Itaste mvp settings questions.

[nelska]

vw: 6-11
vv: 3.3-5
http://thelocust.net/ohm/
so, I have one tank at 1.5 ohms and one at 2.0 ohms.

i run the 1.5 ohms tank at 4.0volts on wattage mode set to 10.5 watts.
and the 2.0 ohms tank at 4.8 volts on wattage mode set to 11 watts.

This is the dilemma.. I want to run the 1.5 ohms tank at 4.8 volts but set to that it calls for ~15 watts.
Which the mvp doesnt provide, so here's the question.. Should I just stick to 2.0 ohm tank or risk the overlying ampage?

Because 2.0 ohms rounds out on an itaste mvp2.0.
And if none of this isnt making any sense please feel free to reply with anything that would help. lol, thanks.

 

[steved5600]

You have a 3 amp limit if your using the MVP 2. So if you went 1.5 ohms and 4.8 volts you would exceed that 3 amp limit. It would be 3.2 amps. So i would not attempt it. I'd bet it would not let you do that anyway but don't try it. Not worth frying the mod.

 

[DavidOck]

This is true for all VW / VV mods. You pick the mode, VW OR VV.

If you pick VW, the mod will automatically adjust the voltage to deliver that power setting. You do NOT set both.

If you want to run your 1.5 Ω coil at that specific voltage (4.8) your source would need to provide about 15.4 watts, so the MVP2 won't get there. It should regulate within it's capabilities, but as Steve says, why risk your mod?

It's generally recommended to keep coils in the 1.8 - 2.8 range for a wider adjustment range on that type of source.