No idea how it works but since we both ordered one guess we got some learning to do. At least there is only two colors so far lol
Is there an ETA on the Infinity Pro?????????
- Thread starter FranC
- Start date
- th_trl_thread_readers 0
- Status
No idea how it works but since we both ordered one guess we got some learning to do. At least there is only two colors so far lol
5card, We know how to use the infinity pro... it is the VVPV that we have no clue about!
Well, a bottom feeder injects juice from bottom of the atty when you squeeze the bottle. A top feeder drips juice down on top of the atty. The VVPV simplifies the standard dripping method by adding a hose that connects above the atty with the same bottle feeding set up of a bottom feeder. This kind of set up means you don't have carry a bottle of juice around with you and drip manually as the bottle is self contained in the VVPV.
That description is perfect, sounds like I should go 901 atty, not bother munging around with 808 cartos 
It also has the same electronics as the Buzz Pro and the Infinity Pro. You open the little door on the side and pull the bottle out. If your careful you can unscrew it from the pump without removing the tube. Either way fill the bottle with your scrumptious tasting juice and screw the bottle back onto the pump cap and replace it into the VVPV where it came from. replace the door. Put your favorite atty on it, put the tip with the tube into the atty, give it a couple pumps and vape. when it needs more juice just give it another pump or two on the pump button. To charge the battery plug the charger into the wall and insert the plug into the charger port on the VVPV. If you have any other problems just PM me and I will help you.
Here is a picture that was in another thread that I diagrammed and shows the door, bottle placement, and how the door works.
Here is a picture that was in another thread that I diagrammed and shows the door, bottle placement, and how the door works.
Last edited:
Thanks! It's just that I come from an 808 carto background, and it dawned on me that staying 808 for using this mod likely doesn't make sense, that going to a 901 atty (with some kind of tip?) is probably the best use of it.
(I want to use the best liquid heating HW to go with the battery/feeder. Probably an Ikenvapes 3 ohm or thereabouts atty, if available. Any particular kind of tip that you then attach to it?)
(I want to use the best liquid heating HW to go with the battery/feeder. Probably an Ikenvapes 3 ohm or thereabouts atty, if available. Any particular kind of tip that you then attach to it?)
would really like an ETA on this, debating whether to buy an old Infinity for my friend or wait for the new one.. and also the Price or any other details if possible
also can someone tell me the difference between this and the old version? went on the website and dont' see nothing
also can someone tell me the difference between this and the old version? went on the website and dont' see nothing
New Infinity Pro specs Infinity
We are 4-5 weeks out now .
there are several differences
1. New tech controller with higher current output ( works with LR attys )
2. new top cap design
3. better tubes
Last edited:
same electronics as the BUZZ PRO ... all the Pro's do.
regulated variable power only the way Mike does it.
With dial adjustable voltage (the old one has that too)
With improved much stronger and more beautiful body and materials.
Price is great; less than the Buzz Pro.
regulated variable power only the way Mike does it.
With dial adjustable voltage (the old one has that too)
With improved much stronger and more beautiful body and materials.
Price is great; less than the Buzz Pro.
Loving this already... top feeder with reg/vv and lr capable....
How drippable is it? can you drip with the juice feed attached?
I know some of the details are not finalized, and have faith that the most optimal decisions will be made... but if it could drip a different juice to what's in the bottle, would be a good feature if possible.
Will the d/t be changeable or fixed with feeder tube?
curious to see how the final feeder / d/t system ends up.
How drippable is it? can you drip with the juice feed attached?
I know some of the details are not finalized, and have faith that the most optimal decisions will be made... but if it could drip a different juice to what's in the bottle, would be a good feature if possible.
Will the d/t be changeable or fixed with feeder tube?
curious to see how the final feeder / d/t system ends up.
It also has the same electronics as the Buzz Pro and the Infinity Pro. You open the little door on the side and pull the bottle out. If your careful you can unscrew it from the pump without removing the tube. Either way fill the bottle with your scrumptious tasting juice and screw the bottle back onto the pump cap and replace it into the VVPV where it came from. replace the door. Put your favorite atty on it, put the tip with the tube into the atty, give it a couple pumps and vape. when it needs more juice just give it another pump or two on the pump button. To charge the battery plug the charger into the wall and insert the plug into the charger port on the VVPV. If you have any other problems just PM me and I will help you.
Here is a picture that was in another thread that I diagrammed and shows the door, bottle placement, and how the door works.
I think I am going to leave it as a silicone tube , much easier to deal with in most cases , just remove the tip and drip .
Last edited:
- Status
