Ithaka official

[Bishopheals]

Here is another Build I did for us Crazy People that Love and enjoy high heat low ohms. Made a .2 ohms Quad Highlander coils.
Keep in mind this is not meant for the novice vapor.

 

[fixlyob]

Yesterday I change the e-liquid that I use 75% PG and 25% VG for 50-50 and I liked very much the HT was down and the moist and flavor are superb, this is the best way for me to use with Ithaka and maybe I don't change to use less nicotine this is wonderful.

Imeo I need the new spares to convert my old Ody into a another Ithaka, lol, because my wife try it and she said that she will keep the Ithaka for her

But I hope if I can't distract her with the Penelope for a while until I can buy a new Ithaka or the spares to convert my Ody.


Cheers

 

[MikeK0416]

Incredibly easy and effective build and absolutely no leaks whatsoever. Great job Imeo!

 

[Cloud Wizard]

Here is another Build I did for us Crazy People that Love and enjoy high heat low ohms. Made a .2 ohms Quad Highlander coils.
Keep in mind this is not meant for the novice vapor.

You're nuts Bish.... I do have to give kudos on your needle-nosed plier/wire splicing skills. I ordered a spark-o-matic to weld NR-R-NR (in transit now) as I've tried every method of twisting (failed), 1mm silver bead crimps (pain in the "A") and Ready Wires (work great! but limited to 1.5Ω).

 

[subver]

Oh by the way, did you guys torch or clean your ceramics before setting up?

 

[justinred]

Oh by the way, did you guys torch or clean your ceramics before setting up?

I torched mine. Force of habit from pene and ody.

 

[MikeK0416]

so the wick that came with the unit is 3mm?

 

[RiverNut]

mine seemed thicker...maybe 3.5mm

 

[MikeK0416]

thanks that is what I was wondering. Seems like I need 3.5mm for my ody to keep it from leaking.

 

[Cloud Wizard]

Oh by the way, did you guys torch or clean your ceramics before setting up?

No torching but I did do a full tear-down followed by PGA cleaning of metal parts and warm water/dish soap wash of plastic/rubber. I've found that there is always some remnants of the manufacturing process (grease or residue) on handmade/machined items. I do still torch my silica just from habit (don't think it's necessary with the COV 3mm).

 

[Waho]

Nothing beats Imeo's work, until he releases the next one! Ithaka is no exception.

Went with the X dual coil for my first attempt, twin 2.4 ohm coils on 3mm wick for a total of 1.2 ohm. Basic feed wide open. Absolutely blown away by the vapor and flavor compared to a single 1.2 ohm coil in iAtty, Ody, or Penny!

Definitely worth the wait. My only regret is it makes my dirty GGTS look even worse!

Big shout out to Bish as I watched his video while Ithaka was in the ultrasonic cleaner.

Awesome job Imeo, you continue to innovate the ecig world again and again

 

[Ryd1ZZ]

You're nuts Bish.... I do have to give kudos on your needle-nosed plier/wire splicing skills. I ordered a spark-o-matic to weld NR-R-NR (in transit now) as I've tried every method of twisting (failed), 1mm silver bead crimps (pain in the "A") and Ready Wires (work great! but limited to 1.5Ω).

Do you have a link for that spark-o-matic? I need more info about this

Galaxy S3/Tapatalk 2

 

[Cloud Wizard]

Do you have a link for that spark-o-matic? I need more info about this

Galaxy S3/Tapatalk 2

Here's a thread from the original creator (The Spark-O-Matic - Wire Arc Welding for coil making) but I bought mine from a modder (Pancho from VP)

 

[DHumberson]

Finally arrived. The Ithaka is awesome. Ran a single coil 1.5 ohm on x wicks. Tastes awesome. When I have more time I plan on a dual coil highlander set up. Ithaka number is 1882.

Only issue I am having is a slight bit of leaking... Only around the wings and serial number. Confused as to why

 

[Alireza355]

hi imeo, i am getting this little gurgling/little flooding on my ithaka, even though i have the liquid control always closed and only using the basic feeding, and i have the ceramic bottom holes visible to feed the flooded juice back to the wicks... can you help me out? does it have anything to do with the pg/vg ratio? i'm using 70/30

 

[imeothanasis]

do you have o-rings on the clear window DH? There is no way for Ithaka to leak from anywhere, especially on that point.The only I can think off is a cracked clear window

Finally arrived. The Ithaka is awesome. Ran a single coil 1.5 ohm on x wicks. Tastes awesome. When I have more time I plan on a dual coil highlander set up. Ithaka number is 1882.

Only issue I am having is a slight bit of leaking... Only around the wings and serial number. Confused as to why

 

[imeothanasis]

Ithaka works the same with all juices Ali my friend. This small gurgling comes from the adjustable post that holds a tiny quantity of juice. If you use GGTS then remove the adjustable pin and check again.

Also, you can take 5-6 quick and hard inhales without pushing the button or blow air via mouthpiece and gurgling will leave

hi imeo, i am getting this little gurgling/little flooding on my ithaka, even though i have the liquid control always closed and only using the basic feeding, and i have the ceramic bottom holes visible to feed the flooded juice back to the wicks... can you help me out? does it have anything to do with the pg/vg ratio? i'm using 70/30

 

[Amirite]

Love love love love my Ithaka(s). Thank you Mr. Imeo!

 

[imeothanasis]

The only I have to say is "just great" guys and girls! I am 10 times more happy than you when I see that you are totally satisfied with Ithaka.

 

[DHumberson]

Imeo I do have the o rings in place. My only thought was maybe screwed on the top cap to tight and it created some extra pressure. Very minimal leaking. However it is coming not from the clear window. It is below the wings where it meets the gg base