higher wattage (people were doing this before the higher wattage rated variable wattage devices became available... now that variable wattage mods are getting better, sub ohm isn't really necessary to create HUGE CLAUWDS, Brah!!)
A variable wattage mod (such as the DNA30) isn't limited by the resistance of the coil... you can just increase the wattage to get the same effect in a much safer manner...
So 4.2 volts at 30watts gives me 0.5 ohms which is the key. Well ok then i shall use a dna30 by cloupor. Any links on a black one that ships to canada.
And for freaking gods sake is canvape.com safe to buy ejuice from ?
You're still missing the point... and I am now exhausted in trying to explain it...
I don't know anything about canvape... never ordered from there, but you could check in the International forum, Canada sub-forum and see what they are suggesting over there..
I don't know anything about canvape... never ordered from there, but you could check in the International forum, Canada sub-forum and see what they are suggesting over there..
Give me one more explanation, if i did not understand it then i might aswell be a huge .......
Those are the point... you can get the cloud volume that you are looking for WITHOUT going below 1.0 ohm! Sub-ohm was a way to get higher wattage on a NON-variable wattage device that had a relatively set voltage. VV-VW devices allow you to get the same thing on a > 1.0 ohm coil.
I knew that :/
Would the stillare go along with the black ivp2 ? I was looking at a review on it. I dont like that dna30 by cloupor. The one i really loved was the dna30 by vapor shark and the ipv2. Should i go for a stillare v2 with maybe a 1 ohm build for the flavor?
i want a really good flavor conductive rda. Clone or not doesnt matter.
The IVP2 is a solid mod... up to 50W and the stillare will work on it. I think the Tobh is probably a better RDA (with a little modification). 
Rip did a build on it a quad parallel with 30 gauge seems like it gives a killer FLAVOR !The IVP2 is a solid mod... up to 50W and the stillare will work on it. I think the Tobh is probably a better RDA (with a little modification).
Might go for plume vail ? maybe not, i dont wanna give a sure answer.
LOL !
Ok then how is a littleman box mod by project sub ohm ?
Will that do any good ? Because i wanted that for a long time but its really pricy :/
I can afford anything up to 300 dollars budget.
I hope that made you a bit happy
Sorry, I can rebuild, but posting in a forum I haven't quite figured out. Anyway that Littleman is quite an evolution in vape badassery. Only they seem to sell out in seconds on the rare times when they're actually available. Tonight project subohm releases an entirely affordable RDA that looks quite nice from what I've seen.
So, it's a one time deal since grammy's smugglin' in the goods, and then your going to be exposed to rebuilding for the 1st time w/ a $300 vape budget grab bag full of advanced, tech recent, gear.
If anything listen to this: This .... ain't easy (even having done extensive research w/ Rip n friends). Things will be frustrating; especially without the standard tools that are about as important as the goods your building on, when your just starting out.Now since your getting a one time hook-up I suggest going with a starter rig, and then also whatever advanced rig your settling on. The DNA 30 will be invaluable since exact specifications of your build will have a wider area of potential ..... up. With a mech you'll have to rebuild often to try different qualities of vaping whereas the box mod will just need the push of a button o get an idea of what direction you'd like to flow in. Get both, and get educated. Also, for the starter rig grab a double post (for single coil) like the Igo L. You don't want to have to build a double coil for your 1st experience with an RDA, and many don't give the option for a single even with airflow adjustment. VaperDna where u probably saw the Littleman, will actually pre-drill a bigger hole in the Igo-L for you.
The less headaches the better, but you'll also want to advance as u play your gear out, which will most likely be temporarily; I always go back to old gear with new setup experimentation, and I'm still rockin' my ancient Igo L. That little double-posted ....... is straight titties my Iranian friend, and just like I can single fist a spliff while simultaneously driving stick, and housin' a BigMac. I can wrap, wick, and drip that little old-school cloud-chaser in the dark quicker than you will figure out how to get the top cap off a dripper....... And I've been where u are. ...., I can remember being so frustrated at times that I have rage-quit while ripping wrapped kanthal right out of a tightened post after trying to seat the F#%$&N thing in some inferior pos half-clone for the past hour. It will take time, but progress is inevitable eventually, and the easier you can make the climb, to vape enlightenment.
Better yet. Dude, take half your budget and stack a cart at FastTech.com (read the reviews) as if the FDA was layin down law with quickness. After that all u will need is time to experiment, and the internet. Then, not too far down the road I'm sure vaping will be as boss as u think it is, and probably far more.
Good Luck Sumi.
If you have to ask that question, you're not ready for sub ohming. Not trying to be rude, just trying to help you out.
Sent from my iPhone using Tapatalk
This guy has started a few other scary threads since this one, has gotten some direct advice that he has shunned off, and since then has "moved on." Under his name "moved on" means he has left the site. I worry for him.....
We'll see him again, GMayberry... prolly in the news or on a youtube video showing the carnage of the uninformed getting into sub-ohm territory without the proper tools and knowledge...
He can't claim ignorance - we warned him over and over!!
It'll be one of those - "Aww that'll NEVER happen to me" kinda deals.
He can't claim ignorance - we warned him over and over!!
It'll be one of those - "Aww that'll NEVER happen to me" kinda deals.
Very, VERY true!! My only hope is that he went with the regulated mod (IVP 2 if I remember correctly), then at least that'll give him some safety factor, but I'm pretty sure he'll still end up with a mech bomb at some point... he definitely can't say we didn't warn him... in fact, that's probably why he left. We wouldn't support his ignorance...
- Status
Similar threads
- Locked
