Is there any chance.....

[Drozd]

no problem. I know you're a busy man. I just figured there's that old saying ...out of sight.... ya know... so thought I'd give it a bump

----------

Yeah I'm pretty sure that is one of the ones I won't buy grimmer but thanks for the tip(no pun intended).

----------

Thanks Drozd not a bad idea but I'm to lazy for all that and will wait patiently for David to offer them.

lol....NP...I over complexified the description for those following at home....the reality is after cutting that last third of the cart...I put it on the atty and vaped like a madman (read that as chain vaped as normal) and let the atty heat the plastic and then took it off and slowly stretched it with the top of a nic juice bottle til a shorty t tip could be jammed into it and tapped tight...

 

[leroytwohawks]

I would love to have a Stainless Steel one from Dave!!! I do have several from the other guy, you gotta do what you gotta do!!! And I must say I love the vapor and throat hit I get from the low res 306, compared to the 510 for dripping with the said tip it's just more intense. So Dave when you get caught up, I would love to see what you come up with!!! I know it will be fantastic.

Kevin

 

[atavanhalen]

David I just ordered 5 306 atties because I ordered 2 and I love them so much but I was thinking since I saw that you will update old ttips to the new wide mouth for free, I can send you one along with my brass ttip so you could have one to work with. I think there is a pretty decent demand for these things, I was so desperate for one that I ordered one from the only place I know of that has them even though he makes a profit on his shipping! That is one of my biggest pet peeves. It really would be great to have a SS 306 TTip. and I would only have to pay 1.25 to have it shipped instead of 7 bucks,.

 

[forcedfuel50]

David I just ordered 5 306 atties because I ordered 2 and I love them so much but I was thinking since I saw that you will update old ttips to the new wide mouth for free, I can send you one along with my brass ttip so you could have one to work with. I think there is a pretty decent demand for these things, I was so desperate for one that I ordered one from the only place I know of that has them even though he makes a profit on his shipping! That is one of my biggest pet peeves. It really would be great to have a SS 306 TTip. and I would only have to pay 1.25 to have it shipped instead of 7 bucks,.

Sweet, i really appreciate that! Now i can check out a 306

Ship to:
Super T
Box 331
Sauk Rapids, MN 56379

 

[leroytwohawks]

I was so desperate for one that I ordered one from the only place I know of that has them even though he makes a profit on his shipping! That is one of my biggest pet peeves. It really would be great to have a SS 306 TTip. and I would only have to pay 1.25 to have it shipped instead of 7 bucks,.

Well yes he does charge a lot for shipping but you always get that genuine imitation simulated velvet drawstring bag with every order and I'm sure he sees that as making all the difference, ya right!!!

David, I'm not referring to you in this post about the bag, people who have ordered from the other guy know what I mean.

Kevin

 

[Switched]

Well yes he does charge a lot for shipping but you always get that genuine imitation simulated velvet drawstring bag with every order and I'm sure he sees that as making all the difference, ya right!!!

David, I'm not referring to you in this post about the bag, people who have ordered from the other guy know what I mean.

Kevin

Really I would have never guessed

 

[atavanhalen]

Well yes he does charge a lot for shipping but you always get that genuine imitation simulated velvet drawstring bag with every order and I'm sure he sees that as making all the difference, ya right!!!

David, I'm not referring to you in this post about the bag, people who have ordered from the other guy know what I mean.

Kevin

Oh yeah I forgot about about the bags maybe I can list the 3 that I have on ebay to re-coop my shipping costs.

 

[atavanhalen]

Just so everyone knows, I sent out a 306 to David so hopefully we will see something in the not to distant future. I am not speaking for David I am just hoping.

 

[JRWReich]

Sweet, i really appreciate that! Now i can check out a 306

Ship to:
Super T
Box 331
Sauk Rapids, MN 56379

Hey Dave... be careful about the sizes. After further research I have found that there are 2 sizes of LR 306's. Joye makes one and the one Drew sells, I have heard, are Ciscos. Drews tip only fits on Drews attys. Get your 306 from Steve at puresmoker or rockymountainvapor and build the tips to fit those.

 

[buGG]

yeah boge and joye are the two (if not three) different manufacturers here. +1 for the joye t-tips, but at the same time, from a sales perspective it seems that most suppliers are currently carrying other brands/ sizes.

 

[Drozd]

Hey Dave... be careful about the sizes. After further research I have found that there are 2 sizes of LR 306's. Joye makes one and the one Drew sells, I have heard, are Ciscos. Drews tip only fits on Drews attys. Get your 306 from Steve at puresmoker or rockymountainvapor and build the tips to fit those.

there's the joye 306s.... the LR ones cisco makes and supplies to nhaler and ELP...and then there's another LR that a few other places like COV carry..
yeah rumor is that the ones cisco makes are a slightly different size...


As for the gripe about drew's shipping....it is what it is...I've no problems with it... then again I'm not ordering 1 tip or just 1 atty...it's usually more than that...and the 10% off eats the shipping and brings it on par with almost everyone else...
he could just flat rate everything but that's still $5 for the smallest box...
with the volume he deals in I'm sure they don't have time to individually weigh and charge shipping that way...there is a cost for shipping materials...so yeah if I'm ordering $40 and paying $3 shipping that aint so bad...or $80 and getting a very slight discount on the product and essentially free shipping...

 

[atavanhalen]

there's the joye 306s.... the LR ones cisco makes and supplies to nhaler and ELP...and then there's another LR that a few other places like COV carry..
yeah rumor is that the ones cisco makes are a slightly different size...


As for the gripe about drew's shipping....it is what it is...I've no problems with it... then again I'm not ordering 1 tip or just 1 atty...it's usually more than that...and the 10% off eats the shipping and brings it on par with almost everyone else...
he could just flat rate everything but that's still $5 for the smallest box...
with the volume he deals in I'm sure they don't have time to individually weigh and charge shipping that way...there is a cost for shipping materials...so yeah if I'm ordering $40 and paying $3 shipping that aint so bad...or $80 and getting a very slight discount on the product and essentially free shipping...

All I am saying is that I think he should offer a first class option for small orders so the people that do not have the luxury of placing 40 to 50 dollar orders every time will not have to pay seven dollars for a package of cartos.

 

[Thyestean]

Hey Dave... be careful about the sizes. After further research I have found that there are 2 sizes of LR 306's. Joye makes one and the one Drew sells, I have heard, are Ciscos. Drews tip only fits on Drews attys. Get your 306 from Steve at puresmoker or rockymountainvapor and build the tips to fit those.

Just so everyone knows, I sent out a 306 to David so hopefully we will see something in the not to distant future. I am not speaking for David I am just hoping.

So just out of curiosity do you know which one the one you sent was?

I get all of my attys from Shawn at LitecigUSA so I use the Joye306 myself.

If it turns out the one you sent is one of the others then I'll ship David a Joye one, if he wants, so he can check the difference for himself.

 

[forcedfuel50]

Yes, i received one in the mail from a most generous individual! do you know where your purchased this one?

 

[buGG]

seems like it was a BOGE Tech LR306 from Nhaler which may or may not also be the manufacturer and/or same specs as the Cisco LR306 that Nhaler has had for at least a week now.

 

[atavanhalen]

So just out of curiosity do you know which one the one you sent was?

I get all of my attys from Shawn at LitecigUSA so I use the Joye306 myself.

If it turns out the one you sent is one of the others then I'll ship David a Joye one, if he wants, so he can check the difference for himself.

Yes, i received one in the mail from a most generous individual! do you know where your purchased this one?

I do believe it is from litecigusa but there is a very small chance it is from RMV but I think they carry the same ones. I can't wait to see a sweet ss ttip for this.

 

[Switched]

Only 2 places sell the Cisco 306 LR. E liquid planet and Nhaler. That is directly from the horses mouth (Cisco). Down the road this might change, but for the time being...

 

[Thyestean]

I do believe it is from litecigusa but there is a very small chance it is from RMV but I think they carry the same ones. I can't wait to see a sweet ss ttip for this.

Great

 

[laurieok]

Great

I second that!!

 

[atavanhalen]

Hey Dave... be careful about the sizes. After further research I have found that there are 2 sizes of LR 306's. Joye makes one and the one Drew sells, I have heard, are Ciscos. Drews tip only fits on Drews attys. Get your 306 from Steve at puresmoker or rockymountainvapor and build the tips to fit those.

I have a tip from drew and it fits the ones from litecig and rmv.